libata: add human-readable error value decoding

This adds human-readable decoding of the ATA status and error registers
(similar to what drivers/ide does) as well as the SATA Serror register
to libata error handling output.  This prevents the need to pore
through standards documents to figure out the meaning of the bits
in these registers when looking at error reports.  Some bits that
drivers/ide decoded are not decoded here, since the bits are either
command-dependent or obsolete, and properly parsing them would add
too much complexity.

Signed-off-by: Robert Hancock <hancockr@shaw.ca>

[edited slightly to make output a bit more symmetric]
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 45 insertions, 0 deletions

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 5f2c0f376f7..0bd3898793a 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1911,6 +1911,27 @@ static void ata_eh_link_report(struct ata_link *link)
                         ata_link_printk(link, KERN_ERR, "%s\n", desc);
         }
 
+        if (ehc->i.serror)
+                ata_port_printk(ap, KERN_ERR,
+                  "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
+                  ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
+                  ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
+                  ehc->i.serror & SERR_DATA ? "UnrecovData " : "",
+                  ehc->i.serror & SERR_PERSISTENT ? "Persist " : "",
+                  ehc->i.serror & SERR_PROTOCOL ? "Proto " : "",
+                  ehc->i.serror & SERR_INTERNAL ? "HostInt " : "",
+                  ehc->i.serror & SERR_PHYRDY_CHG ? "PHYRdyChg " : "",
+                  ehc->i.serror & SERR_PHY_INT_ERR ? "PHYInt " : "",
+                  ehc->i.serror & SERR_COMM_WAKE ? "CommWake " : "",
+                  ehc->i.serror & SERR_10B_8B_ERR ? "10B8B " : "",
+                  ehc->i.serror & SERR_DISPARITY ? "Dispar " : "",
+                  ehc->i.serror & SERR_CRC ? "BadCRC " : "",
+                  ehc->i.serror & SERR_HANDSHAKE ? "Handshk " : "",
+                  ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "",
+                  ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "",
+                  ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "",
+                  ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "" );
+
         for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
                 static const char *dma_str[] = {
                         [DMA_BIDIRECTIONAL]     = "bidi",
@@ -1942,6 +1963,30 @@ static void ata_eh_link_report(struct ata_link *link)
                         res->hob_lbal, res->hob_lbam, res->hob_lbah,
                         res->device, qc->err_mask, ata_err_string(qc->err_mask),
                         qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
+
+                if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
+                                    ATA_ERR) ) {
+                        if (res->command & ATA_BUSY)
+                                ata_dev_printk(qc->dev, KERN_ERR,
+                                  "status: { Busy }\n" );
+                        else
+                                ata_dev_printk(qc->dev, KERN_ERR,
+                                  "status: { %s%s%s%s}\n",
+                                  res->command & ATA_DRDY ? "DRDY " : "",
+                                  res->command & ATA_DF ? "DF " : "",
+                                  res->command & ATA_DRQ ? "DRQ " : "",
+                                  res->command & ATA_ERR ? "ERR " : "" );
+                }
+
+                if (cmd->command != ATA_CMD_PACKET &&
+                    (res->feature & (ATA_ICRC | ATA_UNC | ATA_IDNF |
+                                     ATA_ABORTED)))
+                        ata_dev_printk(qc->dev, KERN_ERR,
+                          "error: { %s%s%s%s}\n",
+                          res->feature & ATA_ICRC ? "ICRC " : "",
+                          res->feature & ATA_UNC ? "UNC " : "",
+                          res->feature & ATA_IDNF ? "IDNF " : "",
+                          res->feature & ATA_ABORTED ? "ABRT " : "" );
         }
 }