Merge branch 'for-usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into work

4 files changed, 215 insertions, 0 deletions

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f9d48..5d963e35049 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
                 u32 __iomem *addr, u32 port_status)
 {
+        /* Don't allow the USB core to disable SuperSpeed ports. */
+        if (xhci->port_array[wIndex] == 0x03) {
+                xhci_dbg(xhci, "Ignoring request to disable "
+                                "SuperSpeed port.\n");
+                return;
+        }
+
         /* Write 1 to disable the port */
         xhci_writel(xhci, port_status | PORT_PE, addr);
         port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d178761c398..0fae58ef8af 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
         xhci->dcbaa = NULL;
 
         scratchpad_free(xhci);
+
+        xhci->num_usb2_ports = 0;
+        xhci->num_usb3_ports = 0;
+        kfree(xhci->usb2_ports);
+        kfree(xhci->usb3_ports);
+        kfree(xhci->port_array);
+
         xhci->page_size = 0;
         xhci->page_shift = 0;
         xhci->bus_suspended = 0;
@@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
                         &xhci->ir_set->erst_dequeue);
 }
 
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+                u32 __iomem *addr, u8 major_revision)
+{
+        u32 temp, port_offset, port_count;
+        int i;
+
+        if (major_revision > 0x03) {
+                xhci_warn(xhci, "Ignoring unknown port speed, "
+                                "Ext Cap %p, revision = 0x%x\n",
+                                addr, major_revision);
+                /* Ignoring port protocol we can't understand. FIXME */
+                return;
+        }
+
+        /* Port offset and count in the third dword, see section 7.2 */
+        temp = xhci_readl(xhci, addr + 2);
+        port_offset = XHCI_EXT_PORT_OFF(temp);
+        port_count = XHCI_EXT_PORT_COUNT(temp);
+        xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+                        "count = %u, revision = 0x%x\n",
+                        addr, port_offset, port_count, major_revision);
+        /* Port count includes the current port offset */
+        if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+                /* WTF? "Valid values are ‘1’ to MaxPorts" */
+                return;
+        port_offset--;
+        for (i = port_offset; i < (port_offset + port_count); i++) {
+                /* Duplicate entry.  Ignore the port if the revisions differ. */
+                if (xhci->port_array[i] != 0) {
+                        xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+                                        " port %u\n", addr, i);
+                        xhci_warn(xhci, "Port was marked as USB %u, "
+                                        "duplicated as USB %u\n",
+                                        xhci->port_array[i], major_revision);
+                        /* Only adjust the roothub port counts if we haven't
+                         * found a similar duplicate.
+                         */
+                        if (xhci->port_array[i] != major_revision &&
+                                xhci->port_array[i] != (u8) -1) {
+                                if (xhci->port_array[i] == 0x03)
+                                        xhci->num_usb3_ports--;
+                                else
+                                        xhci->num_usb2_ports--;
+                                xhci->port_array[i] = (u8) -1;
+                        }
+                        /* FIXME: Should we disable the port? */
+                }
+                xhci->port_array[i] = major_revision;
+                if (major_revision == 0x03)
+                        xhci->num_usb3_ports++;
+                else
+                        xhci->num_usb2_ports++;
+        }
+        /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.  We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+        u32 __iomem *addr;
+        u32 offset;
+        unsigned int num_ports;
+        int i, port_index;
+
+        addr = &xhci->cap_regs->hcc_params;
+        offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+        if (offset == 0) {
+                xhci_err(xhci, "No Extended Capability registers, "
+                                "unable to set up roothub.\n");
+                return -ENODEV;
+        }
+
+        num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+        xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+        if (!xhci->port_array)
+                return -ENOMEM;
+
+        /*
+         * For whatever reason, the first capability offset is from the
+         * capability register base, not from the HCCPARAMS register.
+         * See section 5.3.6 for offset calculation.
+         */
+        addr = &xhci->cap_regs->hc_capbase + offset;
+        while (1) {
+                u32 cap_id;
+
+                cap_id = xhci_readl(xhci, addr);
+                if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+                        xhci_add_in_port(xhci, num_ports, addr,
+                                        (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+                offset = XHCI_EXT_CAPS_NEXT(cap_id);
+                if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+                                == num_ports)
+                        break;
+                /*
+                 * Once you're into the Extended Capabilities, the offset is
+                 * always relative to the register holding the offset.
+                 */
+                addr += offset;
+        }
+
+        if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+                xhci_warn(xhci, "No ports on the roothubs?\n");
+                return -ENODEV;
+        }
+        xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+                        xhci->num_usb2_ports, xhci->num_usb3_ports);
+        /*
+         * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+         * Not sure how the USB core will handle a hub with no ports...
+         */
+        if (xhci->num_usb2_ports) {
+                xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+                                xhci->num_usb2_ports, flags);
+                if (!xhci->usb2_ports)
+                        return -ENOMEM;
+
+                port_index = 0;
+                for (i = 0; i < num_ports; i++)
+                        if (xhci->port_array[i] != 0x03) {
+                                xhci->usb2_ports[port_index] =
+                                        &xhci->op_regs->port_status_base +
+                                        NUM_PORT_REGS*i;
+                                xhci_dbg(xhci, "USB 2.0 port at index %u, "
+                                                "addr = %p\n", i,
+                                                xhci->usb2_ports[port_index]);
+                                port_index++;
+                        }
+        }
+        if (xhci->num_usb3_ports) {
+                xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+                                xhci->num_usb3_ports, flags);
+                if (!xhci->usb3_ports)
+                        return -ENOMEM;
+
+                port_index = 0;
+                for (i = 0; i < num_ports; i++)
+                        if (xhci->port_array[i] == 0x03) {
+                                xhci->usb3_ports[port_index] =
+                                        &xhci->op_regs->port_status_base +
+                                        NUM_PORT_REGS*i;
+                                xhci_dbg(xhci, "USB 3.0 port at index %u, "
+                                                "addr = %p\n", i,
+                                                xhci->usb3_ports[port_index]);
+                                port_index++;
+                        }
+        }
+        return 0;
+}
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
@@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
         if (scratchpad_alloc(xhci, flags))
                 goto fail;
+        if (xhci_setup_port_arrays(xhci, flags))
+                goto fail;
 
         return 0;
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06fca0835b5..45e4a3108cc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1549,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
                 cmd_completion = command->completion;
                 cmd_status = &command->status;
                 command->command_trb = xhci->cmd_ring->enqueue;
+
+                /* Enqueue pointer can be left pointing to the link TRB,
+                 * we must handle that
+                 */
+                if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+                                == TRB_TYPE(TRB_LINK))
+                        command->command_trb =
+                                xhci->cmd_ring->enq_seg->next->trbs;
+
                 list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
         } else {
                 in_ctx = virt_dev->in_ctx;
@@ -2272,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
         /* Attempt to submit the Reset Device command to the command ring */
         spin_lock_irqsave(&xhci->lock, flags);
         reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+        /* Enqueue pointer can be left pointing to the link TRB,
+         * we must handle that
+         */
+        if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+                        == TRB_TYPE(TRB_LINK))
+                reset_device_cmd->command_trb =
+                        xhci->cmd_ring->enq_seg->next->trbs;
+
         list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
         ret = xhci_queue_reset_device(xhci, slot_id);
         if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 85e65647d44..170c367112d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_protocol_caps
+ * @revision:           major revision, minor revision, capability ID,
+ *                      and next capability pointer.
+ * @name_string:        Four ASCII characters to say which spec this xHC
+ *                      follows, typically "USB ".
+ * @port_info:          Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+        u32     revision;
+        u32     name_string;
+        u32     port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x)  (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_OFF(x)    ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x)  (((x) >> 8) & 0xff)
+
+/**
  * struct xhci_container_ctx
  * @type: Type of context.  Used to calculated offsets to contained contexts.
  * @size: Size of the context data
@@ -1240,6 +1258,14 @@ struct xhci_hcd {
         u32                     suspended_ports[8];     /* which ports are
                                                            suspended */
         unsigned long           resume_done[MAX_HC_PORTS];
+        /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+        u8                      *port_array;
+        /* Array of pointers to USB 3.0 PORTSC registers */
+        u32 __iomem             **usb3_ports;
+        unsigned int            num_usb3_ports;
+        /* Array of pointers to USB 2.0 PORTSC registers */
+        u32 __iomem             **usb2_ports;
+        unsigned int            num_usb2_ports;
 };
 
 /* For testing purposes */