[PATCH] backlight: LOCOMO Backlight Driver updates

Add backlight intensity control to the LOCOMO lcd/backlight driver using the
backlight class and add basic power management support.

This is a reimplementation and improvement of patches by John Lenz and Pavel
Machek

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

3 files changed, 116 insertions, 17 deletions

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index b895eaaa73f..02f15297a02 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -50,6 +50,14 @@ config BACKLIGHT_CORGI
           If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y to enable the
           backlight driver.
 
+config BACKLIGHT_LOCOMO
+        tristate "Sharp LOCOMO LCD/Backlight Driver"
+        depends on BACKLIGHT_DEVICE && SHARP_LOCOMO
+        default y
+        help
+          If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
+          enable the LCD/backlight driver.
+
 config BACKLIGHT_HP680
         tristate "HP Jornada 680 Backlight Driver"
         depends on BACKLIGHT_DEVICE && SH_HP6XX
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 744210c38e7..65e5553fc84 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -4,4 +4,4 @@ obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
 obj-$(CONFIG_BACKLIGHT_CORGI)   += corgi_bl.o
 obj-$(CONFIG_BACKLIGHT_HP680)   += hp680_bl.o
-obj-$(CONFIG_SHARP_LOCOMO)      += locomolcd.o
+obj-$(CONFIG_BACKLIGHT_LOCOMO)  += locomolcd.o
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
index 60831bb2368..bd879b7ec11 100644
--- a/drivers/video/backlight/locomolcd.c
+++ b/drivers/video/backlight/locomolcd.c
@@ -17,6 +17,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
 
 #include <asm/hardware/locomo.h>
 #include <asm/irq.h>
@@ -25,7 +27,10 @@
 
 #include "../../../arch/arm/mach-sa1100/generic.h"
 
+static struct backlight_device *locomolcd_bl_device;
 static struct locomo_dev *locomolcd_dev;
+static unsigned long locomolcd_flags;
+#define LOCOMOLCD_SUSPENDED     0x01
 
 static void locomolcd_on(int comadj)
 {
@@ -89,12 +94,10 @@ void locomolcd_power(int on)
         }
 
         /* read comadj */
-        if (comadj == -1) {
-                if (machine_is_poodle())
-                        comadj = 118;
-                if (machine_is_collie())
-                        comadj = 128;
-        }
+        if (comadj == -1 && machine_is_collie())
+                comadj = 128;
+        if (comadj == -1 && machine_is_poodle())
+                comadj = 118;
 
         if (on)
                 locomolcd_on(comadj);
@@ -105,26 +108,100 @@ void locomolcd_power(int on)
 }
 EXPORT_SYMBOL(locomolcd_power);
 
-static int poodle_lcd_probe(struct locomo_dev *dev)
+
+static int current_intensity;
+
+static int locomolcd_set_intensity(struct backlight_device *bd)
+{
+        int intensity = bd->props->brightness;
+
+        if (bd->props->power != FB_BLANK_UNBLANK)
+                intensity = 0;
+        if (bd->props->fb_blank != FB_BLANK_UNBLANK)
+                intensity = 0;
+        if (locomolcd_flags & LOCOMOLCD_SUSPENDED)
+                intensity = 0;
+
+        switch (intensity) {
+        /* AC and non-AC are handled differently, but produce same results in sharp code? */
+        case 0: locomo_frontlight_set(locomolcd_dev, 0, 0, 161); break;
+        case 1: locomo_frontlight_set(locomolcd_dev, 117, 0, 161); break;
+        case 2: locomo_frontlight_set(locomolcd_dev, 163, 0, 148); break;
+        case 3: locomo_frontlight_set(locomolcd_dev, 194, 0, 161); break;
+        case 4: locomo_frontlight_set(locomolcd_dev, 194, 1, 161); break;
+
+        default:
+                return -ENODEV;
+        }
+        current_intensity = intensity;
+        return 0;
+}
+
+static int locomolcd_get_intensity(struct backlight_device *bd)
+{
+        return current_intensity;
+}
+
+static struct backlight_properties locomobl_data = {
+        .owner          = THIS_MODULE,
+        .get_brightness = locomolcd_get_intensity,
+        .update_status  = locomolcd_set_intensity,
+        .max_brightness = 4,
+};
+
+#ifdef CONFIG_PM
+static int locomolcd_suspend(struct locomo_dev *dev, pm_message_t state)
+{
+        locomolcd_flags |= LOCOMOLCD_SUSPENDED;
+        locomolcd_set_intensity(locomolcd_bl_device);
+        return 0;
+}
+
+static int locomolcd_resume(struct locomo_dev *dev)
+{
+        locomolcd_flags &= ~LOCOMOLCD_SUSPENDED;
+        locomolcd_set_intensity(locomolcd_bl_device);
+        return 0;
+}
+#else
+#define locomolcd_suspend       NULL
+#define locomolcd_resume        NULL
+#endif
+
+static int locomolcd_probe(struct locomo_dev *dev)
 {
         unsigned long flags;
 
         local_irq_save(flags);
         locomolcd_dev = dev;
 
+        locomo_gpio_set_dir(dev, LOCOMO_GPIO_FL_VR, 0);
+
         /* the poodle_lcd_power function is called for the first time
          * from fs_initcall, which is before locomo is activated.
          * We need to recall poodle_lcd_power here*/
-#ifdef CONFIG_MACH_POODLE
-        locomolcd_power(1);
-#endif
+        if (machine_is_poodle())
+                locomolcd_power(1);
+
         local_irq_restore(flags);
+
+        locomolcd_bl_device = backlight_device_register("locomo-bl", NULL, &locomobl_data);
+
+        if (IS_ERR (locomolcd_bl_device))
+                return PTR_ERR (locomolcd_bl_device);
+
+        /* Set up frontlight so that screen is readable */
+        locomobl_data.brightness = 2;
+        locomolcd_set_intensity(locomolcd_bl_device);
+
         return 0;
 }
 
-static int poodle_lcd_remove(struct locomo_dev *dev)
+static int locomolcd_remove(struct locomo_dev *dev)
 {
         unsigned long flags;
+
+        backlight_device_unregister(locomolcd_bl_device);
         local_irq_save(flags);
         locomolcd_dev = NULL;
         local_irq_restore(flags);
@@ -136,19 +213,33 @@ static struct locomo_driver poodle_lcd_driver = {
                 .name = "locomo-backlight",
         },
         .devid  = LOCOMO_DEVID_BACKLIGHT,
-        .probe  = poodle_lcd_probe,
-        .remove = poodle_lcd_remove,
+        .probe  = locomolcd_probe,
+        .remove = locomolcd_remove,
+        .suspend = locomolcd_suspend,
+        .resume = locomolcd_resume,
 };
 
-static int __init poodle_lcd_init(void)
+
+static int __init locomolcd_init(void)
 {
         int ret = locomo_driver_register(&poodle_lcd_driver);
-        if (ret) return ret;
+        if (ret)
+                return ret;
 
 #ifdef CONFIG_SA1100_COLLIE
         sa1100fb_lcd_power = locomolcd_power;
 #endif
         return 0;
 }
-device_initcall(poodle_lcd_init);
 
+static void __exit locomolcd_exit(void)
+{
+        locomo_driver_unregister(&poodle_lcd_driver);
+}
+
+module_init(locomolcd_init);
+module_exit(locomolcd_exit);
+
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@suse.cz>");
+MODULE_DESCRIPTION("Collie LCD driver");
+MODULE_LICENSE("GPL");