thermal: make THERMAL_HWMON implementation fully internal

THERMAL_HWMON is implemented inside the thermal_sys driver and has no
effect on drivers implementing thermal zones, so they shouldn't see
anything related to it in <linux/thermal.h>.  Making the THERMAL_HWMON
implementation fully internal has two advantages beyond the cleaner
design:

* This avoids rebuilding all thermal drivers if the THERMAL_HWMON
  implementation changes, or if CONFIG_THERMAL_HWMON gets enabled or
  disabled.

* This avoids breaking the thermal kABI in these cases too, which should
  make distributions happy.

The only drawback I can see is slightly higher memory fragmentation, as
the number of kzalloc() calls will increase by one per thermal zone.  But
I doubt it will be a problem in practice, as I've never seen a system with
more than two thermal zones.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rene Herman <rene.herman@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 92 insertions, 25 deletions

diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index b6353d61fac..708f8e92771 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -420,6 +420,29 @@ thermal_cooling_device_trip_point_show(struct device *dev,
 
 /* hwmon sys I/F */
 #include <linux/hwmon.h>
+
+/* thermal zone devices with the same type share one hwmon device */
+struct thermal_hwmon_device {
+        char type[THERMAL_NAME_LENGTH];
+        struct device *device;
+        int count;
+        struct list_head tz_list;
+        struct list_head node;
+};
+
+struct thermal_hwmon_attr {
+        struct device_attribute attr;
+        char name[16];
+};
+
+/* one temperature input for each thermal zone */
+struct thermal_hwmon_temp {
+        struct list_head hwmon_node;
+        struct thermal_zone_device *tz;
+        struct thermal_hwmon_attr temp_input;   /* hwmon sys attr */
+        struct thermal_hwmon_attr temp_crit;    /* hwmon sys attr */
+};
+
 static LIST_HEAD(thermal_hwmon_list);
 
 static ssize_t
@@ -437,9 +460,10 @@ temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
         int ret;
         struct thermal_hwmon_attr *hwmon_attr
                         = container_of(attr, struct thermal_hwmon_attr, attr);
-        struct thermal_zone_device *tz
-                        = container_of(hwmon_attr, struct thermal_zone_device,
+        struct thermal_hwmon_temp *temp
+                        = container_of(hwmon_attr, struct thermal_hwmon_temp,
                                        temp_input);
+        struct thermal_zone_device *tz = temp->tz;
 
         ret = tz->ops->get_temp(tz, &temperature);
 
@@ -455,9 +479,10 @@ temp_crit_show(struct device *dev, struct device_attribute *attr,
 {
         struct thermal_hwmon_attr *hwmon_attr
                         = container_of(attr, struct thermal_hwmon_attr, attr);
-        struct thermal_zone_device *tz
-                        = container_of(hwmon_attr, struct thermal_zone_device,
+        struct thermal_hwmon_temp *temp
+                        = container_of(hwmon_attr, struct thermal_hwmon_temp,
                                        temp_crit);
+        struct thermal_zone_device *tz = temp->tz;
         long temperature;
         int ret;
 
@@ -485,10 +510,29 @@ thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz)
         return NULL;
 }
 
+/* Find the temperature input matching a given thermal zone */
+static struct thermal_hwmon_temp *
+thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon,
+                          const struct thermal_zone_device *tz)
+{
+        struct thermal_hwmon_temp *temp;
+
+        mutex_lock(&thermal_list_lock);
+        list_for_each_entry(temp, &hwmon->tz_list, hwmon_node)
+                if (temp->tz == tz) {
+                        mutex_unlock(&thermal_list_lock);
+                        return temp;
+                }
+        mutex_unlock(&thermal_list_lock);
+
+        return NULL;
+}
+
 static int
 thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 {
         struct thermal_hwmon_device *hwmon;
+        struct thermal_hwmon_temp *temp;
         int new_hwmon_device = 1;
         int result;
 
@@ -515,30 +559,36 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
                 goto free_mem;
 
  register_sys_interface:
-        tz->hwmon = hwmon;
+        temp = kzalloc(sizeof(struct thermal_hwmon_temp), GFP_KERNEL);
+        if (!temp) {
+                result = -ENOMEM;
+                goto unregister_name;
+        }
+
+        temp->tz = tz;
         hwmon->count++;
 
-        snprintf(tz->temp_input.name, THERMAL_NAME_LENGTH,
+        snprintf(temp->temp_input.name, THERMAL_NAME_LENGTH,
                  "temp%d_input", hwmon->count);
-        tz->temp_input.attr.attr.name = tz->temp_input.name;
-        tz->temp_input.attr.attr.mode = 0444;
-        tz->temp_input.attr.show = temp_input_show;
-        sysfs_attr_init(&tz->temp_input.attr.attr);
-        result = device_create_file(hwmon->device, &tz->temp_input.attr);
+        temp->temp_input.attr.attr.name = temp->temp_input.name;
+        temp->temp_input.attr.attr.mode = 0444;
+        temp->temp_input.attr.show = temp_input_show;
+        sysfs_attr_init(&temp->temp_input.attr.attr);
+        result = device_create_file(hwmon->device, &temp->temp_input.attr);
         if (result)
-                goto unregister_name;
+                goto free_temp_mem;
 
         if (tz->ops->get_crit_temp) {
                 unsigned long temperature;
                 if (!tz->ops->get_crit_temp(tz, &temperature)) {
-                        snprintf(tz->temp_crit.name, THERMAL_NAME_LENGTH,
+                        snprintf(temp->temp_crit.name, THERMAL_NAME_LENGTH,
                                 "temp%d_crit", hwmon->count);
-                        tz->temp_crit.attr.attr.name = tz->temp_crit.name;
-                        tz->temp_crit.attr.attr.mode = 0444;
-                        tz->temp_crit.attr.show = temp_crit_show;
-                        sysfs_attr_init(&tz->temp_crit.attr.attr);
+                        temp->temp_crit.attr.attr.name = temp->temp_crit.name;
+                        temp->temp_crit.attr.attr.mode = 0444;
+                        temp->temp_crit.attr.show = temp_crit_show;
+                        sysfs_attr_init(&temp->temp_crit.attr.attr);
                         result = device_create_file(hwmon->device,
-                                                    &tz->temp_crit.attr);
+                                                    &temp->temp_crit.attr);
                         if (result)
                                 goto unregister_input;
                 }
@@ -547,13 +597,15 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
         mutex_lock(&thermal_list_lock);
         if (new_hwmon_device)
                 list_add_tail(&hwmon->node, &thermal_hwmon_list);
-        list_add_tail(&tz->hwmon_node, &hwmon->tz_list);
+        list_add_tail(&temp->hwmon_node, &hwmon->tz_list);
         mutex_unlock(&thermal_list_lock);
 
         return 0;
 
  unregister_input:
-        device_remove_file(hwmon->device, &tz->temp_input.attr);
+        device_remove_file(hwmon->device, &temp->temp_input.attr);
+ free_temp_mem:
+        kfree(temp);
  unregister_name:
         if (new_hwmon_device) {
                 device_remove_file(hwmon->device, &dev_attr_name);
@@ -569,15 +621,30 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 static void
 thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 {
-        struct thermal_hwmon_device *hwmon = tz->hwmon;
+        struct thermal_hwmon_device *hwmon;
+        struct thermal_hwmon_temp *temp;
+
+        hwmon = thermal_hwmon_lookup_by_type(tz);
+        if (unlikely(!hwmon)) {
+                /* Should never happen... */
+                dev_dbg(&tz->device, "hwmon device lookup failed!\n");
+                return;
+        }
+
+        temp = thermal_hwmon_lookup_temp(hwmon, tz);
+        if (unlikely(!temp)) {
+                /* Should never happen... */
+                dev_dbg(&tz->device, "temperature input lookup failed!\n");
+                return;
+        }
 
-        tz->hwmon = NULL;
-        device_remove_file(hwmon->device, &tz->temp_input.attr);
+        device_remove_file(hwmon->device, &temp->temp_input.attr);
         if (tz->ops->get_crit_temp)
-                device_remove_file(hwmon->device, &tz->temp_crit.attr);
+                device_remove_file(hwmon->device, &temp->temp_crit.attr);
 
         mutex_lock(&thermal_list_lock);
-        list_del(&tz->hwmon_node);
+        list_del(&temp->hwmon_node);
+        kfree(temp);
         if (!list_empty(&hwmon->tz_list)) {
                 mutex_unlock(&thermal_list_lock);
                 return;