pch_uart: Use uartclk instead of base_baud

The term "base baud" refers to the fastest baud rate the device can communicate
at. This is clock/16. pch_uart is using base_baud as the clock itself. Rename
the variables to be semantically correct.

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tomoya MORINAGA <tomoya.rohm@gmail.com>
CC: Feng Tang <feng.tang@intel.com>
CC: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index aa4d07b4a9d..5178213835c 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -206,7 +206,7 @@ enum {
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
-#define DEFAULT_BAUD_RATE 1843200 /* 1.8432MHz */
+#define DEFAULT_UARTCLK 1843200 /* 1.8432MHz */
 
 struct pch_uart_buffer {
         unsigned char *buf;
@@ -221,7 +221,7 @@ struct eg20t_port {
         unsigned int iobase;
         struct pci_dev *pdev;
         int fifo_size;
-        int base_baud;
+        int uartclk;
         int start_tx;
         int start_rx;
         int tx_empty;
@@ -387,7 +387,7 @@ static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
         unsigned int dll, dlm, lcr;
         int div;
 
-        div = DIV_ROUND_CLOSEST(priv->base_baud / 16, baud);
+        div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
         if (div < 0 || USHRT_MAX <= div) {
                 dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
                 return -EINVAL;
@@ -1205,9 +1205,9 @@ static int pch_uart_startup(struct uart_port *port)
         priv->tx_empty = 1;
 
         if (port->uartclk)
-                priv->base_baud = port->uartclk;
+                priv->uartclk = port->uartclk;
         else
-                port->uartclk = priv->base_baud;
+                port->uartclk = priv->uartclk;
 
         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
         ret = pch_uart_hal_set_line(priv, default_baud,
@@ -1557,7 +1557,7 @@ static int __init pch_console_setup(struct console *co, char *options)
                 return -ENODEV;
 
         /* setup uartclock */
-        port->uartclk = DEFAULT_BAUD_RATE;
+        port->uartclk = DEFAULT_UARTCLK;
 
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1600,7 +1600,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
         unsigned int iobase;
         unsigned int mapbase;
         unsigned char *rxbuf;
-        int fifosize, base_baud;
+        int fifosize, uartclk;
         int port_type;
         struct pch_uart_driver_data *board;
         const char *board_name;
@@ -1617,12 +1617,12 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
         if (!rxbuf)
                 goto init_port_free_txbuf;
 
-        base_baud = DEFAULT_BAUD_RATE;
+        uartclk = DEFAULT_UARTCLK;
 
         /* quirk for CM-iTC board */
         board_name = dmi_get_system_info(DMI_BOARD_NAME);
         if (board_name && strstr(board_name, "CM-iTC"))
-                base_baud = 192000000; /* 192.0MHz */
+                uartclk = 192000000; /* 192.0MHz */
 
         switch (port_type) {
         case PORT_UNKNOWN:
@@ -1648,7 +1648,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
         priv->rxbuf.size = PAGE_SIZE;
 
         priv->fifo_size = fifosize;
-        priv->base_baud = base_baud;
+        priv->uartclk = uartclk;
         priv->port_type = PORT_MAX_8250 + port_type + 1;
         priv->port.dev = &pdev->dev;
         priv->port.iobase = iobase;