usb: otg: twl4030: Change TWL4030_MODULE_* ids to TWL_MODULE_*

To facilitate upcoming cleanup in twl stack.
No functional changes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 21 insertions, 25 deletions

diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index f0d2e7530cf..11b2a1203d4 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -123,10 +123,10 @@
 #define PHY_CLK_CTRL_STS                0xFF
 #define PHY_DPLL_CLK                    (1 << 0)
 
-/* In module TWL4030_MODULE_PM_MASTER */
+/* In module TWL_MODULE_PM_MASTER */
 #define STS_HW_CONDITIONS               0x0F
 
-/* In module TWL4030_MODULE_PM_RECEIVER */
+/* In module TWL_MODULE_PM_RECEIVER */
 #define VUSB_DEDICATED1                 0x7D
 #define VUSB_DEDICATED2                 0x7E
 #define VUSB1V5_DEV_GRP                 0x71
@@ -195,14 +195,14 @@ static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
 }
 
 #define twl4030_usb_write_verify(twl, address, data)    \
-        twl4030_i2c_write_u8_verify(twl, TWL4030_MODULE_USB, (data), (address))
+        twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address))
 
 static inline int twl4030_usb_write(struct twl4030_usb *twl,
                 u8 address, u8 data)
 {
         int ret = 0;
 
-        ret = twl_i2c_write_u8(TWL4030_MODULE_USB, data, address);
+        ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address);
         if (ret < 0)
                 dev_dbg(twl->dev,
                         "TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
@@ -227,7 +227,7 @@ static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
 
 static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
 {
-        return twl4030_readb(twl, TWL4030_MODULE_USB, address);
+        return twl4030_readb(twl, TWL_MODULE_USB, address);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -264,8 +264,7 @@ static enum omap_musb_vbus_id_status
          * signal is active, the OTG module is activated, and
          * its interrupt may be raised (may wake the system).
          */
-        status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER,
-                        STS_HW_CONDITIONS);
+        status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS);
         if (status < 0)
                 dev_err(twl->dev, "USB link status err %d\n", status);
         else if (status & (BIT(7) | BIT(2))) {
@@ -372,8 +371,7 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
                  * SLEEP. We work around this by clearing the bit after usv3v1
                  * is re-activated. This ensures that VUSB3V1 is really active.
                  */
-                twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
-                                                        VUSB_DEDICATED2);
+                twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
                 regulator_enable(twl->usb1v5);
                 __twl4030_phy_power(twl, 1);
                 twl4030_usb_write(twl, PHY_CLK_CTRL,
@@ -419,50 +417,48 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 {
         /* Enable writing to power configuration registers */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
-                        TWL4030_PM_MASTER_KEY_CFG1,
-                        TWL4030_PM_MASTER_PROTECT_KEY);
+        twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
+                         TWL4030_PM_MASTER_PROTECT_KEY);
 
-        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
-                        TWL4030_PM_MASTER_KEY_CFG2,
-                        TWL4030_PM_MASTER_PROTECT_KEY);
+        twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
+                         TWL4030_PM_MASTER_PROTECT_KEY);
 
         /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
-        /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
+        /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
 
         /* input to VUSB3V1 LDO is from VBAT, not VBUS */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
 
         /* Initialize 3.1V regulator */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
 
         twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
         if (IS_ERR(twl->usb3v1))
                 return -ENODEV;
 
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
 
         /* Initialize 1.5V regulator */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
 
         twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
         if (IS_ERR(twl->usb1v5))
                 goto fail1;
 
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
         /* Initialize 1.8V regulator */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
 
         twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
         if (IS_ERR(twl->usb1v8))
                 goto fail2;
 
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
+        twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
         /* disable access to power configuration registers */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0,
-                        TWL4030_PM_MASTER_PROTECT_KEY);
+        twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
+                         TWL4030_PM_MASTER_PROTECT_KEY);
 
         return 0;