rt2x00: Implement HW encryption (rt61pci)

rt61pci supports hardware encryption.
rt61pci supports up to 4 shared keys and up to 64 pairwise keys.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

3 files changed, 270 insertions, 8 deletions

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 2f60e175f03..f333f6100d0 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -107,6 +107,7 @@ config RT61PCI
         depends on PCI
         select RT2X00_LIB_PCI
         select RT2X00_LIB_FIRMWARE
+        select RT2X00_LIB_CRYPTO
         select CRC_ITU_T
         select EEPROM_93CX6
         ---help---
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 087e90b328c..86e7a50374b 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -346,6 +346,204 @@ static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev,
 /*
  * Configuration handlers.
  */
+static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
+                                     struct rt2x00lib_crypto *crypto,
+                                     struct ieee80211_key_conf *key)
+{
+        struct hw_key_entry key_entry;
+        struct rt2x00_field32 field;
+        u32 mask;
+        u32 reg;
+
+        if (crypto->cmd == SET_KEY) {
+                /*
+                 * rt2x00lib can't determine the correct free
+                 * key_idx for shared keys. We have 1 register
+                 * with key valid bits. The goal is simple, read
+                 * the register, if that is full we have no slots
+                 * left.
+                 * Note that each BSS is allowed to have up to 4
+                 * shared keys, so put a mask over the allowed
+                 * entries.
+                 */
+                mask = (0xf << crypto->bssidx);
+
+                rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
+                reg &= mask;
+
+                if (reg && reg == mask)
+                        return -ENOSPC;
+
+                key->hw_key_idx += reg ? (ffz(reg) - 1) : 0;
+
+                /*
+                 * Upload key to hardware
+                 */
+                memcpy(key_entry.key, crypto->key,
+                       sizeof(key_entry.key));
+                memcpy(key_entry.tx_mic, crypto->tx_mic,
+                       sizeof(key_entry.tx_mic));
+                memcpy(key_entry.rx_mic, crypto->rx_mic,
+                       sizeof(key_entry.rx_mic));
+
+                reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+                rt2x00pci_register_multiwrite(rt2x00dev, reg,
+                                              &key_entry, sizeof(key_entry));
+
+                /*
+                 * The cipher types are stored over 2 registers.
+                 * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+                 * bssidx 1 and 2 keys are stored in SEC_CSR5.
+                 * Using the correct defines correctly will cause overhead,
+                 * so just calculate the correct offset.
+                 */
+                if (key->hw_key_idx < 8) {
+                        field.bit_offset = (3 * key->hw_key_idx);
+                        field.bit_mask = 0x7 << field.bit_offset;
+
+                        rt2x00pci_register_read(rt2x00dev, SEC_CSR1, &reg);
+                        rt2x00_set_field32(&reg, field, crypto->cipher);
+                        rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg);
+                } else {
+                        field.bit_offset = (3 * (key->hw_key_idx - 8));
+                        field.bit_mask = 0x7 << field.bit_offset;
+
+                        rt2x00pci_register_read(rt2x00dev, SEC_CSR5, &reg);
+                        rt2x00_set_field32(&reg, field, crypto->cipher);
+                        rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg);
+                }
+
+                /*
+                 * The driver does not support the IV/EIV generation
+                 * in hardware. However it doesn't support the IV/EIV
+                 * inside the ieee80211 frame either, but requires it
+                 * to be provided seperately for the descriptor.
+                 * rt2x00lib will cut the IV/EIV data out of all frames
+                 * given to us by mac80211, but we must tell mac80211
+                 * to generate the IV/EIV data.
+                 */
+                key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+        }
+
+        /*
+         * SEC_CSR0 contains only single-bit fields to indicate
+         * a particular key is valid. Because using the FIELD32()
+         * defines directly will cause a lot of overhead we use
+         * a calculation to determine the correct bit directly.
+         */
+        mask = 1 << key->hw_key_idx;
+
+        rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
+        if (crypto->cmd == SET_KEY)
+                reg |= mask;
+        else if (crypto->cmd == DISABLE_KEY)
+                reg &= ~mask;
+        rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg);
+
+        return 0;
+}
+
+static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+                                       struct rt2x00lib_crypto *crypto,
+                                       struct ieee80211_key_conf *key)
+{
+        struct hw_pairwise_ta_entry addr_entry;
+        struct hw_key_entry key_entry;
+        u32 mask;
+        u32 reg;
+
+        if (crypto->cmd == SET_KEY) {
+                /*
+                 * rt2x00lib can't determine the correct free
+                 * key_idx for pairwise keys. We have 2 registers
+                 * with key valid bits. The goal is simple, read
+                 * the first register, if that is full move to
+                 * the next register.
+                 * When both registers are full, we drop the key,
+                 * otherwise we use the first invalid entry.
+                 */
+                rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
+                if (reg && reg == ~0) {
+                        key->hw_key_idx = 32;
+                        rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
+                        if (reg && reg == ~0)
+                                return -ENOSPC;
+                }
+
+                key->hw_key_idx += reg ? (ffz(reg) - 1) : 0;
+
+                /*
+                 * Upload key to hardware
+                 */
+                memcpy(key_entry.key, crypto->key,
+                       sizeof(key_entry.key));
+                memcpy(key_entry.tx_mic, crypto->tx_mic,
+                       sizeof(key_entry.tx_mic));
+                memcpy(key_entry.rx_mic, crypto->rx_mic,
+                       sizeof(key_entry.rx_mic));
+
+                memset(&addr_entry, 0, sizeof(addr_entry));
+                memcpy(&addr_entry, crypto->address, ETH_ALEN);
+                addr_entry.cipher = crypto->cipher;
+
+                reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+                rt2x00pci_register_multiwrite(rt2x00dev, reg,
+                                              &key_entry, sizeof(key_entry));
+
+                reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+                rt2x00pci_register_multiwrite(rt2x00dev, reg,
+                                              &addr_entry, sizeof(addr_entry));
+
+                /*
+                 * Enable pairwise lookup table for given BSS idx,
+                 * without this received frames will not be decrypted
+                 * by the hardware.
+                 */
+                rt2x00pci_register_read(rt2x00dev, SEC_CSR4, &reg);
+                reg |= (1 << crypto->bssidx);
+                rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg);
+
+                /*
+                 * The driver does not support the IV/EIV generation
+                 * in hardware. However it doesn't support the IV/EIV
+                 * inside the ieee80211 frame either, but requires it
+                 * to be provided seperately for the descriptor.
+                 * rt2x00lib will cut the IV/EIV data out of all frames
+                 * given to us by mac80211, but we must tell mac80211
+                 * to generate the IV/EIV data.
+                 */
+                key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+        }
+
+        /*
+         * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+         * a particular key is valid. Because using the FIELD32()
+         * defines directly will cause a lot of overhead we use
+         * a calculation to determine the correct bit directly.
+         */
+        if (key->hw_key_idx < 32) {
+                mask = 1 << key->hw_key_idx;
+
+                rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
+                if (crypto->cmd == SET_KEY)
+                        reg |= mask;
+                else if (crypto->cmd == DISABLE_KEY)
+                        reg &= ~mask;
+                rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg);
+        } else {
+                mask = 1 << (key->hw_key_idx - 32);
+
+                rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
+                if (crypto->cmd == SET_KEY)
+                        reg |= mask;
+                else if (crypto->cmd == DISABLE_KEY)
+                        reg &= ~mask;
+                rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg);
+        }
+
+        return 0;
+}
+
 static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
                                   const unsigned int filter_flags)
 {
@@ -1533,8 +1731,8 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
  * TX descriptor initialization
  */
 static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
-                                    struct sk_buff *skb,
-                                    struct txentry_desc *txdesc)
+                                  struct sk_buff *skb,
+                                  struct txentry_desc *txdesc)
 {
         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
         __le32 *txd = skbdesc->desc;
@@ -1548,7 +1746,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
         rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
-        rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+        rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
         rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
                            test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
         rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
@@ -1561,6 +1759,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
         rt2x00_desc_write(txd, 2, word);
 
+        if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+                _rt2x00_desc_write(txd, 3, skbdesc->iv);
+                _rt2x00_desc_write(txd, 4, skbdesc->eiv);
+        }
+
         rt2x00_desc_read(txd, 5, &word);
         rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid);
         rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
@@ -1595,11 +1798,15 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
                            test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
-        rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
+        rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+                           test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+        rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+                           test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+        rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
         rt2x00_set_field32(&word, TXD_W0_BURST,
                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
-        rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+        rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
         rt2x00_desc_write(txd, 0, word);
 }
 
@@ -1718,6 +1925,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 static void rt61pci_fill_rxdone(struct queue_entry *entry,
                                 struct rxdone_entry_desc *rxdesc)
 {
+        struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
         u32 word0;
         u32 word1;
@@ -1728,6 +1936,38 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry,
         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
+        if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+                rxdesc->cipher =
+                    rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+                rxdesc->cipher_status =
+                    rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+        }
+
+        if (rxdesc->cipher != CIPHER_NONE) {
+                _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv);
+                _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv);
+                _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv);
+
+                /*
+                 * Hardware has stripped IV/EIV data from 802.11 frame during
+                 * decryption. It has provided the data seperately but rt2x00lib
+                 * should decide if it should be reinserted.
+                 */
+                rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+                /*
+                 * FIXME: Legacy driver indicates that the frame does
+                 * contain the Michael Mic. Unfortunately, in rt2x00
+                 * the MIC seems to be missing completely...
+                 */
+                rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+                if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+                        rxdesc->flags |= RX_FLAG_DECRYPTED;
+                else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+                        rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+        }
+
         /*
          * Obtain the status about this packet.
          * When frame was received with an OFDM bitrate,
@@ -1735,7 +1975,7 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry,
          * a CCK bitrate the signal is the rate in 100kbit/s.
          */
         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
-        rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
+        rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1);
         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
 
         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
@@ -2355,6 +2595,7 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
          */
         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
         __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+        __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 
         /*
          * Set the rssi offset.
@@ -2404,6 +2645,7 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
         .config                 = rt2x00mac_config,
         .config_interface       = rt2x00mac_config_interface,
         .configure_filter       = rt2x00mac_configure_filter,
+        .set_key                = rt2x00mac_set_key,
         .get_stats              = rt2x00mac_get_stats,
         .set_retry_limit        = rt61pci_set_retry_limit,
         .bss_info_changed       = rt2x00mac_bss_info_changed,
@@ -2432,6 +2674,8 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
         .write_beacon           = rt61pci_write_beacon,
         .kick_tx_queue          = rt61pci_kick_tx_queue,
         .fill_rxdone            = rt61pci_fill_rxdone,
+        .config_shared_key      = rt61pci_config_shared_key,
+        .config_pairwise_key    = rt61pci_config_pairwise_key,
         .config_filter          = rt61pci_config_filter,
         .config_intf            = rt61pci_config_intf,
         .config_erp             = rt61pci_config_erp,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 1004d5b899e..6d591cef3e5 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -134,6 +134,16 @@
 #define PAIRWISE_KEY_TABLE_BASE         0x1200
 #define PAIRWISE_TA_TABLE_BASE          0x1a00
 
+#define SHARED_KEY_ENTRY(__idx) \
+        ( SHARED_KEY_TABLE_BASE + \
+                ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+        ( PAIRWISE_KEY_TABLE_BASE + \
+                ((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_TA_ENTRY(__idx) \
+        ( PAIRWISE_TA_TABLE_BASE + \
+                ((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
+
 struct hw_key_entry {
         u8 key[16];
         u8 tx_mic[8];
@@ -142,7 +152,8 @@ struct hw_key_entry {
 
 struct hw_pairwise_ta_entry {
         u8 address[6];
-        u8 reserved[2];
+        u8 cipher;
+        u8 reserved;
 } __attribute__ ((packed));
 
 /*
@@ -662,6 +673,10 @@ struct hw_pairwise_ta_entry {
  * SEC_CSR4: Pairwise key table lookup control.
  */
 #define SEC_CSR4                        0x30b0
+#define SEC_CSR4_ENABLE_BSS0            FIELD32(0x00000001)
+#define SEC_CSR4_ENABLE_BSS1            FIELD32(0x00000002)
+#define SEC_CSR4_ENABLE_BSS2            FIELD32(0x00000004)
+#define SEC_CSR4_ENABLE_BSS3            FIELD32(0x00000008)
 
 /*
  * SEC_CSR5: shared key table security mode register.
@@ -1428,8 +1443,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * Word4
+ * ICV: Received ICV of originally encrypted.
+ * NOTE: This is a guess, the official definition is "reserved"
  */
-#define RXD_W4_RESERVED                 FIELD32(0xffffffff)
+#define RXD_W4_ICV                      FIELD32(0xffffffff)
 
 /*
  * the above 20-byte is called RXINFO and will be DMAed to MAC RX block