[PATCH] USB Storage: cleanups of sddr09

This is the first of three patches to prepare the sddr09 subdriver for
conversion to the Sim-SCSI framework.  This patch (as594) straightens
out the initialization procedures and headers:

	Some ugly code from usb.c was moved into sddr09.c.

	Set-up of the private data structures was moved into the
	initialization routine.

	The connection between the "dpcm" version and the standalone
	version was clarified.

	A private declaration was moved from a header file into the
	subdriver's .c file.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Andries Brouwer <Andries.Brouwer@cwi.nl>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 55 insertions, 17 deletions

diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 0a6efae452f..6c379b6b43d 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -214,6 +214,20 @@ static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
  * The actual driver starts here.
  */
 
+struct sddr09_card_info {
+        unsigned long   capacity;       /* Size of card in bytes */
+        int             pagesize;       /* Size of page in bytes */
+        int             pageshift;      /* log2 of pagesize */
+        int             blocksize;      /* Size of block in pages */
+        int             blockshift;     /* log2 of blocksize */
+        int             blockmask;      /* 2^blockshift - 1 */
+        int             *lba_to_pba;    /* logical to physical map */
+        int             *pba_to_lba;    /* physical to logical map */
+        int             lbact;          /* number of available pages */
+        int             flags;
+#define SDDR09_WP       1               /* write protected */
+};
+
 /*
  * On my 16MB card, control blocks have size 64 (16 real control bytes,
  * and 48 junk bytes). In reality of course the card uses 16 control bytes,
@@ -1342,27 +1356,51 @@ sddr09_card_info_destructor(void *extra) {
         kfree(info->pba_to_lba);
 }
 
-static void
-sddr09_init_card_info(struct us_data *us) {
-        if (!us->extra) {
-                us->extra = kmalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
-                if (us->extra) {
-                        memset(us->extra, 0, sizeof(struct sddr09_card_info));
-                        us->extra_destructor = sddr09_card_info_destructor;
-                }
+static int
+sddr09_common_init(struct us_data *us) {
+        int result;
+
+        /* set the configuration -- STALL is an acceptable response here */
+        if (us->pusb_dev->actconfig->desc.bConfigurationValue != 1) {
+                US_DEBUGP("active config #%d != 1 ??\n", us->pusb_dev
+                                ->actconfig->desc.bConfigurationValue);
+                return -EINVAL;
+        }
+
+        result = usb_reset_configuration(us->pusb_dev);
+        US_DEBUGP("Result of usb_reset_configuration is %d\n", result);
+        if (result == -EPIPE) {
+                US_DEBUGP("-- stall on control interface\n");
+        } else if (result != 0) {
+                /* it's not a stall, but another error -- time to bail */
+                US_DEBUGP("-- Unknown error.  Rejecting device\n");
+                return -EINVAL;
         }
+
+        us->extra = kzalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
+        if (!us->extra)
+                return -ENOMEM;
+        us->extra_destructor = sddr09_card_info_destructor;
+
+        nand_init_ecc();
+        return 0;
 }
 
+
 /*
  * This is needed at a very early stage. If this is not listed in the
  * unusual devices list but called from here then LUN 0 of the combo reader
  * is not recognized. But I do not know what precisely these calls do.
  */
 int
-sddr09_init(struct us_data *us) {
+usb_stor_sddr09_dpcm_init(struct us_data *us) {
         int result;
         unsigned char *data = us->iobuf;
 
+        result = sddr09_common_init(us);
+        if (result)
+                return result;
+
         result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
         if (result != USB_STOR_TRANSPORT_GOOD) {
                 US_DEBUGP("sddr09_init: send_command fails\n");
@@ -1398,7 +1436,7 @@ sddr09_init(struct us_data *us) {
 
         // test unit ready
 
-        return USB_STOR_TRANSPORT_GOOD;         /* not result */
+        return 0;               /* not result */
 }
 
 /*
@@ -1427,13 +1465,6 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
         };
 
         info = (struct sddr09_card_info *)us->extra;
-        if (!info) {
-                nand_init_ecc();
-                sddr09_init_card_info(us);
-                info = (struct sddr09_card_info *)us->extra;
-                if (!info)
-                        return USB_STOR_TRANSPORT_ERROR;
-        }
 
         if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) {
                 /* for a faked command, we have to follow with a faked sense */
@@ -1606,3 +1637,10 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
         return USB_STOR_TRANSPORT_GOOD;
 }
 
+/*
+ * Initialization routine for the sddr09 subdriver
+ */
+int
+usb_stor_sddr09_init(struct us_data *us) {
+        return sddr09_common_init(us);
+}