[SCSI] megaraid: fix kernel-doc

kernel-doc modifications:
- change "@param var" notation to @var;
- change function/description separator from ':' to '-';
- change var/description separator from '-' to ':';
- fix a few doc. typos;
- don't use kernel-doc /** lead-in when the doc. block is not kernel-doc;
- use Linux common */ ending comment format instead of **/;
- use correct function parameter names;
- place function parameters immediately after the function short description;
- place kernel-doc immediately before its function or macro;

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Sumant Patro <sumantp@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 140 insertions, 145 deletions

diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 49ee50cc4e8..04d0b6918c6 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -147,7 +147,7 @@ MODULE_VERSION(MEGARAID_VERSION);
  * ### modules parameters for driver ###
  */
 
-/**
+/*
  * Set to enable driver to expose unconfigured disk to kernel
  */
 static int megaraid_expose_unconf_disks = 0;
@@ -155,7 +155,7 @@ module_param_named(unconf_disks, megaraid_expose_unconf_disks, int, 0);
 MODULE_PARM_DESC(unconf_disks,
         "Set to expose unconfigured disks to kernel (default=0)");
 
-/**
+/*
  * driver wait time if the adapter's mailbox is busy
  */
 static unsigned int max_mbox_busy_wait = MBOX_BUSY_WAIT;
@@ -163,7 +163,7 @@ module_param_named(busy_wait, max_mbox_busy_wait, int, 0);
 MODULE_PARM_DESC(busy_wait,
         "Max wait for mailbox in microseconds if busy (default=10)");
 
-/**
+/*
  * number of sectors per IO command
  */
 static unsigned int megaraid_max_sectors = MBOX_MAX_SECTORS;
@@ -171,7 +171,7 @@ module_param_named(max_sectors, megaraid_max_sectors, int, 0);
 MODULE_PARM_DESC(max_sectors,
         "Maximum number of sectors per IO command (default=128)");
 
-/**
+/*
  * number of commands per logical unit
  */
 static unsigned int megaraid_cmd_per_lun = MBOX_DEF_CMD_PER_LUN;
@@ -180,7 +180,7 @@ MODULE_PARM_DESC(cmd_per_lun,
         "Maximum number of commands per logical unit (default=64)");
 
 
-/**
+/*
  * Fast driver load option, skip scanning for physical devices during load.
  * This would result in non-disk devices being skipped during driver load
  * time. These can be later added though, using /proc/scsi/scsi
@@ -191,7 +191,7 @@ MODULE_PARM_DESC(fast_load,
         "Faster loading of the driver, skips physical devices! (default=0)");
 
 
-/**
+/*
  * mraid_debug level - threshold for amount of information to be displayed by
  * the driver. This level can be changed through modules parameters, ioctl or
  * sysfs/proc interface. By default, print the announcement messages only.
@@ -338,7 +338,7 @@ static struct device_attribute *megaraid_sdev_attrs[] = {
  *
  * Return value:
  *      actual depth set
- **/
+ */
 static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth)
 {
         if (qdepth > MBOX_MAX_SCSI_CMDS)
@@ -370,8 +370,8 @@ static struct scsi_host_template megaraid_template_g = {
  * megaraid_init - module load hook
  *
  * We register ourselves as hotplug enabled module and let PCI subsystem
- * discover our adaters
- **/
+ * discover our adapters.
+ */
 static int __init
 megaraid_init(void)
 {
@@ -406,7 +406,7 @@ megaraid_init(void)
 /**
  * megaraid_exit - driver unload entry point
  *
- * We simply unwrap the megaraid_init routine here
+ * We simply unwrap the megaraid_init routine here.
  */
 static void __exit
 megaraid_exit(void)
@@ -422,12 +422,12 @@ megaraid_exit(void)
 
 /**
  * megaraid_probe_one - PCI hotplug entry point
- * @param pdev  : handle to this controller's PCI configuration space
- * @param id    : pci device id of the class of controllers
+ * @pdev        : handle to this controller's PCI configuration space
+ * @id          : pci device id of the class of controllers
  *
  * This routine should be called whenever a new adapter is detected by the
  * PCI hotplug susbsytem.
- **/
+ */
 static int __devinit
 megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -543,16 +543,15 @@ out_probe_one:
 
 
 /**
- * megaraid_detach_one - release the framework resources and call LLD release
- * routine
- * @param pdev  : handle for our PCI cofiguration space
+ * megaraid_detach_one - release framework resources and call LLD release routine
+ * @pdev        : handle for our PCI cofiguration space
  *
  * This routine is called during driver unload. We free all the allocated
  * resources and call the corresponding LLD so that it can also release all
  * its resources.
  *
- * This routine is also called from the PCI hotplug system
- **/
+ * This routine is also called from the PCI hotplug system.
+ */
 static void
 megaraid_detach_one(struct pci_dev *pdev)
 {
@@ -616,9 +615,9 @@ megaraid_detach_one(struct pci_dev *pdev)
 
 /**
  * megaraid_mbox_shutdown - PCI shutdown for megaraid HBA
- * @param device        : generice driver model device
+ * @pdev                : generic driver model device
  *
- * Shutdown notification, perform flush cache
+ * Shutdown notification, perform flush cache.
  */
 static void
 megaraid_mbox_shutdown(struct pci_dev *pdev)
@@ -644,10 +643,10 @@ megaraid_mbox_shutdown(struct pci_dev *pdev)
 
 /**
  * megaraid_io_attach - attach a device with the IO subsystem
- * @param adapter       : controller's soft state
+ * @adapter             : controller's soft state
  *
- * Attach this device with the IO subsystem
- **/
+ * Attach this device with the IO subsystem.
+ */
 static int
 megaraid_io_attach(adapter_t *adapter)
 {
@@ -696,10 +695,10 @@ megaraid_io_attach(adapter_t *adapter)
 
 /**
  * megaraid_io_detach - detach a device from the IO subsystem
- * @param adapter       : controller's soft state
+ * @adapter             : controller's soft state
  *
- * Detach this device from the IO subsystem
- **/
+ * Detach this device from the IO subsystem.
+ */
 static void
 megaraid_io_detach(adapter_t *adapter)
 {
@@ -723,13 +722,13 @@ megaraid_io_detach(adapter_t *adapter)
 
 /**
  * megaraid_init_mbox - initialize controller
- * @param adapter       - our soft state
+ * @adapter             : our soft state
  *
- * . Allocate 16-byte aligned mailbox memory for firmware handshake
- * . Allocate controller's memory resources
- * . Find out all initialization data
- * . Allocate memory required for all the commands
- * . Use internal library of FW routines, build up complete soft state
+ * - Allocate 16-byte aligned mailbox memory for firmware handshake
+ * - Allocate controller's memory resources
+ * - Find out all initialization data
+ * - Allocate memory required for all the commands
+ * - Use internal library of FW routines, build up complete soft state
  */
 static int __devinit
 megaraid_init_mbox(adapter_t *adapter)
@@ -943,7 +942,7 @@ out_free_raid_dev:
 
 /**
  * megaraid_fini_mbox - undo controller initialization
- * @param adapter       : our soft state
+ * @adapter             : our soft state
  */
 static void
 megaraid_fini_mbox(adapter_t *adapter)
@@ -973,12 +972,12 @@ megaraid_fini_mbox(adapter_t *adapter)
 
 /**
  * megaraid_alloc_cmd_packets - allocate shared mailbox
- * @param adapter       : soft state of the raid controller
+ * @adapter             : soft state of the raid controller
  *
  * Allocate and align the shared mailbox. This maibox is used to issue
  * all the commands. For IO based controllers, the mailbox is also regsitered
  * with the FW. Allocate memory for all commands as well.
- * This is our big allocator
+ * This is our big allocator.
  */
 static int
 megaraid_alloc_cmd_packets(adapter_t *adapter)
@@ -1138,9 +1137,9 @@ out_free_common_mbox:
 
 /**
  * megaraid_free_cmd_packets - free memory
- * @param adapter       : soft state of the raid controller
+ * @adapter             : soft state of the raid controller
  *
- * Release memory resources allocated for commands
+ * Release memory resources allocated for commands.
  */
 static void
 megaraid_free_cmd_packets(adapter_t *adapter)
@@ -1162,10 +1161,10 @@ megaraid_free_cmd_packets(adapter_t *adapter)
 
 /**
  * megaraid_mbox_setup_dma_pools - setup dma pool for command packets
- * @param adapter       : HBA soft state
+ * @adapter             : HBA soft state
  *
- * setup the dma pools for mailbox, passthru and extended passthru structures,
- * and scatter-gather lists
+ * Setup the dma pools for mailbox, passthru and extended passthru structures,
+ * and scatter-gather lists.
  */
 static int
 megaraid_mbox_setup_dma_pools(adapter_t *adapter)
@@ -1258,10 +1257,10 @@ fail_setup_dma_pool:
 
 /**
  * megaraid_mbox_teardown_dma_pools - teardown dma pools for command packets
- * @param adapter       : HBA soft state
+ * @adapter             : HBA soft state
  *
- * teardown the dma pool for mailbox, passthru and extended passthru
- * structures, and scatter-gather lists
+ * Teardown the dma pool for mailbox, passthru and extended passthru
+ * structures, and scatter-gather lists.
  */
 static void
 megaraid_mbox_teardown_dma_pools(adapter_t *adapter)
@@ -1306,10 +1305,11 @@ megaraid_mbox_teardown_dma_pools(adapter_t *adapter)
 /**
  * megaraid_alloc_scb - detach and return a scb from the free list
  * @adapter     : controller's soft state
+ * @scp         : pointer to the scsi command to be executed
  *
- * return the scb from the head of the free list. NULL if there are none
- * available
- **/
+ * Return the scb from the head of the free list. %NULL if there are none
+ * available.
+ */
 static scb_t *
 megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp)
 {
@@ -1343,11 +1343,11 @@ megaraid_alloc_scb(adapter_t *adapter, struct scsi_cmnd *scp)
  * @adapter     : controller's soft state
  * @scb         : scb to be freed
  *
- * return the scb back to the free list of scbs. The caller must 'flush' the
+ * Return the scb back to the free list of scbs. The caller must 'flush' the
  * SCB before calling us. E.g., performing pci_unamp and/or pci_sync etc.
  * NOTE NOTE: Make sure the scb is not on any list before calling this
  * routine.
- **/
+ */
 static inline void
 megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb)
 {
@@ -1368,10 +1368,10 @@ megaraid_dealloc_scb(adapter_t *adapter, scb_t *scb)
 
 /**
  * megaraid_mbox_mksgl - make the scatter-gather list
- * @adapter     - controller's soft state
- * @scb         - scsi control block
+ * @adapter     : controller's soft state
+ * @scb         : scsi control block
  *
- * prepare the scatter-gather list
+ * Prepare the scatter-gather list.
  */
 static int
 megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb)
@@ -1441,10 +1441,10 @@ megaraid_mbox_mksgl(adapter_t *adapter, scb_t *scb)
 
 /**
  * mbox_post_cmd - issue a mailbox command
- * @adapter     - controller's soft state
- * @scb         - command to be issued
+ * @adapter     : controller's soft state
+ * @scb         : command to be issued
  *
- * post the command to the controller if mailbox is availble.
+ * Post the command to the controller if mailbox is available.
  */
 static int
 mbox_post_cmd(adapter_t *adapter, scb_t *scb)
@@ -1524,7 +1524,7 @@ mbox_post_cmd(adapter_t *adapter, scb_t *scb)
  * Queue entry point for mailbox based controllers.
  */
 static int
-megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *))
+megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 {
         adapter_t       *adapter;
         scb_t           *scb;
@@ -1554,15 +1554,15 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (* done)(struct scsi_cmnd *))
 }
 
 /**
- * megaraid_mbox_build_cmd - transform the mid-layer scsi command to megaraid
- * firmware lingua
- * @adapter     - controller's soft state
- * @scp         - mid-layer scsi command pointer
- * @busy        - set if request could not be completed because of lack of
+ * megaraid_mbox_build_cmd - transform the mid-layer scsi commands
+ * @adapter     : controller's soft state
+ * @scp         : mid-layer scsi command pointer
+ * @busy        : set if request could not be completed because of lack of
  *              resources
  *
- * convert the command issued by mid-layer to format understood by megaraid
- * firmware. We also complete certain command without sending them to firmware
+ * Transform the mid-layer scsi command to megaraid firmware lingua.
+ * Convert the command issued by mid-layer to format understood by megaraid
+ * firmware. We also complete certain commands without sending them to firmware.
  */
 static scb_t *
 megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
@@ -1943,9 +1943,9 @@ megaraid_mbox_build_cmd(adapter_t *adapter, struct scsi_cmnd *scp, int *busy)
 /**
  * megaraid_mbox_runpendq - execute commands queued in the pending queue
  * @adapter     : controller's soft state
- * @scb         : SCB to be queued in the pending list
+ * @scb_q       : SCB to be queued in the pending list
  *
- * scan the pending list for commands which are not yet issued and try to
+ * Scan the pending list for commands which are not yet issued and try to
  * post to the controller. The SCB can be a null pointer, which would indicate
  * no SCB to be queue, just try to execute the ones in the pending list.
  *
@@ -2018,11 +2018,11 @@ megaraid_mbox_runpendq(adapter_t *adapter, scb_t *scb_q)
 
 /**
  * megaraid_mbox_prepare_pthru - prepare a command for physical devices
- * @adapter     - pointer to controller's soft state
- * @scb         - scsi control block
- * @scp         - scsi command from the mid-layer
+ * @adapter     : pointer to controller's soft state
+ * @scb         : scsi control block
+ * @scp         : scsi command from the mid-layer
  *
- * prepare a command for the scsi physical devices
+ * Prepare a command for the scsi physical devices.
  */
 static void
 megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb,
@@ -2066,12 +2066,12 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb,
 
 /**
  * megaraid_mbox_prepare_epthru - prepare a command for physical devices
- * @adapter     - pointer to controller's soft state
- * @scb         - scsi control block
- * @scp         - scsi command from the mid-layer
+ * @adapter     : pointer to controller's soft state
+ * @scb         : scsi control block
+ * @scp         : scsi command from the mid-layer
  *
- * prepare a command for the scsi physical devices. This rountine prepares
- * commands for devices which can take extended CDBs (>10 bytes)
+ * Prepare a command for the scsi physical devices. This rountine prepares
+ * commands for devices which can take extended CDBs (>10 bytes).
  */
 static void
 megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb,
@@ -2115,9 +2115,9 @@ megaraid_mbox_prepare_epthru(adapter_t *adapter, scb_t *scb,
 
 /**
  * megaraid_ack_sequence - interrupt ack sequence for memory mapped HBAs
- * @adapter     - controller's soft state
+ * @adapter     : controller's soft state
  *
- * Interrupt ackrowledgement sequence for memory mapped HBAs. Find out the
+ * Interrupt acknowledgement sequence for memory mapped HBAs. Find out the
  * completed command and put them on the completed list for later processing.
  *
  * Returns:     1 if the interrupt is valid, 0 otherwise
@@ -2230,9 +2230,8 @@ megaraid_ack_sequence(adapter_t *adapter)
 
 /**
  * megaraid_isr - isr for memory based mailbox based controllers
- * @irq         - irq
- * @devp        - pointer to our soft state
- * @regs        - unused
+ * @irq         : irq
+ * @devp        : pointer to our soft state
  *
  * Interrupt service routine for memory-mapped mailbox controllers.
  */
@@ -2677,7 +2676,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp)
  * the FW is still live, in which case the outstanding commands counter mut go
  * down to 0. If that happens, also issue the reservation reset command to
  * relinquish (possible) reservations on the logical drives connected to this
- * host
+ * host.
  **/
 static int
 megaraid_reset_handler(struct scsi_cmnd *scp)
@@ -2829,11 +2828,11 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 
 /**
  * mbox_post_sync_cmd() - blocking command to the mailbox based controllers
- * @adapter     - controller's soft state
- * @raw_mbox    - the mailbox
+ * @adapter     : controller's soft state
+ * @raw_mbox    : the mailbox
  *
  * Issue a scb in synchronous and non-interrupt mode for mailbox based
- * controllers
+ * controllers.
  */
 static int
 mbox_post_sync_cmd(adapter_t *adapter, uint8_t raw_mbox[])
@@ -2961,12 +2960,12 @@ blocked_mailbox:
 
 /**
  * mbox_post_sync_cmd_fast - blocking command to the mailbox based controllers
- * @adapter     - controller's soft state
- * @raw_mbox    - the mailbox
+ * @adapter     : controller's soft state
+ * @raw_mbox    : the mailbox
  *
  * Issue a scb in synchronous and non-interrupt mode for mailbox based
  * controllers. This is a faster version of the synchronous command and
- * therefore can be called in interrupt-context as well
+ * therefore can be called in interrupt-context as well.
  */
 static int
 mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
@@ -3014,10 +3013,10 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
 
 /**
  * megaraid_busywait_mbox() - Wait until the controller's mailbox is available
- * @raid_dev    - RAID device (HBA) soft state
+ * @raid_dev    : RAID device (HBA) soft state
  *
- * wait until the controller's mailbox is available to accept more commands.
- * wait for at most 1 second
+ * Wait until the controller's mailbox is available to accept more commands.
+ * Wait for at most 1 second.
  */
 static int
 megaraid_busywait_mbox(mraid_device_t *raid_dev)
@@ -3038,9 +3037,9 @@ megaraid_busywait_mbox(mraid_device_t *raid_dev)
 
 /**
  * megaraid_mbox_product_info - some static information about the controller
- * @adapter     - our soft state
+ * @adapter     : our soft state
  *
- * issue commands to the controller to grab some parameters required by our
+ * Issue commands to the controller to grab some parameters required by our
  * caller.
  */
 static int
@@ -3163,10 +3162,10 @@ megaraid_mbox_product_info(adapter_t *adapter)
 
 /**
  * megaraid_mbox_extended_cdb - check for support for extended CDBs
- * @adapter     - soft state for the controller
+ * @adapter     : soft state for the controller
  *
- * this routine check whether the controller in question supports extended
- * ( > 10 bytes ) CDBs
+ * This routine check whether the controller in question supports extended
+ * ( > 10 bytes ) CDBs.
  */
 static int
 megaraid_mbox_extended_cdb(adapter_t *adapter)
@@ -3199,8 +3198,8 @@ megaraid_mbox_extended_cdb(adapter_t *adapter)
 
 /**
  * megaraid_mbox_support_ha - Do we support clustering
- * @adapter     - soft state for the controller
- * @init_id     - ID of the initiator
+ * @adapter     : soft state for the controller
+ * @init_id     : ID of the initiator
  *
  * Determine if the firmware supports clustering and the ID of the initiator.
  */
@@ -3242,9 +3241,9 @@ megaraid_mbox_support_ha(adapter_t *adapter, uint16_t *init_id)
 
 /**
  * megaraid_mbox_support_random_del - Do we support random deletion
- * @adapter     - soft state for the controller
+ * @adapter     : soft state for the controller
  *
- * Determine if the firmware supports random deletion
+ * Determine if the firmware supports random deletion.
  * Return:      1 is operation supported, 0 otherwise
  */
 static int
@@ -3277,10 +3276,10 @@ megaraid_mbox_support_random_del(adapter_t *adapter)
 
 /**
  * megaraid_mbox_get_max_sg - maximum sg elements supported by the firmware
- * @adapter     - soft state for the controller
+ * @adapter     : soft state for the controller
  *
  * Find out the maximum number of scatter-gather elements supported by the
- * firmware
+ * firmware.
  */
 static int
 megaraid_mbox_get_max_sg(adapter_t *adapter)
@@ -3317,10 +3316,10 @@ megaraid_mbox_get_max_sg(adapter_t *adapter)
 
 /**
  * megaraid_mbox_enum_raid_scsi - enumerate the RAID and SCSI channels
- * @adapter     - soft state for the controller
+ * @adapter     : soft state for the controller
  *
- * Enumerate the RAID and SCSI channels for ROMB platoforms so that channels
- * can be exported as regular SCSI channels
+ * Enumerate the RAID and SCSI channels for ROMB platforms so that channels
+ * can be exported as regular SCSI channels.
  */
 static void
 megaraid_mbox_enum_raid_scsi(adapter_t *adapter)
@@ -3354,9 +3353,9 @@ megaraid_mbox_enum_raid_scsi(adapter_t *adapter)
 
 /**
  * megaraid_mbox_flush_cache - flush adapter and disks cache
- * @param adapter       : soft state for the controller
+ * @adapter             : soft state for the controller
  *
- * Flush adapter cache followed by disks cache
+ * Flush adapter cache followed by disks cache.
  */
 static void
 megaraid_mbox_flush_cache(adapter_t *adapter)
@@ -3387,9 +3386,9 @@ megaraid_mbox_flush_cache(adapter_t *adapter)
 
 /**
  * megaraid_mbox_fire_sync_cmd - fire the sync cmd
- * @param adapter       : soft state for the controller
+ * @adapter             : soft state for the controller
  *
- * Clears the pending cmds in FW and reinits its RAID structs
+ * Clears the pending cmds in FW and reinits its RAID structs.
  */
 static int
 megaraid_mbox_fire_sync_cmd(adapter_t *adapter)
@@ -3465,12 +3464,12 @@ blocked_mailbox:
 
 /**
  * megaraid_mbox_display_scb - display SCB information, mostly debug purposes
- * @param adapter       : controllers' soft state
- * @param scb           : SCB to be displayed
- * @param level : debug level for console print
+ * @adapter             : controller's soft state
+ * @scb                 : SCB to be displayed
+ * @level               : debug level for console print
  *
  * Diplay information about the given SCB iff the current debug level is
- * verbose
+ * verbose.
  */
 static void
 megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
@@ -3518,7 +3517,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
  * scsi addresses and megaraid scsi and logical drive addresses. We export
  * scsi devices on their actual addresses, whereas the logical drives are
  * exported on a virtual scsi channel.
- **/
+ */
 static void
 megaraid_mbox_setup_device_map(adapter_t *adapter)
 {
@@ -3556,7 +3555,7 @@ megaraid_mbox_setup_device_map(adapter_t *adapter)
 
 /**
  * megaraid_cmm_register - register with the mangement module
- * @param adapter       : HBA soft state
+ * @adapter             : HBA soft state
  *
  * Register with the management module, which allows applications to issue
  * ioctl calls to the drivers. This interface is used by the management module
@@ -3646,11 +3645,11 @@ megaraid_cmm_register(adapter_t *adapter)
 
 /**
  * megaraid_cmm_unregister - un-register with the mangement module
- * @param adapter       : HBA soft state
+ * @adapter             : HBA soft state
  *
  * Un-register with the management module.
  * FIXME: mgmt module must return failure for unregister if it has pending
- * commands in LLD
+ * commands in LLD.
  */
 static int
 megaraid_cmm_unregister(adapter_t *adapter)
@@ -3663,9 +3662,9 @@ megaraid_cmm_unregister(adapter_t *adapter)
 
 /**
  * megaraid_mbox_mm_handler - interface for CMM to issue commands to LLD
- * @param drvr_data     : LLD specific data
- * @param kioc          : CMM interface packet
- * @param action        : command action
+ * @drvr_data           : LLD specific data
+ * @kioc                : CMM interface packet
+ * @action              : command action
  *
  * This routine is invoked whenever the Common Mangement Module (CMM) has a
  * command for us. The 'action' parameter specifies if this is a new command
@@ -3718,8 +3717,8 @@ megaraid_mbox_mm_handler(unsigned long drvr_data, uioc_t *kioc, uint32_t action)
 
 /**
  * megaraid_mbox_mm_command - issues commands routed through CMM
- * @param adapter       : HBA soft state
- * @param kioc          : management command packet
+ * @adapter             : HBA soft state
+ * @kioc                : management command packet
  *
  * Issues commands, which are routed through the management module.
  */
@@ -3888,8 +3887,8 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
 
 /**
  * gather_hbainfo - HBA characteristics for the applications
- * @param adapter       : HBA soft state
- * @param hinfo         : pointer to the caller's host info strucuture
+ * @adapter             : HBA soft state
+ * @hinfo               : pointer to the caller's host info strucuture
  */
 static int
 gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo)
@@ -3923,16 +3922,15 @@ gather_hbainfo(adapter_t *adapter, mraid_hba_info_t *hinfo)
 
 /**
  * megaraid_sysfs_alloc_resources - allocate sysfs related resources
+ * @adapter     : controller's soft state
  *
  * Allocate packets required to issue FW calls whenever the sysfs attributes
  * are read. These attributes would require up-to-date information from the
  * FW. Also set up resources for mutual exclusion to share these resources and
  * the wait queue.
  *
- * @param adapter : controller's soft state
- *
- * @return 0 on success
- * @return -ERROR_CODE on failure
+ * Return 0 on success.
+ * Return -ERROR_CODE on failure.
  */
 static int
 megaraid_sysfs_alloc_resources(adapter_t *adapter)
@@ -3969,10 +3967,9 @@ megaraid_sysfs_alloc_resources(adapter_t *adapter)
 
 /**
  * megaraid_sysfs_free_resources - free sysfs related resources
+ * @adapter     : controller's soft state
  *
  * Free packets allocated for sysfs FW commands
- *
- * @param adapter : controller's soft state
  */
 static void
 megaraid_sysfs_free_resources(adapter_t *adapter)
@@ -3991,10 +3988,9 @@ megaraid_sysfs_free_resources(adapter_t *adapter)
 
 /**
  * megaraid_sysfs_get_ldmap_done - callback for get ldmap
+ * @uioc        : completed packet
  *
  * Callback routine called in the ISR/tasklet context for get ldmap call
- *
- * @param uioc : completed packet
  */
 static void
 megaraid_sysfs_get_ldmap_done(uioc_t *uioc)
@@ -4010,12 +4006,11 @@ megaraid_sysfs_get_ldmap_done(uioc_t *uioc)
 
 /**
  * megaraid_sysfs_get_ldmap_timeout - timeout handling for get ldmap
+ * @data        : timed out packet
  *
  * Timeout routine to recover and return to application, in case the adapter
- * has stopped responding. A timeout of 60 seconds for this command seem like
- * a good value
- *
- * @param uioc : timed out packet
+ * has stopped responding. A timeout of 60 seconds for this command seems like
+ * a good value.
  */
 static void
 megaraid_sysfs_get_ldmap_timeout(unsigned long data)
@@ -4032,6 +4027,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data)
 
 /**
  * megaraid_sysfs_get_ldmap - get update logical drive map
+ * @adapter     : controller's soft state
  *
  * This routine will be called whenever user reads the logical drive
  * attributes, go get the current logical drive mapping table from the
@@ -4043,10 +4039,8 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data)
  * standalone libary. For now, this should suffice since there is no other
  * user of this interface.
  *
- * @param adapter : controller's soft state
- *
- * @return 0 on success
- * @return -1 on failure
+ * Return 0 on success.
+ * Return -1 on failure.
  */
 static int
 megaraid_sysfs_get_ldmap(adapter_t *adapter)
@@ -4148,13 +4142,12 @@ megaraid_sysfs_get_ldmap(adapter_t *adapter)
 
 /**
  * megaraid_sysfs_show_app_hndl - display application handle for this adapter
+ * @cdev        : class device object representation for the host
+ * @buf         : buffer to send data to
  *
  * Display the handle used by the applications while executing management
  * tasks on the adapter. We invoke a management module API to get the adapter
  * handle, since we do not interface with applications directly.
- *
- * @param cdev  : class device object representation for the host
- * @param buf   : buffer to send data to
  */
 static ssize_t
 megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf)
@@ -4171,16 +4164,18 @@ megaraid_sysfs_show_app_hndl(struct class_device *cdev, char *buf)
 
 /**
  * megaraid_sysfs_show_ldnum - display the logical drive number for this device
+ * @dev         : device object representation for the scsi device
+ * @attr        : device attribute to show
+ * @buf         : buffer to send data to
  *
  * Display the logical drive number for the device in question, if it a valid
- * logical drive. For physical devices, "-1" is returned
- * The logical drive number is displayed in following format
+ * logical drive. For physical devices, "-1" is returned.
+ *
+ * The logical drive number is displayed in following format:
  *
  * <SCSI ID> <LD NUM> <LD STICKY ID> <APP ADAPTER HANDLE>
- *   <int>     <int>       <int>            <int>
  *
- * @param dev   : device object representation for the scsi device
- * @param buf   : buffer to send data to
+ *   <int>     <int>       <int>            <int>
  */
 static ssize_t
 megaraid_sysfs_show_ldnum(struct device *dev, struct device_attribute *attr, char *buf)