Merge branch 'master' into for-2.6.33

86 files changed, 1210 insertions, 702 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e19ca4bb751..b2f71f79baa 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -975,7 +975,7 @@ config ENC28J60_WRITEVERIFY
 
 config ETHOC
         tristate "OpenCores 10/100 Mbps Ethernet MAC support"
-        depends on NET_ETHERNET && HAS_IOMEM
+        depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
         select MII
         select PHYLIB
         select CRC32
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 2be49c81799..b25467ac895 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -628,15 +628,6 @@ static int ep93xx_open(struct net_device *dev)
         if (ep93xx_alloc_buffers(ep))
                 return -ENOMEM;
 
-        if (is_zero_ether_addr(dev->dev_addr)) {
-                random_ether_addr(dev->dev_addr);
-                printk(KERN_INFO "%s: generated random MAC address "
-                        "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name,
-                        dev->dev_addr[0], dev->dev_addr[1],
-                        dev->dev_addr[2], dev->dev_addr[3],
-                        dev->dev_addr[4], dev->dev_addr[5]);
-        }
-
         napi_enable(&ep->napi);
 
         if (ep93xx_start_hw(dev)) {
@@ -877,6 +868,9 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
         ep->mii.mdio_write = ep93xx_mdio_write;
         ep->mdc_divisor = 40;   /* Max HCLK 100 MHz, min MDIO clk 2.5 MHz.  */
 
+        if (is_zero_ether_addr(dev->dev_addr))
+                random_ether_addr(dev->dev_addr);
+
         err = register_netdev(dev);
         if (err) {
                 dev_err(&pdev->dev, "Failed to register netdev\n");
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index ce6f1ac25df..3f4b4300f53 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1088,7 +1088,14 @@ static struct net_device * au1000_probe(int port_num)
                 return NULL;
         }
 
-        if ((err = register_netdev(dev)) != 0) {
+        dev->base_addr = base;
+        dev->irq = irq;
+        dev->netdev_ops = &au1000_netdev_ops;
+        SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+        dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
+        err = register_netdev(dev);
+        if (err != 0) {
                 printk(KERN_ERR "%s: Cannot register net device, error %d\n",
                                 DRV_NAME, err);
                 free_netdev(dev);
@@ -1209,12 +1216,6 @@ static struct net_device * au1000_probe(int port_num)
                 aup->tx_db_inuse[i] = pDB;
         }
 
-        dev->base_addr = base;
-        dev->irq = irq;
-        dev->netdev_ops = &au1000_netdev_ops;
-        SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
-        dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
         /*
          * The boot code uses the ethernet controller, so reset it to start
          * fresh.  au1000_init() expects that the device is in reset state.
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index e046943ef29..2a9132343b6 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -912,9 +912,6 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id)
                         bp->istat = istat;
                         __b44_disable_ints(bp);
                         __napi_schedule(&bp->napi);
-                } else {
-                        printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
-                               dev->name);
                 }
 
 irq_ack:
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index a80da0e14a5..3b79a225628 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -259,6 +259,8 @@ struct be_adapter {
         u32 port_num;
         bool promiscuous;
         u32 cap;
+        u32 rx_fc;              /* Rx flow control */
+        u32 tx_fc;              /* Tx flow control */
 };
 
 extern const struct ethtool_ops be_ethtool_ops;
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 49953787e41..e5f9676cf1b 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -68,7 +68,7 @@ enum {
 #define CQE_STATUS_COMPL_MASK           0xFFFF
 #define CQE_STATUS_COMPL_SHIFT          0       /* bits 0 - 15 */
 #define CQE_STATUS_EXTD_MASK            0xFFFF
-#define CQE_STATUS_EXTD_SHIFT           0       /* bits 0 - 15 */
+#define CQE_STATUS_EXTD_SHIFT           16      /* bits 16 - 31 */
 
 struct be_mcc_compl {
         u32 status;             /* dword 0 */
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index cda5bf2fc50..f0fd95b43c0 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -323,10 +323,12 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
 
         if (ecmd->autoneg != 0)
                 return -EINVAL;
+        adapter->tx_fc = ecmd->tx_pause;
+        adapter->rx_fc = ecmd->rx_pause;
 
-        status = be_cmd_set_flow_control(adapter, ecmd->tx_pause,
-                        ecmd->rx_pause);
-        if (!status)
+        status = be_cmd_set_flow_control(adapter,
+                                        adapter->tx_fc, adapter->rx_fc);
+        if (status)
                 dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
 
         return status;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 1f941f02771..876b357101f 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1610,11 +1610,21 @@ static int be_open(struct net_device *netdev)
 
         status = be_cmd_link_status_query(adapter, &link_up);
         if (status)
-                return status;
+                goto ret_sts;
         be_link_status_update(adapter, link_up);
 
+        status = be_vid_config(adapter);
+        if (status)
+                goto ret_sts;
+
+        status = be_cmd_set_flow_control(adapter,
+                                        adapter->tx_fc, adapter->rx_fc);
+        if (status)
+                goto ret_sts;
+
         schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
-        return 0;
+ret_sts:
+        return status;
 }
 
 static int be_setup(struct be_adapter *adapter)
@@ -1648,17 +1658,8 @@ static int be_setup(struct be_adapter *adapter)
         if (status != 0)
                 goto rx_qs_destroy;
 
-        status = be_vid_config(adapter);
-        if (status != 0)
-                goto mccqs_destroy;
-
-        status = be_cmd_set_flow_control(adapter, true, true);
-        if (status != 0)
-                goto mccqs_destroy;
         return 0;
 
-mccqs_destroy:
-        be_mcc_queues_destroy(adapter);
 rx_qs_destroy:
         be_rx_queues_destroy(adapter);
 tx_qs_destroy:
@@ -1909,6 +1910,10 @@ static void be_netdev_init(struct net_device *netdev)
 
         adapter->rx_csum = true;
 
+        /* Default settings for Rx and Tx flow control */
+        adapter->rx_fc = true;
+        adapter->tx_fc = true;
+
         netif_set_gso_max_size(netdev, 65535);
 
         BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
@@ -2171,6 +2176,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state)
                 be_close(netdev);
                 rtnl_unlock();
         }
+        be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc);
         be_clear(adapter);
 
         pci_save_state(pdev);
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index df32c109b7a..772f6d2489c 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -35,66 +35,16 @@ config CAN_CALC_BITTIMING
           arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
           If unsure, say Y.
 
-config CAN_SJA1000
-        depends on CAN_DEV && HAS_IOMEM
-        tristate "Philips SJA1000"
-        ---help---
-          Driver for the SJA1000 CAN controllers from Philips or NXP
-
-config CAN_SJA1000_ISA
-        depends on CAN_SJA1000 && ISA
-        tristate "ISA Bus based legacy SJA1000 driver"
-        ---help---
-          This driver adds legacy support for SJA1000 chips connected to
-          the ISA bus using I/O port, memory mapped or indirect access.
-
-config CAN_SJA1000_PLATFORM
-        depends on CAN_SJA1000
-        tristate "Generic Platform Bus based SJA1000 driver"
-        ---help---
-          This driver adds support for the SJA1000 chips connected to
-          the "platform bus" (Linux abstraction for directly to the
-          processor attached devices).  Which can be found on various
-          boards from Phytec (http://www.phytec.de) like the PCM027,
-          PCM038.
-
-config CAN_SJA1000_OF_PLATFORM
-        depends on CAN_SJA1000 && PPC_OF
-        tristate "Generic OF Platform Bus based SJA1000 driver"
-        ---help---
-          This driver adds support for the SJA1000 chips connected to
-          the OpenFirmware "platform bus" found on embedded systems with
-          OpenFirmware bindings, e.g. if you have a PowerPC based system
-          you may want to enable this option.
-
-config CAN_EMS_PCI
-        tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
-        depends on PCI && CAN_SJA1000
-        ---help---
-          This driver is for the one, two or four channel CPC-PCI,
-          CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
-          (http://www.ems-wuensche.de).
-
-config CAN_EMS_USB
-        tristate "EMS CPC-USB/ARM7 CAN/USB interface"
-        depends on USB && CAN_DEV
-        ---help---
-          This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
-          from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-
-config CAN_KVASER_PCI
-        tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
-        depends on PCI && CAN_SJA1000
-        ---help---
-          This driver is for the the PCIcanx and PCIcan cards (1, 2 or
-          4 channel) from Kvaser (http://www.kvaser.com).
-
 config CAN_AT91
         tristate "Atmel AT91 onchip CAN controller"
-        depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+        depends on CAN_DEV && ARCH_AT91SAM9263
         ---help---
           This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
 
+source "drivers/net/can/sja1000/Kconfig"
+
+source "drivers/net/can/usb/Kconfig"
+
 config CAN_DEBUG_DEVICES
         bool "CAN devices debugging messages"
         depends on CAN
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index f0b9a1e1db4..2868fe842a4 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -589,6 +589,22 @@ static int can_changelink(struct net_device *dev,
         return 0;
 }
 
+static size_t can_get_size(const struct net_device *dev)
+{
+        struct can_priv *priv = netdev_priv(dev);
+        size_t size;
+
+        size = nla_total_size(sizeof(u32));   /* IFLA_CAN_STATE */
+        size += sizeof(struct can_ctrlmode);  /* IFLA_CAN_CTRLMODE */
+        size += nla_total_size(sizeof(u32));  /* IFLA_CAN_RESTART_MS */
+        size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */
+        size += sizeof(struct can_clock);     /* IFLA_CAN_CLOCK */
+        if (priv->bittiming_const)            /* IFLA_CAN_BITTIMING_CONST */
+                size += sizeof(struct can_bittiming_const);
+
+        return size;
+}
+
 static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
 {
         struct can_priv *priv = netdev_priv(dev);
@@ -613,6 +629,11 @@ nla_put_failure:
         return -EMSGSIZE;
 }
 
+static size_t can_get_xstats_size(const struct net_device *dev)
+{
+        return sizeof(struct can_device_stats);
+}
+
 static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
 {
         struct can_priv *priv = netdev_priv(dev);
@@ -639,7 +660,9 @@ static struct rtnl_link_ops can_link_ops __read_mostly = {
         .setup          = can_setup,
         .newlink        = can_newlink,
         .changelink     = can_changelink,
+        .get_size       = can_get_size,
         .fill_info      = can_fill_info,
+        .get_xstats_size = can_get_xstats_size,
         .fill_xstats    = can_fill_xstats,
 };
 
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
new file mode 100644
index 00000000000..4c674927f24
--- /dev/null
+++ b/drivers/net/can/sja1000/Kconfig
@@ -0,0 +1,47 @@
+menuconfig CAN_SJA1000
+        tristate "Philips/NXP SJA1000 devices"
+        depends on CAN_DEV && HAS_IOMEM
+
+if CAN_SJA1000
+
+config CAN_SJA1000_ISA
+        tristate "ISA Bus based legacy SJA1000 driver"
+        depends on ISA
+        ---help---
+          This driver adds legacy support for SJA1000 chips connected to
+          the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+        tristate "Generic Platform Bus based SJA1000 driver"
+        ---help---
+          This driver adds support for the SJA1000 chips connected to
+          the "platform bus" (Linux abstraction for directly to the
+          processor attached devices).  Which can be found on various
+          boards from Phytec (http://www.phytec.de) like the PCM027,
+          PCM038.
+
+config CAN_SJA1000_OF_PLATFORM
+        tristate "Generic OF Platform Bus based SJA1000 driver"
+        depends on PPC_OF
+        ---help---
+          This driver adds support for the SJA1000 chips connected to
+          the OpenFirmware "platform bus" found on embedded systems with
+          OpenFirmware bindings, e.g. if you have a PowerPC based system
+          you may want to enable this option.
+
+config CAN_EMS_PCI
+        tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+        depends on PCI
+        ---help---
+          This driver is for the one, two or four channel CPC-PCI,
+          CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+          (http://www.ems-wuensche.de).
+
+config CAN_KVASER_PCI
+        tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+        depends on PCI
+        ---help---
+          This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+          4 channel) from Kvaser (http://www.kvaser.com).
+
+endif
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
new file mode 100644
index 00000000000..bbc78e0b8a1
--- /dev/null
+++ b/drivers/net/can/usb/Kconfig
@@ -0,0 +1,10 @@
+menu "CAN USB interfaces"
+        depends on USB && CAN_DEV
+
+config CAN_EMS_USB
+        tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+        ---help---
+          This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+          from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+endmenu
diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile
index c3f75ba701b..0afd51d4c7a 100644
--- a/drivers/net/can/usb/Makefile
+++ b/drivers/net/can/usb/Makefile
@@ -3,3 +3,5 @@
 #
 
 obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 9012e0abc62..abdbd9c2b78 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -319,7 +319,7 @@ static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
 
         cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
 
-        cf->can_id = msg->msg.can_msg.id;
+        cf->can_id = le32_to_cpu(msg->msg.can_msg.id);
         cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
 
         if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME
@@ -813,6 +813,9 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
                 msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc;
         }
 
+        /* Respect byte order */
+        msg->msg.can_msg.id = cpu_to_le32(msg->msg.can_msg.id);
+
         for (i = 0; i < MAX_TX_URBS; i++) {
                 if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) {
                         context = &dev->tx_contexts[i];
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 05916aafa4f..f857afe8e48 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -4342,11 +4342,11 @@ static int cas_open(struct net_device *dev)
                 cas_unlock_all_restore(cp, flags);
         }
 
+        err = -ENOMEM;
         if (cas_tx_tiny_alloc(cp) < 0)
-                return -ENOMEM;
+                goto err_unlock;
 
         /* alloc rx descriptors */
-        err = -ENOMEM;
         if (cas_alloc_rxds(cp) < 0)
                 goto err_tx_tiny;
 
@@ -4386,6 +4386,7 @@ err_spare:
         cas_free_rxds(cp);
 err_tx_tiny:
         cas_tx_tiny_free(cp);
+err_unlock:
         mutex_unlock(&cp->pm_mutex);
         return err;
 }
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index f86612857a7..6366061712f 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -879,7 +879,7 @@ recycle:
         pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len,
                                     PCI_DMA_FROMDEVICE);
         (*sd->pg_chunk.p_cnt)--;
-        if (!*sd->pg_chunk.p_cnt)
+        if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
                 pci_unmap_page(adap->pdev,
                                sd->pg_chunk.mapping,
                                fl->alloc_size,
@@ -2088,7 +2088,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
                                     PCI_DMA_FROMDEVICE);
 
         (*sd->pg_chunk.p_cnt)--;
-        if (!*sd->pg_chunk.p_cnt)
+        if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
                 pci_unmap_page(adap->pdev,
                                sd->pg_chunk.mapping,
                                fl->alloc_size,
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index f72c56dec33..e3478314c00 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -164,16 +164,14 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 # define EMAC_MBP_MCASTCHAN(ch)         ((ch) & 0x7)
 
 /* EMAC mac_control register */
-#define EMAC_MACCONTROL_TXPTYPE         (0x200)
-#define EMAC_MACCONTROL_TXPACEEN        (0x40)
-#define EMAC_MACCONTROL_MIIEN           (0x20)
-#define EMAC_MACCONTROL_GIGABITEN       (0x80)
-#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7)
-#define EMAC_MACCONTROL_FULLDUPLEXEN    (0x1)
+#define EMAC_MACCONTROL_TXPTYPE         BIT(9)
+#define EMAC_MACCONTROL_TXPACEEN        BIT(6)
+#define EMAC_MACCONTROL_GMIIEN          BIT(5)
+#define EMAC_MACCONTROL_GIGABITEN       BIT(7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN    BIT(0)
 #define EMAC_MACCONTROL_RMIISPEED_MASK  BIT(15)
 
 /* GIGABIT MODE related bits */
-#define EMAC_DM646X_MACCONTORL_GMIIEN   BIT(5)
 #define EMAC_DM646X_MACCONTORL_GIG      BIT(7)
 #define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17)
 
@@ -192,10 +190,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 #define EMAC_RX_BUFFER_OFFSET_MASK      (0xFFFF)
 
 /* MAC_IN_VECTOR (0x180) register bit fields */
-#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT            (0x20000)
-#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT        (0x10000)
-#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC          (0x0100)
-#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC          (0x01)
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT      BIT(17)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT  BIT(16)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC    BIT(8)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC    BIT(0)
 
 /** NOTE:: For DM646x the IN_VECTOR has changed */
 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC    BIT(EMAC_DEF_RX_CH)
@@ -203,7 +201,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT      BIT(26)
 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT  BIT(27)
 
-
 /* CPPI bit positions */
 #define EMAC_CPPI_SOP_BIT               BIT(31)
 #define EMAC_CPPI_EOP_BIT               BIT(30)
@@ -750,8 +747,7 @@ static void emac_update_phystatus(struct emac_priv *priv)
 
         if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
                 mac_control = emac_read(EMAC_MACCONTROL);
-                mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN |
-                                EMAC_DM646X_MACCONTORL_GIG |
+                mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
                                 EMAC_DM646X_MACCONTORL_GIGFORCE);
         } else {
                 /* Clear the GIG bit and GIGFORCE bit */
@@ -2108,7 +2104,7 @@ static int emac_hw_enable(struct emac_priv *priv)
 
         /* Enable MII */
         val = emac_read(EMAC_MACCONTROL);
-        val |= (EMAC_MACCONTROL_MIIEN);
+        val |= (EMAC_MACCONTROL_GMIIEN);
         emac_write(EMAC_MACCONTROL, val);
 
         /* Enable NAPI and interrupts */
@@ -2140,9 +2136,6 @@ static int emac_poll(struct napi_struct *napi, int budget)
         u32 status = 0;
         u32 num_pkts = 0;
 
-        if (!netif_running(ndev))
-                return 0;
-
         /* Check interrupt vectors and call packet processing */
         status = emac_read(EMAC_MACINVECTOR);
 
@@ -2221,7 +2214,7 @@ void emac_poll_controller(struct net_device *ndev)
         struct emac_priv *priv = netdev_priv(ndev);
 
         emac_int_disable(priv);
-        emac_irq(ndev->irq, priv);
+        emac_irq(ndev->irq, ndev);
         emac_int_enable(priv);
 }
 #endif
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 5d2f48f0225..d269a68ce35 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -157,6 +157,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/mii.h>
@@ -602,6 +603,7 @@ struct nic {
         struct mem *mem;
         dma_addr_t dma_addr;
 
+        struct pci_pool *cbs_pool;
         dma_addr_t cbs_dma_addr;
         u8 adaptive_ifs;
         u8 tx_threshold;
@@ -1427,19 +1429,31 @@ static int e100_phy_init(struct nic *nic)
         } else
                 DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
 
-        /* Isolate all the PHY ids */
-        for (addr = 0; addr < 32; addr++)
-                mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
-        /* Select the discovered PHY */
-        bmcr &= ~BMCR_ISOLATE;
-        mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
-
         /* Get phy ID */
         id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
         id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
         nic->phy = (u32)id_hi << 16 | (u32)id_lo;
         DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
 
+        /* Select the phy and isolate the rest */
+        for (addr = 0; addr < 32; addr++) {
+                if (addr != nic->mii.phy_id) {
+                        mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+                } else if (nic->phy != phy_82552_v) {
+                        bmcr = mdio_read(netdev, addr, MII_BMCR);
+                        mdio_write(netdev, addr, MII_BMCR,
+                                bmcr & ~BMCR_ISOLATE);
+                }
+        }
+        /*
+         * Workaround for 82552:
+         * Clear the ISOLATE bit on selected phy_id last (mirrored on all
+         * other phy_id's) using bmcr value from addr discovery loop above.
+         */
+        if (nic->phy == phy_82552_v)
+                mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
+                        bmcr & ~BMCR_ISOLATE);
+
         /* Handle National tx phys */
 #define NCS_PHY_MODEL_MASK      0xFFF0FFFF
         if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
@@ -1781,9 +1795,7 @@ static void e100_clean_cbs(struct nic *nic)
                         nic->cb_to_clean = nic->cb_to_clean->next;
                         nic->cbs_avail++;
                 }
-                pci_free_consistent(nic->pdev,
-                        sizeof(struct cb) * nic->params.cbs.count,
-                        nic->cbs, nic->cbs_dma_addr);
+                pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr);
                 nic->cbs = NULL;
                 nic->cbs_avail = 0;
         }
@@ -1801,8 +1813,8 @@ static int e100_alloc_cbs(struct nic *nic)
         nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
         nic->cbs_avail = 0;
 
-        nic->cbs = pci_alloc_consistent(nic->pdev,
-                sizeof(struct cb) * count, &nic->cbs_dma_addr);
+        nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL,
+                                  &nic->cbs_dma_addr);
         if (!nic->cbs)
                 return -ENOMEM;
 
@@ -2829,7 +2841,11 @@ static int __devinit e100_probe(struct pci_dev *pdev,
                 DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
                 goto err_out_free;
         }
-
+        nic->cbs_pool = pci_pool_create(netdev->name,
+                           nic->pdev,
+                           nic->params.cbs.count * sizeof(struct cb),
+                           sizeof(u32),
+                           0);
         DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
                 (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
                 pdev->irq, netdev->dev_addr);
@@ -2859,6 +2875,7 @@ static void __devexit e100_remove(struct pci_dev *pdev)
                 unregister_netdev(netdev);
                 e100_free(nic);
                 pci_iounmap(pdev, nic->csr);
+                pci_pool_destroy(nic->cbs_pool);
                 free_netdev(netdev);
                 pci_release_regions(pdev);
                 pci_disable_device(pdev);
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index c0f185beb8b..1190167a8b3 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -76,6 +76,7 @@
 /* Extended Device Control */
 #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
 #define E1000_CTRL_EXT_EE_RST    0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_SPD_BYPS  0x00008000 /* Speed Select Bypass */
 #define E1000_CTRL_EXT_RO_DIS    0x00020000 /* Relaxed Ordering disable */
 #define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
@@ -347,6 +348,7 @@
 /* Extended Configuration Control and Size */
 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP      0x00000020
 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE       0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE       0x00000008
 #define E1000_EXTCNF_CTRL_SWFLAG                 0x00000020
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK   0x00FF0000
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT          16
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 405a144ebca..3e187b0e420 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -141,6 +141,22 @@ struct e1000_info;
 #define HV_TNCRS_UPPER          PHY_REG(778, 29) /* Transmit with no CRS */
 #define HV_TNCRS_LOWER          PHY_REG(778, 30)
 
+#define E1000_FCRTV_PCH     0x05F40 /* PCH Flow Control Refresh Timer Value */
+
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS                      17
+#define BM_CS_STATUS_LINK_UP              0x0400
+#define BM_CS_STATUS_RESOLVED             0x0800
+#define BM_CS_STATUS_SPEED_MASK           0xC000
+#define BM_CS_STATUS_SPEED_1000           0x8000
+
+/* 82577 Mobile Phy Status Register */
+#define HV_M_STATUS                       26
+#define HV_M_STATUS_AUTONEG_COMPLETE      0x1000
+#define HV_M_STATUS_SPEED_MASK            0x0300
+#define HV_M_STATUS_SPEED_1000            0x0200
+#define HV_M_STATUS_LINK_UP               0x0040
+
 enum e1000_boards {
         board_82571,
         board_82572,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 1bf4d2a5d34..e82638ecae8 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -327,10 +327,18 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 
                 hw->fc.current_mode = hw->fc.requested_mode;
 
-                retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
-                          hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
+                if (hw->phy.media_type == e1000_media_type_fiber) {
+                        retval = hw->mac.ops.setup_link(hw);
+                        /* implicit goto out */
+                } else {
+                        retval = e1000e_force_mac_fc(hw);
+                        if (retval)
+                                goto out;
+                        e1000e_set_fc_watermarks(hw);
+                }
         }
 
+out:
         clear_bit(__E1000_RESETTING, &adapter->state);
         return retval;
 }
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 7b05cf47f7f..aaea41ef794 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -903,6 +903,7 @@ struct e1000_shadow_ram {
 struct e1000_dev_spec_ich8lan {
         bool kmrn_lock_loss_workaround_enabled;
         struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
+        bool nvm_k1_enabled;
 };
 
 struct e1000_hw {
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index b6388b9535f..eff3f478365 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -124,11 +124,25 @@
 
 #define SW_FLAG_TIMEOUT    1000 /* SW Semaphore flag timeout in milliseconds */
 
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR            PHY_REG(768, 26)
+#define HV_SMB_ADDR_PEC_EN     0x0200
+#define HV_SMB_ADDR_VALID      0x0080
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP                     0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK  0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+
 /* OEM Bits Phy Register */
 #define HV_OEM_BITS            PHY_REG(768, 25)
 #define HV_OEM_BITS_LPLU       0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS    0x0040 /* Gigabit Disable */
 #define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
 
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1  /* NVM Enable K1 bit */
+
 /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
 /* Offset 04h HSFSTS */
 union ich8_hws_flash_status {
@@ -208,6 +222,9 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
 static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -483,14 +500,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
                 goto out;
         }
 
-        if (hw->mac.type == e1000_pchlan) {
-                ret_val = e1000e_write_kmrn_reg(hw,
-                                                   E1000_KMRNCTRLSTA_K1_CONFIG,
-                                                   E1000_KMRNCTRLSTA_K1_ENABLE);
-                if (ret_val)
-                        goto out;
-        }
-
         /*
          * First we want to see if the MII Status Register reports
          * link.  If so, then we want to get the current speed/duplex
@@ -500,6 +509,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
         if (ret_val)
                 goto out;
 
+        if (hw->mac.type == e1000_pchlan) {
+                ret_val = e1000_k1_gig_workaround_hv(hw, link);
+                if (ret_val)
+                        goto out;
+        }
+
         if (!link)
                 goto out; /* No link detected */
 
@@ -794,6 +809,327 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
 }
 
 /**
+ *  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
+ *  @hw:   pointer to the HW structure
+ *
+ *  SW should configure the LCD from the NVM extended configuration region
+ *  as a workaround for certain parts.
+ **/
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
+{
+        struct e1000_phy_info *phy = &hw->phy;
+        u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
+        s32 ret_val;
+        u16 word_addr, reg_data, reg_addr, phy_page = 0;
+
+        ret_val = hw->phy.ops.acquire_phy(hw);
+        if (ret_val)
+                return ret_val;
+
+        /*
+         * Initialize the PHY from the NVM on ICH platforms.  This
+         * is needed due to an issue where the NVM configuration is
+         * not properly autoloaded after power transitions.
+         * Therefore, after each PHY reset, we will load the
+         * configuration data out of the NVM manually.
+         */
+        if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) ||
+                (hw->mac.type == e1000_pchlan)) {
+                struct e1000_adapter *adapter = hw->adapter;
+
+                /* Check if SW needs to configure the PHY */
+                if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
+                    (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
+                    (hw->mac.type == e1000_pchlan))
+                        sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+                else
+                        sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+
+                data = er32(FEXTNVM);
+                if (!(data & sw_cfg_mask))
+                        goto out;
+
+                /* Wait for basic configuration completes before proceeding */
+                e1000_lan_init_done_ich8lan(hw);
+
+                /*
+                 * Make sure HW does not configure LCD from PHY
+                 * extended configuration before SW configuration
+                 */
+                data = er32(EXTCNF_CTRL);
+                if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+                        goto out;
+
+                cnf_size = er32(EXTCNF_SIZE);
+                cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+                cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+                if (!cnf_size)
+                        goto out;
+
+                cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+                cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
+                if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
+                    (hw->mac.type == e1000_pchlan)) {
+                        /*
+                         * HW configures the SMBus address and LEDs when the
+                         * OEM and LCD Write Enable bits are set in the NVM.
+                         * When both NVM bits are cleared, SW will configure
+                         * them instead.
+                         */
+                        data = er32(STRAP);
+                        data &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+                        reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;
+                        reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+                        ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,
+                                                                reg_data);
+                        if (ret_val)
+                                goto out;
+
+                        data = er32(LEDCTL);
+                        ret_val = e1000_write_phy_reg_hv_locked(hw,
+                                                                HV_LED_CONFIG,
+                                                                (u16)data);
+                        if (ret_val)
+                                goto out;
+                }
+                /* Configure LCD from extended configuration region. */
+
+                /* cnf_base_addr is in DWORD */
+                word_addr = (u16)(cnf_base_addr << 1);
+
+                for (i = 0; i < cnf_size; i++) {
+                        ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
+                                                   &reg_data);
+                        if (ret_val)
+                                goto out;
+
+                        ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
+                                                   1, &reg_addr);
+                        if (ret_val)
+                                goto out;
+
+                        /* Save off the PHY page for future writes. */
+                        if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
+                                phy_page = reg_data;
+                                continue;
+                        }
+
+                        reg_addr &= PHY_REG_MASK;
+                        reg_addr |= phy_page;
+
+                        ret_val = phy->ops.write_phy_reg_locked(hw,
+                                                            (u32)reg_addr,
+                                                            reg_data);
+                        if (ret_val)
+                                goto out;
+                }
+        }
+
+out:
+        hw->phy.ops.release_phy(hw);
+        return ret_val;
+}
+
+/**
+ *  e1000_k1_gig_workaround_hv - K1 Si workaround
+ *  @hw:   pointer to the HW structure
+ *  @link: link up bool flag
+ *
+ *  If K1 is enabled for 1Gbps, the MAC might stall when transitioning
+ *  from a lower speed.  This workaround disables K1 whenever link is at 1Gig
+ *  If link is down, the function will restore the default K1 setting located
+ *  in the NVM.
+ **/
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
+{
+        s32 ret_val = 0;
+        u16 status_reg = 0;
+        bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
+
+        if (hw->mac.type != e1000_pchlan)
+                goto out;
+
+        /* Wrap the whole flow with the sw flag */
+        ret_val = hw->phy.ops.acquire_phy(hw);
+        if (ret_val)
+                goto out;
+
+        /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
+        if (link) {
+                if (hw->phy.type == e1000_phy_82578) {
+                        ret_val = hw->phy.ops.read_phy_reg_locked(hw,
+                                                                  BM_CS_STATUS,
+                                                                  &status_reg);
+                        if (ret_val)
+                                goto release;
+
+                        status_reg &= BM_CS_STATUS_LINK_UP |
+                                      BM_CS_STATUS_RESOLVED |
+                                      BM_CS_STATUS_SPEED_MASK;
+
+                        if (status_reg == (BM_CS_STATUS_LINK_UP |
+                                           BM_CS_STATUS_RESOLVED |
+                                           BM_CS_STATUS_SPEED_1000))
+                                k1_enable = false;
+                }
+
+                if (hw->phy.type == e1000_phy_82577) {
+                        ret_val = hw->phy.ops.read_phy_reg_locked(hw,
+                                                                  HV_M_STATUS,
+                                                                  &status_reg);
+                        if (ret_val)
+                                goto release;
+
+                        status_reg &= HV_M_STATUS_LINK_UP |
+                                      HV_M_STATUS_AUTONEG_COMPLETE |
+                                      HV_M_STATUS_SPEED_MASK;
+
+                        if (status_reg == (HV_M_STATUS_LINK_UP |
+                                           HV_M_STATUS_AUTONEG_COMPLETE |
+                                           HV_M_STATUS_SPEED_1000))
+                                k1_enable = false;
+                }
+
+                /* Link stall fix for link up */
+                ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+                                                           0x0100);
+                if (ret_val)
+                        goto release;
+
+        } else {
+                /* Link stall fix for link down */
+                ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+                                                           0x4100);
+                if (ret_val)
+                        goto release;
+        }
+
+        ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
+
+release:
+        hw->phy.ops.release_phy(hw);
+out:
+        return ret_val;
+}
+
+/**
+ *  e1000_configure_k1_ich8lan - Configure K1 power state
+ *  @hw: pointer to the HW structure
+ *  @enable: K1 state to configure
+ *
+ *  Configure the K1 power state based on the provided parameter.
+ *  Assumes semaphore already acquired.
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ **/
+static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+{
+        s32 ret_val = 0;
+        u32 ctrl_reg = 0;
+        u32 ctrl_ext = 0;
+        u32 reg = 0;
+        u16 kmrn_reg = 0;
+
+        ret_val = e1000e_read_kmrn_reg_locked(hw,
+                                             E1000_KMRNCTRLSTA_K1_CONFIG,
+                                             &kmrn_reg);
+        if (ret_val)
+                goto out;
+
+        if (k1_enable)
+                kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
+        else
+                kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
+
+        ret_val = e1000e_write_kmrn_reg_locked(hw,
+                                              E1000_KMRNCTRLSTA_K1_CONFIG,
+                                              kmrn_reg);
+        if (ret_val)
+                goto out;
+
+        udelay(20);
+        ctrl_ext = er32(CTRL_EXT);
+        ctrl_reg = er32(CTRL);
+
+        reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+        reg |= E1000_CTRL_FRCSPD;
+        ew32(CTRL, reg);
+
+        ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
+        udelay(20);
+        ew32(CTRL, ctrl_reg);
+        ew32(CTRL_EXT, ctrl_ext);
+        udelay(20);
+
+out:
+        return ret_val;
+}
+
+/**
+ *  e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
+ *  @hw:       pointer to the HW structure
+ *  @d0_state: boolean if entering d0 or d3 device state
+ *
+ *  SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
+ *  collectively called OEM bits.  The OEM Write Enable bit and SW Config bit
+ *  in NVM determines whether HW should configure LPLU and Gbe Disable.
+ **/
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
+{
+        s32 ret_val = 0;
+        u32 mac_reg;
+        u16 oem_reg;
+
+        if (hw->mac.type != e1000_pchlan)
+                return ret_val;
+
+        ret_val = hw->phy.ops.acquire_phy(hw);
+        if (ret_val)
+                return ret_val;
+
+        mac_reg = er32(EXTCNF_CTRL);
+        if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+                goto out;
+
+        mac_reg = er32(FEXTNVM);
+        if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
+                goto out;
+
+        mac_reg = er32(PHY_CTRL);
+
+        ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg);
+        if (ret_val)
+                goto out;
+
+        oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
+
+        if (d0_state) {
+                if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
+                        oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+                if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
+                        oem_reg |= HV_OEM_BITS_LPLU;
+        } else {
+                if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE)
+                        oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+                if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU)
+                        oem_reg |= HV_OEM_BITS_LPLU;
+        }
+        /* Restart auto-neg to activate the bits */
+        if (!e1000_check_reset_block(hw))
+                oem_reg |= HV_OEM_BITS_RESTART_AN;
+        ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
+
+out:
+        hw->phy.ops.release_phy(hw);
+
+        return ret_val;
+}
+
+
+/**
  *  e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
  *  done after every PHY reset.
  **/
@@ -833,10 +1169,20 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
         ret_val = hw->phy.ops.acquire_phy(hw);
         if (ret_val)
                 return ret_val;
+
         hw->phy.addr = 1;
-        e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+        ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+        if (ret_val)
+                goto out;
         hw->phy.ops.release_phy(hw);
 
+        /*
+         * Configure the K1 Si workaround during phy reset assuming there is
+         * link so that it disables K1 if link is in 1Gbps.
+         */
+        ret_val = e1000_k1_gig_workaround_hv(hw, true);
+
+out:
         return ret_val;
 }
 
@@ -882,11 +1228,8 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
 {
-        struct e1000_phy_info *phy = &hw->phy;
-        u32 i;
-        u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
-        s32 ret_val;
-        u16 reg, word_addr, reg_data, reg_addr, phy_page = 0;
+        s32 ret_val = 0;
+        u16 reg;
 
         ret_val = e1000e_phy_hw_reset_generic(hw);
         if (ret_val)
@@ -905,81 +1248,16 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
         if (hw->mac.type == e1000_pchlan)
                 e1e_rphy(hw, BM_WUC, &reg);
 
-        /*
-         * Initialize the PHY from the NVM on ICH platforms.  This
-         * is needed due to an issue where the NVM configuration is
-         * not properly autoloaded after power transitions.
-         * Therefore, after each PHY reset, we will load the
-         * configuration data out of the NVM manually.
-         */
-        if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) {
-                struct e1000_adapter *adapter = hw->adapter;
-
-                /* Check if SW needs configure the PHY */
-                if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
-                    (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M))
-                        sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
-                else
-                        sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
-
-                data = er32(FEXTNVM);
-                if (!(data & sw_cfg_mask))
-                        return 0;
-
-                /* Wait for basic configuration completes before proceeding */
-                e1000_lan_init_done_ich8lan(hw);
-
-                /*
-                 * Make sure HW does not configure LCD from PHY
-                 * extended configuration before SW configuration
-                 */
-                data = er32(EXTCNF_CTRL);
-                if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
-                        return 0;
-
-                cnf_size = er32(EXTCNF_SIZE);
-                cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
-                cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
-                if (!cnf_size)
-                        return 0;
-
-                cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
-                cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
-
-                /* Configure LCD from extended configuration region. */
-
-                /* cnf_base_addr is in DWORD */
-                word_addr = (u16)(cnf_base_addr << 1);
-
-                for (i = 0; i < cnf_size; i++) {
-                        ret_val = e1000_read_nvm(hw,
-                                                (word_addr + i * 2),
-                                                1,
-                                                &reg_data);
-                        if (ret_val)
-                                return ret_val;
-
-                        ret_val = e1000_read_nvm(hw,
-                                                (word_addr + i * 2 + 1),
-                                                1,
-                                                &reg_addr);
-                        if (ret_val)
-                                return ret_val;
-
-                        /* Save off the PHY page for future writes. */
-                        if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
-                                phy_page = reg_data;
-                                continue;
-                        }
-
-                        reg_addr |= phy_page;
+        /* Configure the LCD with the extended configuration region in NVM */
+        ret_val = e1000_sw_lcd_config_ich8lan(hw);
+        if (ret_val)
+                goto out;
 
-                        ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data);
-                        if (ret_val)
-                                return ret_val;
-                }
-        }
+        /* Configure the LCD with the OEM bits in NVM */
+        if (hw->mac.type == e1000_pchlan)
+                ret_val = e1000_oem_bits_config_ich8lan(hw, true);
 
+out:
         return 0;
 }
 
@@ -2306,6 +2584,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
  **/
 static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 {
+        struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
         u16 reg;
         u32 ctrl, icr, kab;
         s32 ret_val;
@@ -2341,6 +2620,18 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
                 ew32(PBS, E1000_PBS_16K);
         }
 
+        if (hw->mac.type == e1000_pchlan) {
+                /* Save the NVM K1 bit setting*/
+                ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &reg);
+                if (ret_val)
+                        return ret_val;
+
+                if (reg & E1000_NVM_K1_ENABLE)
+                        dev_spec->nvm_k1_enabled = true;
+                else
+                        dev_spec->nvm_k1_enabled = false;
+        }
+
         ctrl = er32(CTRL);
 
         if (!e1000_check_reset_block(hw)) {
@@ -2386,6 +2677,15 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
         if (hw->mac.type == e1000_pchlan)
                 e1e_rphy(hw, BM_WUC, &reg);
 
+        ret_val = e1000_sw_lcd_config_ich8lan(hw);
+        if (ret_val)
+                goto out;
+
+        if (hw->mac.type == e1000_pchlan) {
+                ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+                if (ret_val)
+                        goto out;
+        }
         /*
          * For PCH, this write will make sure that any noise
          * will be detected as a CRC error and be dropped rather than show up
@@ -2404,6 +2704,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
         if (hw->mac.type == e1000_pchlan)
                 ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
 
+out:
         return ret_val;
 }
 
@@ -2708,14 +3009,6 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
         if (ret_val)
                 return ret_val;
 
-        if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
-                ret_val = e1000e_write_kmrn_reg(hw,
-                                                  E1000_KMRNCTRLSTA_K1_CONFIG,
-                                                  E1000_KMRNCTRLSTA_K1_DISABLE);
-                if (ret_val)
-                        return ret_val;
-        }
-
         if ((hw->mac.type == e1000_ich8lan) &&
             (hw->phy.type == e1000_phy_igp_3) &&
             (*speed == SPEED_1000)) {
@@ -3266,6 +3559,7 @@ struct e1000_info e1000_pch_info = {
                                   | FLAG_HAS_AMT
                                   | FLAG_HAS_FLASH
                                   | FLAG_HAS_JUMBO_FRAMES
+                                  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
                                   | FLAG_APME_IN_WUC,
         .pba                    = 26,
         .max_hw_frame_size      = 4096,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0687c6aa4e4..fad8f9ea004 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -2769,25 +2769,38 @@ void e1000e_reset(struct e1000_adapter *adapter)
         /*
          * flow control settings
          *
-         * The high water mark must be low enough to fit two full frame
+         * The high water mark must be low enough to fit one full frame
          * (or the size used for early receive) above it in the Rx FIFO.
          * Set it to the lower of:
          * - 90% of the Rx FIFO size, and
          * - the full Rx FIFO size minus the early receive size (for parts
          *   with ERT support assuming ERT set to E1000_ERT_2048), or
-         * - the full Rx FIFO size minus two full frames
+         * - the full Rx FIFO size minus one full frame
          */
-        if ((adapter->flags & FLAG_HAS_ERT) &&
-            (adapter->netdev->mtu > ETH_DATA_LEN))
-                hwm = min(((pba << 10) * 9 / 10),
-                          ((pba << 10) - (E1000_ERT_2048 << 3)));
-        else
-                hwm = min(((pba << 10) * 9 / 10),
-                          ((pba << 10) - (2 * adapter->max_frame_size)));
+        if (hw->mac.type == e1000_pchlan) {
+                /*
+                 * Workaround PCH LOM adapter hangs with certain network
+                 * loads.  If hangs persist, try disabling Tx flow control.
+                 */
+                if (adapter->netdev->mtu > ETH_DATA_LEN) {
+                        fc->high_water = 0x3500;
+                        fc->low_water  = 0x1500;
+                } else {
+                        fc->high_water = 0x5000;
+                        fc->low_water  = 0x3000;
+                }
+        } else {
+                if ((adapter->flags & FLAG_HAS_ERT) &&
+                    (adapter->netdev->mtu > ETH_DATA_LEN))
+                        hwm = min(((pba << 10) * 9 / 10),
+                                  ((pba << 10) - (E1000_ERT_2048 << 3)));
+                else
+                        hwm = min(((pba << 10) * 9 / 10),
+                                  ((pba << 10) - adapter->max_frame_size));
 
-        fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
-        fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
-        fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
+                fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+                fc->low_water = fc->high_water - 8;
+        }
 
         if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
                 fc->pause_time = 0xFFFF;
@@ -2813,6 +2826,10 @@ void e1000e_reset(struct e1000_adapter *adapter)
         if (mac->ops.init_hw(hw))
                 e_err("Hardware Error\n");
 
+        /* additional part of the flow-control workaround above */
+        if (hw->mac.type == e1000_pchlan)
+                ew32(FCRTV_PCH, 0x1000);
+
         e1000_update_mng_vlan(adapter);
 
         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
@@ -3610,7 +3627,7 @@ static void e1000_watchdog_task(struct work_struct *work)
                         case SPEED_100:
                                 txb2b = 0;
                                 netdev->tx_queue_len = 100;
-                                /* maybe add some timeout factor ? */
+                                adapter->tx_timeout_factor = 10;
                                 break;
                         }
 
@@ -4288,8 +4305,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 
         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
                 msleep(1);
-        /* e1000e_down has a dependency on max_frame_size */
+        /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
         adapter->max_frame_size = max_frame;
+        e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+        netdev->mtu = new_mtu;
         if (netif_running(netdev))
                 e1000e_down(adapter);
 
@@ -4319,9 +4338,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
                 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
                                          + ETH_FCS_LEN;
 
-        e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
-        netdev->mtu = new_mtu;
-
         if (netif_running(netdev))
                 e1000e_up(adapter);
         else
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index f9d33ab05e9..85f955f7041 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -71,7 +71,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
 #define I82577_CFG_ASSERT_CRS_ON_TX       (1 << 15)
 #define I82577_CFG_ENABLE_DOWNSHIFT       (3 << 10) /* auto downshift 100/10 */
 #define I82577_CTRL_REG                   23
-#define I82577_CTRL_DOWNSHIFT_MASK        (7 << 10)
 
 /* 82577 specific PHY registers */
 #define I82577_PHY_CTRL_2            18
@@ -95,13 +94,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
 /* BM PHY Copper Specific Control 1 */
 #define BM_CS_CTRL1                       16
 
-/* BM PHY Copper Specific Status */
-#define BM_CS_STATUS                      17
-#define BM_CS_STATUS_LINK_UP              0x0400
-#define BM_CS_STATUS_RESOLVED             0x0800
-#define BM_CS_STATUS_SPEED_MASK           0xC000
-#define BM_CS_STATUS_SPEED_1000           0x8000
-
 #define HV_MUX_DATA_CTRL               PHY_REG(776, 16)
 #define HV_MUX_DATA_CTRL_GEN_TO_MAC    0x0400
 #define HV_MUX_DATA_CTRL_FORCE_SPEED   0x0004
@@ -563,7 +555,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
 }
 
 /**
- *  e1000_read_kmrn_reg_locked -  Read kumeran register
+ *  e1000e_read_kmrn_reg_locked -  Read kumeran register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
  *  @data: pointer to the read data
@@ -572,7 +564,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
  *  information retrieved is stored in data.
  *  Assumes semaphore already acquired.
  **/
-s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
 {
         return __e1000_read_kmrn_reg(hw, offset, data, true);
 }
@@ -631,7 +623,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
 }
 
 /**
- *  e1000_write_kmrn_reg_locked -  Write kumeran register
+ *  e1000e_write_kmrn_reg_locked -  Write kumeran register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to write to
  *  @data: data to write at register offset
@@ -639,7 +631,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
  *  Write the data to PHY register at the offset using the kumeran interface.
  *  Assumes semaphore already acquired.
  **/
-s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
 {
         return __e1000_write_kmrn_reg(hw, offset, data, true);
 }
@@ -667,15 +659,6 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
         phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
 
         ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
-        if (ret_val)
-                goto out;
-
-        /* Set number of link attempts before downshift */
-        ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data);
-        if (ret_val)
-                goto out;
-        phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
-        ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data);
 
 out:
         return ret_val;
@@ -2665,19 +2648,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
                 page = 0;
 
         if (reg > MAX_PHY_MULTI_PAGE_REG) {
-                if ((hw->phy.type != e1000_phy_82578) ||
-                    ((reg != I82578_ADDR_REG) &&
-                     (reg != I82578_ADDR_REG + 1))) {
-                        u32 phy_addr = hw->phy.addr;
+                u32 phy_addr = hw->phy.addr;
 
-                        hw->phy.addr = 1;
+                hw->phy.addr = 1;
 
-                        /* Page is shifted left, PHY expects (page x 32) */
-                        ret_val = e1000e_write_phy_reg_mdic(hw,
-                                                     IGP01E1000_PHY_PAGE_SELECT,
-                                                     (page << IGP_PAGE_SHIFT));
-                        hw->phy.addr = phy_addr;
-                }
+                /* Page is shifted left, PHY expects (page x 32) */
+                ret_val = e1000e_write_phy_reg_mdic(hw,
+                                             IGP01E1000_PHY_PAGE_SELECT,
+                                             (page << IGP_PAGE_SHIFT));
+                hw->phy.addr = phy_addr;
+
+                if (ret_val)
+                        goto out;
         }
 
         ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2685,7 +2667,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 out:
         /* Revert to MDIO fast mode, if applicable */
         if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-                ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+                ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
         if (!locked)
                 hw->phy.ops.release_phy(hw);
@@ -2791,19 +2773,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
         }
 
         if (reg > MAX_PHY_MULTI_PAGE_REG) {
-                if ((hw->phy.type != e1000_phy_82578) ||
-                    ((reg != I82578_ADDR_REG) &&
-                     (reg != I82578_ADDR_REG + 1))) {
-                        u32 phy_addr = hw->phy.addr;
+                u32 phy_addr = hw->phy.addr;
 
-                        hw->phy.addr = 1;
+                hw->phy.addr = 1;
 
-                        /* Page is shifted left, PHY expects (page x 32) */
-                        ret_val = e1000e_write_phy_reg_mdic(hw,
-                                                     IGP01E1000_PHY_PAGE_SELECT,
-                                                     (page << IGP_PAGE_SHIFT));
-                        hw->phy.addr = phy_addr;
-                }
+                /* Page is shifted left, PHY expects (page x 32) */
+                ret_val = e1000e_write_phy_reg_mdic(hw,
+                                             IGP01E1000_PHY_PAGE_SELECT,
+                                             (page << IGP_PAGE_SHIFT));
+                hw->phy.addr = phy_addr;
+
+                if (ret_val)
+                        goto out;
         }
 
         ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2812,7 +2793,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 out:
         /* Revert to MDIO fast mode, if applicable */
         if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-                ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+                ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
         if (!locked)
                 hw->phy.ops.release_phy(hw);
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index e1da4666f20..3116601dbfe 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5821,10 +5821,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
                         dev->dev_addr);
                 dev_printk(KERN_ERR, &pci_dev->dev,
                         "Please complain to your hardware vendor. Switching to a random MAC.\n");
-                dev->dev_addr[0] = 0x00;
-                dev->dev_addr[1] = 0x00;
-                dev->dev_addr[2] = 0x6c;
-                get_random_bytes(&dev->dev_addr[3], 3);
+                random_ether_addr(dev->dev_addr);
         }
 
         dprintk(KERN_DEBUG "%s: MAC Address %pM\n",
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index 6ac46486697..efbf67689ec 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -427,3 +427,4 @@ void fsl_pq_mdio_exit(void)
         of_unregister_platform_driver(&fsl_pq_mdio_driver);
 }
 module_exit(fsl_pq_mdio_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h
index d34adf99fc6..8a61b597a16 100644
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ibm_newemac/emac.h
@@ -263,8 +263,8 @@ struct emac_regs {
 
 
 /* EMACx_TRTR */
-#define EMAC_TRTR_SHIFT_EMAC4           27
-#define EMAC_TRTR_SHIFT                 24
+#define EMAC_TRTR_SHIFT_EMAC4           24
+#define EMAC_TRTR_SHIFT         27
 
 /* EMAC specific TX descriptor control fields (write access) */
 #define EMAC_TX_CTRL_GFCS               0x0200
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index cbb143ca1eb..a456578b857 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -44,6 +44,7 @@
 
 #include "ixgbe.h"
 #include "ixgbe_common.h"
+#include "ixgbe_dcb_82599.h"
 
 char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
@@ -226,6 +227,56 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
         /* tx_buffer_info must be completely set up in the transmit path */
 }
 
+/**
+ * ixgbe_tx_is_paused - check if the tx ring is paused
+ * @adapter: the ixgbe adapter
+ * @tx_ring: the corresponding tx_ring
+ *
+ * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the
+ * corresponding TC of this tx_ring when checking TFCS.
+ *
+ * Returns : true if paused
+ */
+static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter,
+                                      struct ixgbe_ring *tx_ring)
+{
+        u32 txoff = IXGBE_TFCS_TXOFF;
+
+#ifdef CONFIG_IXGBE_DCB
+        if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+                int tc;
+                int reg_idx = tx_ring->reg_idx;
+                int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
+
+                if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+                        tc = reg_idx >> 2;
+                        txoff = IXGBE_TFCS_TXOFF0;
+                } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+                        tc = 0;
+                        txoff = IXGBE_TFCS_TXOFF;
+                        if (dcb_i == 8) {
+                                /* TC0, TC1 */
+                                tc = reg_idx >> 5;
+                                if (tc == 2) /* TC2, TC3 */
+                                        tc += (reg_idx - 64) >> 4;
+                                else if (tc == 3) /* TC4, TC5, TC6, TC7 */
+                                        tc += 1 + ((reg_idx - 96) >> 3);
+                        } else if (dcb_i == 4) {
+                                /* TC0, TC1 */
+                                tc = reg_idx >> 6;
+                                if (tc == 1) {
+                                        tc += (reg_idx - 64) >> 5;
+                                        if (tc == 2) /* TC2, TC3 */
+                                                tc += (reg_idx - 96) >> 4;
+                                }
+                        }
+                }
+                txoff <<= tc;
+        }
+#endif
+        return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff;
+}
+
 static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
                                        struct ixgbe_ring *tx_ring,
                                        unsigned int eop)
@@ -237,7 +288,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
         adapter->detect_tx_hung = false;
         if (tx_ring->tx_buffer_info[eop].time_stamp &&
             time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) &&
-            !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) {
+            !ixgbe_tx_is_paused(adapter, tx_ring)) {
                 /* detected Tx unit hang */
                 union ixgbe_adv_tx_desc *tx_desc;
                 tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
@@ -412,19 +463,23 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
         u32 txctrl;
         int cpu = get_cpu();
         int q = tx_ring - adapter->tx_ring;
+        struct ixgbe_hw *hw = &adapter->hw;
 
         if (tx_ring->cpu != cpu) {
-                txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q));
                 if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+                        txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q));
                         txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
                         txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+                        txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+                        IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl);
                 } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+                        txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q));
                         txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
                         txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
-                                   IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+                                  IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+                        txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+                        IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl);
                 }
-                txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
-                IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl);
                 tx_ring->cpu = cpu;
         }
         put_cpu();
@@ -1913,11 +1968,25 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
                         break;
                 }
         }
+
         if (hw->mac.type == ixgbe_mac_82599EB) {
+                u32 rttdcs;
+
+                /* disable the arbiter while setting MTQC */
+                rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+                rttdcs |= IXGBE_RTTDCS_ARBDIS;
+                IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+
                 /* We enable 8 traffic classes, DCB only */
                 if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
                         IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA |
                                         IXGBE_MTQC_8TC_8TQ));
+                else
+                        IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB);
+
+                /* re-eable the arbiter */
+                rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
+                IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
         }
 }
 
@@ -2471,7 +2540,10 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter)
         ixgbe_restore_vlan(adapter);
 #ifdef CONFIG_IXGBE_DCB
         if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-                netif_set_gso_max_size(netdev, 32768);
+                if (hw->mac.type == ixgbe_mac_82598EB)
+                        netif_set_gso_max_size(netdev, 32768);
+                else
+                        netif_set_gso_max_size(netdev, 65536);
                 ixgbe_configure_dcb(adapter);
         } else {
                 netif_set_gso_max_size(netdev, 65536);
@@ -5922,6 +5994,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
         } else {
                 pci_set_master(pdev);
                 pci_restore_state(pdev);
+                pci_save_state(pdev);
 
                 pci_wake_from_d3(pdev, false);
 
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index 0be14d702be..c146304d8d6 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -568,6 +568,16 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
                 iowrite16(*wptr++, ks->hw_addr);
 }
 
+static void ks_disable_int(struct ks_net *ks)
+{
+        ks_wrreg16(ks, KS_IER, 0x0000);
+}  /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+        ks_wrreg16(ks, KS_IER, ks->rc_ier);
+}  /* ks_enable_int */
+
 /**
  * ks_tx_fifo_space - return the available hardware buffer size.
  * @ks: The chip information
@@ -681,6 +691,47 @@ static void ks_soft_reset(struct ks_net *ks, unsigned op)
 }
 
 
+void ks_enable_qmu(struct ks_net *ks)
+{
+        u16 w;
+
+        w = ks_rdreg16(ks, KS_TXCR);
+        /* Enables QMU Transmit (TXCR). */
+        ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+        /*
+         * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+         * Enable
+         */
+
+        w = ks_rdreg16(ks, KS_RXQCR);
+        ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+        /* Enables QMU Receive (RXCR1). */
+        w = ks_rdreg16(ks, KS_RXCR1);
+        ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+        ks->enabled = true;
+}  /* ks_enable_qmu */
+
+static void ks_disable_qmu(struct ks_net *ks)
+{
+        u16     w;
+
+        w = ks_rdreg16(ks, KS_TXCR);
+
+        /* Disables QMU Transmit (TXCR). */
+        w  &= ~TXCR_TXE;
+        ks_wrreg16(ks, KS_TXCR, w);
+
+        /* Disables QMU Receive (RXCR1). */
+        w = ks_rdreg16(ks, KS_RXCR1);
+        w &= ~RXCR1_RXE ;
+        ks_wrreg16(ks, KS_RXCR1, w);
+
+        ks->enabled = false;
+
+}  /* ks_disable_qmu */
+
 /**
  * ks_read_qmu - read 1 pkt data from the QMU.
  * @ks: The chip information
@@ -752,7 +803,7 @@ static void ks_rcv(struct ks_net *ks, struct net_device *netdev)
                         (frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
                         skb_reserve(skb, 2);
                         /* read data block including CRC 4 bytes */
-                        ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4);
+                        ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len);
                         skb_put(skb, frame_hdr->len);
                         skb->dev = netdev;
                         skb->protocol = eth_type_trans(skb, netdev);
@@ -861,7 +912,7 @@ static int ks_net_open(struct net_device *netdev)
                 ks_dbg(ks, "%s - entry\n", __func__);
 
         /* reset the HW */
-        err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks);
+        err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
 
         if (err) {
                 printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
@@ -869,6 +920,15 @@ static int ks_net_open(struct net_device *netdev)
                 return err;
         }
 
+        /* wake up powermode to normal mode */
+        ks_set_powermode(ks, PMECR_PM_NORMAL);
+        mdelay(1);      /* wait for normal mode to take effect */
+
+        ks_wrreg16(ks, KS_ISR, 0xffff);
+        ks_enable_int(ks);
+        ks_enable_qmu(ks);
+        netif_start_queue(ks->netdev);
+
         if (netif_msg_ifup(ks))
                 ks_dbg(ks, "network device %s up\n", netdev->name);
 
@@ -892,19 +952,14 @@ static int ks_net_stop(struct net_device *netdev)
 
         netif_stop_queue(netdev);
 
-        kfree(ks->frame_head_info);
-
         mutex_lock(&ks->lock);
 
         /* turn off the IRQs and ack any outstanding */
         ks_wrreg16(ks, KS_IER, 0x0000);
         ks_wrreg16(ks, KS_ISR, 0xffff);
 
-        /* shutdown RX process */
-        ks_wrreg16(ks, KS_RXCR1, 0x0000);
-
-        /* shutdown TX process */
-        ks_wrreg16(ks, KS_TXCR, 0x0000);
+        /* shutdown RX/TX QMU */
+        ks_disable_qmu(ks);
 
         /* set powermode to soft power down to save power */
         ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
@@ -929,17 +984,8 @@ static int ks_net_stop(struct net_device *netdev)
  */
 static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
 {
-        unsigned fid = ks->fid;
-
-        fid = ks->fid;
-        ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK;
-
-        /* reduce the tx interrupt occurrances. */
-        if (!fid)
-                fid |= TXFR_TXIC;       /* irq on completion */
-
         /* start header at txb[0] to align txw entries */
-        ks->txh.txw[0] = cpu_to_le16(fid);
+        ks->txh.txw[0] = 0;
         ks->txh.txw[1] = cpu_to_le16(len);
 
         /* 1. set sudo-DMA mode */
@@ -957,16 +1003,6 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
                 ;
 }
 
-static void ks_disable_int(struct ks_net *ks)
-{
-        ks_wrreg16(ks, KS_IER, 0x0000);
-}  /* ks_disable_int */
-
-static void ks_enable_int(struct ks_net *ks)
-{
-        ks_wrreg16(ks, KS_IER, ks->rc_ier);
-}  /* ks_enable_int */
-
 /**
  * ks_start_xmit - transmit packet
  * @skb         : The buffer to transmit
@@ -1410,25 +1446,6 @@ static int ks_read_selftest(struct ks_net *ks)
         return ret;
 }
 
-static void ks_disable(struct ks_net *ks)
-{
-        u16     w;
-
-        w = ks_rdreg16(ks, KS_TXCR);
-
-        /* Disables QMU Transmit (TXCR). */
-        w  &= ~TXCR_TXE;
-        ks_wrreg16(ks, KS_TXCR, w);
-
-        /* Disables QMU Receive (RXCR1). */
-        w = ks_rdreg16(ks, KS_RXCR1);
-        w &= ~RXCR1_RXE ;
-        ks_wrreg16(ks, KS_RXCR1, w);
-
-        ks->enabled = false;
-
-}  /* ks_disable */
-
 static void ks_setup(struct ks_net *ks)
 {
         u16     w;
@@ -1463,7 +1480,7 @@ static void ks_setup(struct ks_net *ks)
         w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP;
         ks_wrreg16(ks, KS_TXCR, w);
 
-        w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE;
+        w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC;
 
         if (ks->promiscuous)         /* bPromiscuous */
                 w |= (RXCR1_RXAE | RXCR1_RXINVF);
@@ -1486,28 +1503,6 @@ static void ks_setup_int(struct ks_net *ks)
         ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
 }  /* ks_setup_int */
 
-void ks_enable(struct ks_net *ks)
-{
-        u16 w;
-
-        w = ks_rdreg16(ks, KS_TXCR);
-        /* Enables QMU Transmit (TXCR). */
-        ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
-
-        /*
-         * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
-         * Enable
-         */
-
-        w = ks_rdreg16(ks, KS_RXQCR);
-        ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
-
-        /* Enables QMU Receive (RXCR1). */
-        w = ks_rdreg16(ks, KS_RXCR1);
-        ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
-        ks->enabled = true;
-}  /* ks_enable */
-
 static int ks_hw_init(struct ks_net *ks)
 {
 #define MHEADER_SIZE    (sizeof(struct type_frame_head) * MAX_RECV_FRAMES)
@@ -1612,11 +1607,9 @@ static int __devinit ks8851_probe(struct platform_device *pdev)
 
         ks_soft_reset(ks, GRR_GSR);
         ks_hw_init(ks);
-        ks_disable(ks);
+        ks_disable_qmu(ks);
         ks_setup(ks);
         ks_setup_int(ks);
-        ks_enable_int(ks);
-        ks_enable(ks);
         memcpy(netdev->dev_addr, ks->mac_addr, 6);
 
         data = ks_rdreg16(ks, KS_OBCR);
@@ -1658,6 +1651,7 @@ static int __devexit ks8851_remove(struct platform_device *pdev)
         struct ks_net *ks = netdev_priv(netdev);
         struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
+        kfree(ks->frame_head_info);
         unregister_netdev(netdev);
         iounmap(ks->hw_addr);
         free_netdev(netdev);
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index 61eabcac734..b3d7d8d77f4 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -223,69 +223,73 @@ static int __devinit macsonic_init(struct net_device *dev)
         return 0;
 }
 
-static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \
+                          memcmp(mac, "\x00\xA0\x40", 3) && \
+                          memcmp(mac, "\x00\x80\x19", 3) && \
+                          memcmp(mac, "\x00\x05\x02", 3))
+
+static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
 {
         struct sonic_local *lp = netdev_priv(dev);
         const int prom_addr = ONBOARD_SONIC_PROM_BASE;
-        int i;
+        unsigned short val;
 
-        /* On NuBus boards we can sometimes look in the ROM resources.
-           No such luck for comm-slot/onboard. */
-        for(i = 0; i < 6; i++)
-                dev->dev_addr[i] = SONIC_READ_PROM(i);
+        /*
+         * On NuBus boards we can sometimes look in the ROM resources.
+         * No such luck for comm-slot/onboard.
+         * On the PowerBook 520, the PROM base address is a mystery.
+         */
+        if (hwreg_present((void *)prom_addr)) {
+                int i;
+
+                for (i = 0; i < 6; i++)
+                        dev->dev_addr[i] = SONIC_READ_PROM(i);
+                if (!INVALID_MAC(dev->dev_addr))
+                        return;
 
-        /* Most of the time, the address is bit-reversed.  The NetBSD
-           source has a rather long and detailed historical account of
-           why this is so. */
-        if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
-            memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
-            memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
-            memcmp(dev->dev_addr, "\x00\x05\x02", 3))
+                /*
+                 * Most of the time, the address is bit-reversed. The NetBSD
+                 * source has a rather long and detailed historical account of
+                 * why this is so.
+                 */
                 bit_reverse_addr(dev->dev_addr);
-        else
-                return 0;
-
-        /* If we still have what seems to be a bogus address, we'll
-           look in the CAM.  The top entry should be ours. */
-        /* Danger! This only works if MacOS has already initialized
-           the card... */
-        if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
-            memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
-            memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
-            memcmp(dev->dev_addr, "\x00\x05\x02", 3))
-        {
-                unsigned short val;
-
-                printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n");
-
-                SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
-                SONIC_WRITE(SONIC_CEP, 15);
-
-                val = SONIC_READ(SONIC_CAP2);
-                dev->dev_addr[5] = val >> 8;
-                dev->dev_addr[4] = val & 0xff;
-                val = SONIC_READ(SONIC_CAP1);
-                dev->dev_addr[3] = val >> 8;
-                dev->dev_addr[2] = val & 0xff;
-                val = SONIC_READ(SONIC_CAP0);
-                dev->dev_addr[1] = val >> 8;
-                dev->dev_addr[0] = val & 0xff;
-
-                printk(KERN_INFO "HW Address from CAM 15: %pM\n",
-                       dev->dev_addr);
-        } else return 0;
-
-        if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
-            memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
-            memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
-            memcmp(dev->dev_addr, "\x00\x05\x02", 3))
-        {
+                if (!INVALID_MAC(dev->dev_addr))
+                        return;
+
                 /*
-                 * Still nonsense ... messed up someplace!
+                 * If we still have what seems to be a bogus address, we'll
+                 * look in the CAM. The top entry should be ours.
                  */
-                printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n");
-                return -EIO;
-        } else return 0;
+                printk(KERN_WARNING "macsonic: MAC address in PROM seems "
+                                    "to be invalid, trying CAM\n");
+        } else {
+                printk(KERN_WARNING "macsonic: cannot read MAC address from "
+                                    "PROM, trying CAM\n");
+        }
+
+        /* This only works if MacOS has already initialized the card. */
+
+        SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+        SONIC_WRITE(SONIC_CEP, 15);
+
+        val = SONIC_READ(SONIC_CAP2);
+        dev->dev_addr[5] = val >> 8;
+        dev->dev_addr[4] = val & 0xff;
+        val = SONIC_READ(SONIC_CAP1);
+        dev->dev_addr[3] = val >> 8;
+        dev->dev_addr[2] = val & 0xff;
+        val = SONIC_READ(SONIC_CAP0);
+        dev->dev_addr[1] = val >> 8;
+        dev->dev_addr[0] = val & 0xff;
+
+        if (!INVALID_MAC(dev->dev_addr))
+                return;
+
+        /* Still nonsense ... messed up someplace! */
+
+        printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
+                            "seems invalid, will use a random MAC\n");
+        random_ether_addr(dev->dev_addr);
 }
 
 static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
@@ -402,8 +406,7 @@ static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
         SONIC_WRITE(SONIC_ISR, 0x7fff);
 
         /* Now look for the MAC address. */
-        if (mac_onboard_sonic_ethernet_addr(dev) != 0)
-                return -ENODEV;
+        mac_onboard_sonic_ethernet_addr(dev);
 
         /* Shared init code */
         return macsonic_init(dev);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 3aabfd9dd21..2490aa39804 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -360,6 +360,7 @@ static int macvlan_init(struct net_device *dev)
         dev->state              = (dev->state & ~MACVLAN_STATE_MASK) |
                                   (lowerdev->state & MACVLAN_STATE_MASK);
         dev->features           = lowerdev->features & MACVLAN_FEATURES;
+        dev->gso_max_size       = lowerdev->gso_max_size;
         dev->iflink             = lowerdev->ifindex;
         dev->hard_header_len    = lowerdev->hard_header_len;
 
@@ -596,6 +597,7 @@ static int macvlan_device_event(struct notifier_block *unused,
         case NETDEV_FEAT_CHANGE:
                 list_for_each_entry(vlan, &port->vlans, list) {
                         vlan->dev->features = dev->features & MACVLAN_FEATURES;
+                        vlan->dev->gso_max_size = dev->gso_max_size;
                         netdev_features_change(vlan->dev);
                 }
                 break;
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 7384f59df61..e1237b80287 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1163,6 +1163,8 @@ struct netxen_adapter {
         u32 int_vec_bit;
         u32 heartbit;
 
+        u8 mac_addr[ETH_ALEN];
+
         struct netxen_adapter_stats stats;
 
         struct netxen_recv_context recv_ctx;
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 1c46da63212..17bb3818d84 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -545,6 +545,8 @@ enum {
 #define NETXEN_NIU_TEST_MUX_CTL         (NETXEN_CRB_NIU + 0x00094)
 #define NETXEN_NIU_XG_PAUSE_CTL         (NETXEN_CRB_NIU + 0x00098)
 #define NETXEN_NIU_XG_PAUSE_LEVEL       (NETXEN_CRB_NIU + 0x000dc)
+#define NETXEN_NIU_FRAME_COUNT_SELECT   (NETXEN_CRB_NIU + 0x000ac)
+#define NETXEN_NIU_FRAME_COUNT          (NETXEN_CRB_NIU + 0x000b0)
 #define NETXEN_NIU_XG_SEL               (NETXEN_CRB_NIU + 0x00128)
 #define NETXEN_NIU_GB_PAUSE_CTL         (NETXEN_CRB_NIU + 0x0030c)
 
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 3185a98b091..52a3798d8d9 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -383,24 +383,51 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
 
 int netxen_p2_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 {
-        __u32 reg;
+        u32 mac_cfg;
+        u32 cnt = 0;
+        __u32 reg = 0x0200;
         u32 port = adapter->physical_port;
+        u16 board_type = adapter->ahw.board_type;
 
         if (port > NETXEN_NIU_MAX_XG_PORTS)
                 return -EINVAL;
 
-        reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
-        if (mode == NETXEN_NIU_PROMISC_MODE)
-                reg = (reg | 0x2000UL);
-        else
-                reg = (reg & ~0x2000UL);
+        mac_cfg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port));
+        mac_cfg &= ~0x4;
+        NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg);
 
-        if (mode == NETXEN_NIU_ALLMULTI_MODE)
-                reg = (reg | 0x1000UL);
-        else
-                reg = (reg & ~0x1000UL);
+        if ((board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) ||
+                        (board_type == NETXEN_BRDTYPE_P2_SB31_10G_HMEZ))
+                reg = (0x20 << port);
+
+        NXWR32(adapter, NETXEN_NIU_FRAME_COUNT_SELECT, reg);
+
+        mdelay(10);
+
+        while (NXRD32(adapter, NETXEN_NIU_FRAME_COUNT) && ++cnt < 20)
+                mdelay(10);
+
+        if (cnt < 20) {
+
+                reg = NXRD32(adapter,
+                        NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
+
+                if (mode == NETXEN_NIU_PROMISC_MODE)
+                        reg = (reg | 0x2000UL);
+                else
+                        reg = (reg & ~0x2000UL);
+
+                if (mode == NETXEN_NIU_ALLMULTI_MODE)
+                        reg = (reg | 0x1000UL);
+                else
+                        reg = (reg & ~0x1000UL);
+
+                NXWR32(adapter,
+                        NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+        }
 
-        NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+        mac_cfg |= 0x4;
+        NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg);
 
         return 0;
 }
@@ -436,7 +463,7 @@ netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter)
 {
         u32     val = 0;
         u16 port = adapter->physical_port;
-        u8 *addr = adapter->netdev->dev_addr;
+        u8 *addr = adapter->mac_addr;
 
         if (adapter->mc_enabled)
                 return 0;
@@ -465,7 +492,7 @@ netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter)
 {
         u32     val = 0;
         u16 port = adapter->physical_port;
-        u8 *addr = adapter->netdev->dev_addr;
+        u8 *addr = adapter->mac_addr;
 
         if (!adapter->mc_enabled)
                 return 0;
@@ -660,7 +687,7 @@ void netxen_p3_nic_set_multi(struct net_device *netdev)
 
         list_splice_tail_init(&adapter->mac_list, &del_list);
 
-        nx_p3_nic_add_mac(adapter, netdev->dev_addr, &del_list);
+        nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list);
         nx_p3_nic_add_mac(adapter, bcast_addr, &del_list);
 
         if (netdev->flags & IFF_PROMISC) {
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index e40b914d6fa..8a0904368e0 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -544,6 +544,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
                                 continue;
                         if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
                                 continue;
+                        if ((off & 0x0ff00000) == NETXEN_CRB_DDR_NET)
+                                continue;
                         if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
                                 buf[i].data = 0x1020;
                         /* skip the function enable register */
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 0b4a56a8c8d..3bf78dbfbf0 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -437,6 +437,7 @@ netxen_read_mac_addr(struct netxen_adapter *adapter)
                 netdev->dev_addr[i] = *(p + 5 - i);
 
         memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+        memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len);
 
         /* set station address */
 
@@ -459,6 +460,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p)
                 netxen_napi_disable(adapter);
         }
 
+        memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len);
         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
         adapter->macaddr_set(adapter, addr->sa_data);
 
@@ -956,7 +958,7 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
                 return err;
         }
         if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
-                adapter->macaddr_set(adapter, netdev->dev_addr);
+                adapter->macaddr_set(adapter, adapter->mac_addr);
 
         adapter->set_multi(netdev);
         adapter->set_mtu(adapter, netdev->mtu);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index bd3447f0490..94c9ad2746b 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1760,7 +1760,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
         PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
         PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
         PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
-        PCMCIA_DEVICE_CIS_PROD_ID12("PMX   ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
+        PCMCIA_DEVICE_CIS_PROD_ID12("PMX   ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
         PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
         PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
         PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 8659d341e76..35897134a5d 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -139,7 +139,7 @@ out:
         return NULL;
 }
 
-static void __devinit mdio_gpio_bus_deinit(struct device *dev)
+static void mdio_gpio_bus_deinit(struct device *dev)
 {
         struct mii_bus *bus = dev_get_drvdata(dev);
         struct mdio_gpio_info *bitbang = bus->priv;
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 9bf2a6be903..965adb6174c 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1944,8 +1944,15 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
         }
 
         /* Pull completed packets off the queue and receive them. */
-        while ((skb = ppp_mp_reconstruct(ppp)))
-                ppp_receive_nonmp_frame(ppp, skb);
+        while ((skb = ppp_mp_reconstruct(ppp))) {
+                if (pskb_may_pull(skb, 2))
+                        ppp_receive_nonmp_frame(ppp, skb);
+                else {
+                        ++ppp->dev->stats.rx_length_errors;
+                        kfree_skb(skb);
+                        ppp_receive_error(ppp);
+                }
+        }
 
         return;
 
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index cea7531f4f4..a2fc70a0d0c 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3916,6 +3916,8 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
                 goto err_out;
         }
 
+        /* Set PCIe reset type for EEH to fundamental. */
+        pdev->needs_freset = 1;
         pci_save_state(pdev);
         qdev->reg_base =
             ioremap_nocache(pci_resource_start(pdev, 1),
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index bcf13c96f73..aec05f26610 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -499,7 +499,7 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
                 /* Wait for the interrupt to come in. */
                 status = ql_wait_mbx_cmd_cmplt(qdev);
                 if (status)
-                        goto end;
+                        continue;
 
                 /* Process the event.  If it's an AEN, it
                  * will be handled in-line or a worker
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 7dfcb58b0eb..8b14c6eda7c 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -1085,7 +1085,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
         int bar = 0;
         u16 *adrp;
 
-        printk(KERN_INFO "%s\n", version);
+        printk("%s\n", version);
 
         err = pci_enable_device(pdev);
         if (err)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index f98ef523f52..0fe2fc90f20 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3235,6 +3235,10 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
         flush_scheduled_work();
 
         unregister_netdev(dev);
+
+        /* restore original MAC address */
+        rtl_rar_set(tp, dev->perm_addr);
+
         rtl_disable_msi(pdev, tp);
         rtl8169_release_board(pdev, dev, tp->mmio_addr);
         pci_set_drvdata(pdev, NULL);
@@ -3243,9 +3247,9 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
                                   struct net_device *dev)
 {
-        unsigned int mtu = dev->mtu;
+        unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
 
-        tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE;
+        tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE;
 }
 
 static int rtl8169_open(struct net_device *dev)
@@ -3379,7 +3383,7 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
 static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
 {
         /* Low hurts. Let's disable the filtering. */
-        RTL_W16(RxMaxSize, rx_buf_sz);
+        RTL_W16(RxMaxSize, rx_buf_sz + 1);
 }
 
 static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
@@ -4881,6 +4885,9 @@ static void rtl_shutdown(struct pci_dev *pdev)
 
         rtl8169_net_suspend(dev);
 
+        /* restore original MAC address */
+        rtl_rar_set(tp, dev->perm_addr);
+
         spin_lock_irq(&tp->lock);
 
         rtl8169_asic_down(ioaddr);
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index ddccf5fa56b..0dd7839322b 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3494,6 +3494,7 @@ static void s2io_reset(struct s2io_nic *sp)
 
                 /* Restore the PCI state saved during initialization. */
                 pci_restore_state(sp->pdev);
+                pci_save_state(sp->pdev);
                 pci_read_config_word(sp->pdev, 0x2, &val16);
                 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
                         break;
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index cee00ad49b5..49eb91b5f50 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx)
         efx_oword_t reg;
 
         /* GPIO 3 and the GPIO register are shared with I2C, so block that */
-        mutex_lock(&efx->i2c_adap.bus_lock);
+        i2c_lock_adapter(&efx->i2c_adap);
 
         /* Pull RST_N (GPIO 2) low then let it up again, setting the
          * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
@@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx)
         falcon_write(efx, &reg, GPIO_CTL_REG_KER);
         msleep(1);
 
-        mutex_unlock(&efx->i2c_adap.bus_lock);
+        i2c_unlock_adapter(&efx->i2c_adap);
 
         ssleep(1);
         return 0;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2ab5c39f33c..6a10d7ba587 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -4538,6 +4538,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
                 goto err_out_free_netdev;
         }
 
+        netif_carrier_off(dev);
+
         netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
 
         err = request_irq(pdev->irq, sky2_intr,
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 05c91ee6921..f12206bdbb7 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2283,7 +2283,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev)
 
         ndev->irq = ires->start;
 
-        if (ires->flags & IRQF_TRIGGER_MASK)
+        if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK)
                 irq_flags = ires->flags & IRQF_TRIGGER_MASK;
 
         ret = smc_request_attrib(pdev, ndev);
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index ccdd196f529..f9cdcbcb77d 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -986,7 +986,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget)
         struct net_device *dev = pdata->dev;
         int npackets = 0;
 
-        while (likely(netif_running(dev)) && (npackets < budget)) {
+        while (npackets < budget) {
                 unsigned int pktlength;
                 unsigned int pktwords;
                 struct sk_buff *skb;
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index b4909a2dec6..0f790927623 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -252,6 +252,9 @@ static int smsc9420_ethtool_get_settings(struct net_device *dev,
 {
         struct smsc9420_pdata *pd = netdev_priv(dev);
 
+        if (!pd->phy_dev)
+                return -ENODEV;
+
         cmd->maxtxpkt = 1;
         cmd->maxrxpkt = 1;
         return phy_ethtool_gset(pd->phy_dev, cmd);
@@ -262,6 +265,9 @@ static int smsc9420_ethtool_set_settings(struct net_device *dev,
 {
         struct smsc9420_pdata *pd = netdev_priv(dev);
 
+        if (!pd->phy_dev)
+                return -ENODEV;
+
         return phy_ethtool_sset(pd->phy_dev, cmd);
 }
 
@@ -290,6 +296,10 @@ static void smsc9420_ethtool_set_msglevel(struct net_device *netdev, u32 data)
 static int smsc9420_ethtool_nway_reset(struct net_device *netdev)
 {
         struct smsc9420_pdata *pd = netdev_priv(netdev);
+
+        if (!pd->phy_dev)
+                return -ENODEV;
+
         return phy_start_aneg(pd->phy_dev);
 }
 
@@ -312,6 +322,10 @@ smsc9420_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs,
         for (i = 0; i < 0x100; i += (sizeof(u32)))
                 data[j++] = smsc9420_reg_read(pd, i);
 
+        // cannot read phy registers if the net device is down
+        if (!phy_dev)
+                return;
+
         for (i = 0; i <= 31; i++)
                 data[j++] = smsc9420_mii_read(phy_dev->bus, phy_dev->addr, i);
 }
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index c2f14dc9ba2..9542995ba66 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -416,13 +416,8 @@ static void init_dma_desc_rings(struct net_device *dev)
         unsigned int txsize = priv->dma_tx_size;
         unsigned int rxsize = priv->dma_rx_size;
         unsigned int bfsize = priv->dma_buf_sz;
-        int buff2_needed = 0;
-        int dis_ic = 0;
+        int buff2_needed = 0, dis_ic = 0;
 
-#ifdef CONFIG_STMMAC_TIMER
-        /* Using Timers disable interrupts on completion for the reception */
-        dis_ic = 1;
-#endif
         /* Set the Buffer size according to the MTU;
          * indeed, in case of jumbo we need to bump-up the buffer sizes.
          */
@@ -437,6 +432,11 @@ static void init_dma_desc_rings(struct net_device *dev)
         else
                 bfsize = DMA_BUFFER_SIZE;
 
+#ifdef CONFIG_STMMAC_TIMER
+        /* Disable interrupts on completion for the reception if timer is on */
+        if (likely(priv->tm->enable))
+                dis_ic = 1;
+#endif
         /* If the MTU exceeds 8k so use the second buffer in the chain */
         if (bfsize >= BUF_SIZE_8KiB)
                 buff2_needed = 1;
@@ -809,20 +809,22 @@ static void stmmac_tx(struct stmmac_priv *priv)
 
 static inline void stmmac_enable_irq(struct stmmac_priv *priv)
 {
-#ifndef CONFIG_STMMAC_TIMER
-        writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
-#else
-        priv->tm->timer_start(tmrate);
+#ifdef CONFIG_STMMAC_TIMER
+        if (likely(priv->tm->enable))
+                priv->tm->timer_start(tmrate);
+        else
 #endif
+        writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
 }
 
 static inline void stmmac_disable_irq(struct stmmac_priv *priv)
 {
-#ifndef CONFIG_STMMAC_TIMER
-        writel(0, priv->dev->base_addr + DMA_INTR_ENA);
-#else
-        priv->tm->timer_stop();
+#ifdef CONFIG_STMMAC_TIMER
+        if (likely(priv->tm->enable))
+                priv->tm->timer_stop();
+        else
 #endif
+        writel(0, priv->dev->base_addr + DMA_INTR_ENA);
 }
 
 static int stmmac_has_work(struct stmmac_priv *priv)
@@ -1031,22 +1033,23 @@ static int stmmac_open(struct net_device *dev)
         }
 
 #ifdef CONFIG_STMMAC_TIMER
-        priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
+        priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
         if (unlikely(priv->tm == NULL)) {
                 pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
                 return -ENOMEM;
         }
         priv->tm->freq = tmrate;
 
-        /* Test if the HW timer can be actually used.
-         * In case of failure continue with no timer. */
+        /* Test if the external timer can be actually used.
+         * In case of failure continue without timer. */
         if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
-                pr_warning("stmmaceth: cannot attach the HW timer\n");
+                pr_warning("stmmaceth: cannot attach the external timer.\n");
                 tmrate = 0;
                 priv->tm->freq = 0;
                 priv->tm->timer_start = stmmac_no_timer_started;
                 priv->tm->timer_stop = stmmac_no_timer_stopped;
-        }
+        } else
+                priv->tm->enable = 1;
 #endif
 
         /* Create and initialize the TX/RX descriptors chains. */
@@ -1322,9 +1325,11 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
         /* Interrupt on completition only for the latest segment */
         priv->mac_type->ops->close_tx_desc(desc);
+
 #ifdef CONFIG_STMMAC_TIMER
-        /* Clean IC while using timers */
-        priv->mac_type->ops->clear_tx_ic(desc);
+        /* Clean IC while using timer */
+        if (likely(priv->tm->enable))
+                priv->mac_type->ops->clear_tx_ic(desc);
 #endif
         /* To avoid raise condition */
         priv->mac_type->ops->set_tx_owner(first);
@@ -2028,7 +2033,8 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
 
 #ifdef CONFIG_STMMAC_TIMER
                 priv->tm->timer_stop();
-                dis_ic = 1;
+                if (likely(priv->tm->enable))
+                        dis_ic = 1;
 #endif
                 napi_disable(&priv->napi);
 
diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c
index b838c658207..679f61ffb1f 100644
--- a/drivers/net/stmmac/stmmac_timer.c
+++ b/drivers/net/stmmac/stmmac_timer.c
@@ -63,7 +63,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
 
         stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
         if (stmmac_rtc == NULL) {
-                pr_error("open rtc device failed\n");
+                pr_err("open rtc device failed\n");
                 return -ENODEV;
         }
 
@@ -71,7 +71,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
 
         /* Periodic mode is not supported */
         if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) {
-                pr_error("set periodic failed\n");
+                pr_err("set periodic failed\n");
                 rtc_irq_unregister(stmmac_rtc, &stmmac_task);
                 rtc_class_close(stmmac_rtc);
                 return -1;
diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h
index f795cae3372..6863590d184 100644
--- a/drivers/net/stmmac/stmmac_timer.h
+++ b/drivers/net/stmmac/stmmac_timer.h
@@ -26,6 +26,7 @@ struct stmmac_timer {
         void (*timer_start) (unsigned int new_freq);
         void (*timer_stop) (void);
         unsigned int freq;
+        unsigned int enable;
 };
 
 /* Open the HW timer device and return 0 in case of success */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 7019a0d1a82..61640b99b70 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -2063,7 +2063,15 @@ static int gem_check_invariants(struct gem *gp)
                 mif_cfg &= ~MIF_CFG_PSELECT;
                 writel(mif_cfg, gp->regs + MIF_CFG);
         } else {
-                gp->phy_type = phy_serialink;
+#ifdef CONFIG_SPARC
+                const char *p;
+
+                p = of_get_property(gp->of_node, "shared-pins", NULL);
+                if (p && !strcmp(p, "serdes"))
+                        gp->phy_type = phy_serdes;
+                else
+#endif
+                        gp->phy_type = phy_serialink;
         }
         if (gp->phy_type == phy_mii_mdio1 ||
             gp->phy_type == phy_mii_mdio0) {
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 36cb2423bcf..75fa32e34fd 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -1144,9 +1144,16 @@ static void dir_open_adapter (struct net_device *dev)
                 } else {
                         char **prphase = printphase;
                         char **prerror = printerror;
+                        int pnr = err / 16 - 1;
+                        int enr = err % 16 - 1;
                         DPRINTK("TR Adapter misc open failure, error code = ");
-                        printk("0x%x, Phase: %s, Error: %s\n",
-                                err, prphase[err/16 -1], prerror[err%16 -1]);
+                        if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) ||
+                                        enr < 0 ||
+                                        enr >= ARRAY_SIZE(printerror))
+                                printk("0x%x, invalid Phase/Error.", err);
+                        else
+                                printk("0x%x, Phase: %s, Error: %s\n", err,
+                                                prphase[pnr], prerror[enr]);
                         printk(" retrying after %ds delay...\n",
                                         TR_RETRY_INTERVAL/HZ);
                 }
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index c47237c2d63..32d93564a74 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -174,7 +174,7 @@ config USB_NET_CDCETHER
             * Ericsson Mobile Broadband Module (all variants)
             * Motorola (DM100 and SB4100)
             * Broadcom Cable Modem (reference design)
-            * Toshiba (PCX1100U and F3507g)
+            * Toshiba (PCX1100U and F3507g/F3607gw)
             * ...
 
           This driver creates an interface named "ethX", where X depends on
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 4a6aff57940..21e1ba16000 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -544,20 +544,60 @@ static const struct usb_device_id	products [] = {
                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
         .driver_info = (unsigned long) &cdc_info,
 }, {
-        /* Ericsson F3307 */
+        /* Ericsson F3607gw ver 2 */
+        USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM,
+                        USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+        .driver_info = (unsigned long) &cdc_info,
+}, {
+        /* Ericsson F3607gw ver 3 */
         USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM,
                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
         .driver_info = (unsigned long) &cdc_info,
 }, {
+        /* Ericsson F3307 */
+        USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM,
+                        USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+        .driver_info = (unsigned long) &cdc_info,
+}, {
+        /* Ericsson F3307 ver 2 */
+        USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM,
+                        USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+        .driver_info = (unsigned long) &cdc_info,
+}, {
+        /* Ericsson C3607w */
+        USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM,
+                        USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+        .driver_info = (unsigned long) &cdc_info,
+}, {
         /* Toshiba F3507g */
         USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
         .driver_info = (unsigned long) &cdc_info,
 }, {
+        /* Toshiba F3607gw */
+        USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM,
+                        USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+        .driver_info = (unsigned long) &cdc_info,
+}, {
+        /* Toshiba F3607gw ver 2 */
+        USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM,
+                        USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+        .driver_info = (unsigned long) &cdc_info,
+}, {
         /* Dell F3507g */
         USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM,
                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
         .driver_info = (unsigned long) &cdc_info,
+}, {
+        /* Dell F3607gw */
+        USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM,
+                        USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+        .driver_info = (unsigned long) &cdc_info,
+}, {
+        /* Dell F3607gw ver 2 */
+        USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM,
+                        USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+        .driver_info = (unsigned long) &cdc_info,
 },
         { },            // END
 };
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index fa4e58196c2..43bc3fcc0d8 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -378,7 +378,7 @@ static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
 }
 
 #define DUMP(buf_, len_)        \
-        dbg_dump(__LINE__, __func__, buf_, len_)
+        dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
 
 #define DUMP1(buf_, len_)                       \
         do {                                    \
@@ -1363,7 +1363,7 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
         /* reset the rts and dtr */
         /* do the actual close */
         serial->open_count--;
-        kref_put(&serial->parent->ref, hso_serial_ref_free);
+
         if (serial->open_count <= 0) {
                 serial->open_count = 0;
                 spin_lock_irq(&serial->serial_lock);
@@ -1383,6 +1383,8 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
                 usb_autopm_put_interface(serial->parent->interface);
 
         mutex_unlock(&serial->parent->mutex);
+
+        kref_put(&serial->parent->ref, hso_serial_ref_free);
 }
 
 /* close the requested serial port */
@@ -1527,7 +1529,7 @@ static void tiocmget_intr_callback(struct urb *urb)
                 dev_warn(&usb->dev,
                          "hso received invalid serial state notification\n");
                 DUMP(serial_state_notification,
-                     sizeof(hso_serial_state_notifation))
+                     sizeof(struct hso_serial_state_notification));
         } else {
 
                 UART_state_bitmap = le16_to_cpu(serial_state_notification->
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index ade5b344f75..52af5017c46 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -210,32 +210,29 @@ rx_drop:
 static struct net_device_stats *veth_get_stats(struct net_device *dev)
 {
         struct veth_priv *priv;
-        struct net_device_stats *dev_stats;
         int cpu;
-        struct veth_net_stats *stats;
+        struct veth_net_stats *stats, total = {0};
 
         priv = netdev_priv(dev);
-        dev_stats = &dev->stats;
-
-        dev_stats->rx_packets = 0;
-        dev_stats->tx_packets = 0;
-        dev_stats->rx_bytes = 0;
-        dev_stats->tx_bytes = 0;
-        dev_stats->tx_dropped = 0;
-        dev_stats->rx_dropped = 0;
 
-        for_each_online_cpu(cpu) {
+        for_each_possible_cpu(cpu) {
                 stats = per_cpu_ptr(priv->stats, cpu);
 
-                dev_stats->rx_packets += stats->rx_packets;
-                dev_stats->tx_packets += stats->tx_packets;
-                dev_stats->rx_bytes += stats->rx_bytes;
-                dev_stats->tx_bytes += stats->tx_bytes;
-                dev_stats->tx_dropped += stats->tx_dropped;
-                dev_stats->rx_dropped += stats->rx_dropped;
+                total.rx_packets += stats->rx_packets;
+                total.tx_packets += stats->tx_packets;
+                total.rx_bytes   += stats->rx_bytes;
+                total.tx_bytes   += stats->tx_bytes;
+                total.tx_dropped += stats->tx_dropped;
+                total.rx_dropped += stats->rx_dropped;
         }
-
-        return dev_stats;
+        dev->stats.rx_packets = total.rx_packets;
+        dev->stats.tx_packets = total.tx_packets;
+        dev->stats.rx_bytes   = total.rx_bytes;
+        dev->stats.tx_bytes   = total.tx_bytes;
+        dev->stats.tx_dropped = total.tx_dropped;
+        dev->stats.rx_dropped = total.rx_dropped;
+
+        return &dev->stats;
 }
 
 static int veth_open(struct net_device *dev)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 05630f2f693..b9e002fccbc 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -998,7 +998,7 @@ static unsigned int features[] = {
         VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
 };
 
-static struct virtio_driver virtio_net = {
+static struct virtio_driver virtio_net_driver = {
         .feature_table = features,
         .feature_table_size = ARRAY_SIZE(features),
         .driver.name =  KBUILD_MODNAME,
@@ -1011,12 +1011,12 @@ static struct virtio_driver virtio_net = {
 
 static int __init init(void)
 {
-        return register_virtio_driver(&virtio_net);
+        return register_virtio_driver(&virtio_net_driver);
 }
 
 static void __exit fini(void)
 {
-        unregister_virtio_driver(&virtio_net);
+        unregister_virtio_driver(&virtio_net_driver);
 }
 module_init(init);
 module_exit(fini);
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index e2c33c06190..8e25ca7080c 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -907,6 +907,7 @@ static ssize_t cosa_write(struct file *file,
                         current->state = TASK_RUNNING;
                         chan->tx_status = 1;
                         spin_unlock_irqrestore(&cosa->lock, flags);
+                        up(&chan->wsem);
                         return -ERESTARTSYS;
                 }
         }
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 9c6ab5378f6..95a8e232b58 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1125,7 +1125,6 @@ ath5k_mode_setup(struct ath5k_softc *sc)
         /* configure operational mode */
         ath5k_hw_set_opmode(ah);
 
-        ath5k_hw_set_mcast_filter(ah, 0, 0);
         ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
 }
 
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index b767c3b67b2..b548c8eaaae 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -63,12 +63,16 @@ static const struct pci_device_id ath5k_led_devices[] = {
         { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
         /* E-machines E510 (tuliom@gmail.com) */
         { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
+        /* BenQ Joybook R55v (nowymarluk@wp.pl) */
+        { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) },
         /* Acer Extensa 5620z (nekoreeve@gmail.com) */
         { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
         /* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */
         { ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
         /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
         { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+        /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */
+        { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) },
         /* HP Compaq C700 (nitrousnrg@gmail.com) */
         { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
         /* IBM-specific AR5212 (all others) */
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 52bed89063d..43d2be9867f 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1555,6 +1555,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
                 BIT(NL80211_IFTYPE_ADHOC) |
                 BIT(NL80211_IFTYPE_MESH_POINT);
 
+        hw->wiphy->ps_default = false;
+
         hw->queues = 4;
         hw->max_rates = 4;
         hw->channel_change_time = 5000;
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 16a271787b8..1895d63aad0 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -679,7 +679,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
                 return rate;
 
         if (rate_table->info[rate].valid_single_stream &&
-            !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG));
+            !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG))
                 return rate;
 
         /* This should not happen */
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 8701034569f..de4e804bedf 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1157,8 +1157,9 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot)
 }
 
 static int dma_tx_fragment(struct b43_dmaring *ring,
-                           struct sk_buff *skb)
+                           struct sk_buff **in_skb)
 {
+        struct sk_buff *skb = *in_skb;
         const struct b43_dma_ops *ops = ring->ops;
         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
         u8 *header;
@@ -1224,8 +1225,14 @@ static int dma_tx_fragment(struct b43_dmaring *ring,
                 }
 
                 memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
+                memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb));
+                bounce_skb->dev = skb->dev;
+                skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb));
+                info = IEEE80211_SKB_CB(bounce_skb);
+
                 dev_kfree_skb_any(skb);
                 skb = bounce_skb;
+                *in_skb = bounce_skb;
                 meta->skb = skb;
                 meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
                 if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
@@ -1355,7 +1362,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
          * static, so we don't need to store it per frame. */
         ring->queue_prio = skb_get_queue_mapping(skb);
 
-        err = dma_tx_fragment(ring, skb);
+        /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing
+         * into the skb data or cb now. */
+        hdr = NULL;
+        info = NULL;
+        err = dma_tx_fragment(ring, &skb);
         if (unlikely(err == -ENOKEY)) {
                 /* Drop this packet, as we don't have the encryption key
                  * anymore and must not transmit it unencrypted. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 86f35827f00..098dda1a67c 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4521,9 +4521,8 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
 {
         struct b43_wl *wl = hw_to_b43_wl(hw);
 
-        mutex_lock(&wl->mutex);
+        /* FIXME: add locking */
         b43_update_templates(wl);
-        mutex_unlock(&wl->mutex);
 
         return 0;
 }
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 240cff1e697..6e2fc0cb6f8 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -6029,7 +6029,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
         struct ipw2100_priv *priv;
         struct net_device *dev;
 
-        dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0);
+        dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
         if (!dev)
                 return NULL;
         priv = libipw_priv(dev);
@@ -6342,7 +6342,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
                 sysfs_remove_group(&pci_dev->dev.kobj,
                                    &ipw2100_attribute_group);
 
-                free_ieee80211(dev, 0);
+                free_ieee80211(dev);
                 pci_set_drvdata(pci_dev, NULL);
         }
 
@@ -6400,7 +6400,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
                 if (dev->base_addr)
                         iounmap((void __iomem *)dev->base_addr);
 
-                free_ieee80211(dev, 0);
+                free_ieee80211(dev);
         }
 
         pci_release_regions(pci_dev);
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 827824d45de..a6ca536e44f 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -104,25 +104,6 @@ static int antenna = CFG_SYS_ANTENNA_BOTH;
 static int rtap_iface = 0;     /* def: 0 -- do not create rtap interface */
 #endif
 
-static struct ieee80211_rate ipw2200_rates[] = {
-        { .bitrate = 10 },
-        { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
-        { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
-        { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
-        { .bitrate = 60 },
-        { .bitrate = 90 },
-        { .bitrate = 120 },
-        { .bitrate = 180 },
-        { .bitrate = 240 },
-        { .bitrate = 360 },
-        { .bitrate = 480 },
-        { .bitrate = 540 }
-};
-
-#define ipw2200_a_rates         (ipw2200_rates + 4)
-#define ipw2200_num_a_rates     8
-#define ipw2200_bg_rates        (ipw2200_rates + 0)
-#define ipw2200_num_bg_rates    12
 
 #ifdef CONFIG_IPW2200_QOS
 static int qos_enable = 0;
@@ -8674,6 +8655,24 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option)
  *
  */
 
+static int ipw_wx_get_name(struct net_device *dev,
+                           struct iw_request_info *info,
+                           union iwreq_data *wrqu, char *extra)
+{
+        struct ipw_priv *priv = libipw_priv(dev);
+        mutex_lock(&priv->mutex);
+        if (priv->status & STATUS_RF_KILL_MASK)
+                strcpy(wrqu->name, "radio off");
+        else if (!(priv->status & STATUS_ASSOCIATED))
+                strcpy(wrqu->name, "unassociated");
+        else
+                snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c",
+                         ipw_modes[priv->assoc_request.ieee_mode]);
+        IPW_DEBUG_WX("Name: %s\n", wrqu->name);
+        mutex_unlock(&priv->mutex);
+        return 0;
+}
+
 static int ipw_set_channel(struct ipw_priv *priv, u8 channel)
 {
         if (channel == 0) {
@@ -9973,7 +9972,7 @@ static int ipw_wx_sw_reset(struct net_device *dev,
 /* Rebase the WE IOCTLs to zero for the handler array */
 #define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT]
 static iw_handler ipw_wx_handlers[] = {
-        IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname,
+        IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name,
         IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq,
         IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq,
         IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode,
@@ -11417,100 +11416,16 @@ static void ipw_bg_down(struct work_struct *work)
 /* Called by register_netdev() */
 static int ipw_net_init(struct net_device *dev)
 {
-        int i, rc = 0;
         struct ipw_priv *priv = libipw_priv(dev);
-        const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
-        struct wireless_dev *wdev = &priv->ieee->wdev;
         mutex_lock(&priv->mutex);
 
         if (ipw_up(priv)) {
-                rc = -EIO;
-                goto out;
-        }
-
-        memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
-
-        /* fill-out priv->ieee->bg_band */
-        if (geo->bg_channels) {
-                struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
-
-                bg_band->band = IEEE80211_BAND_2GHZ;
-                bg_band->n_channels = geo->bg_channels;
-                bg_band->channels =
-                        kzalloc(geo->bg_channels *
-                                sizeof(struct ieee80211_channel), GFP_KERNEL);
-                /* translate geo->bg to bg_band.channels */
-                for (i = 0; i < geo->bg_channels; i++) {
-                        bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
-                        bg_band->channels[i].center_freq = geo->bg[i].freq;
-                        bg_band->channels[i].hw_value = geo->bg[i].channel;
-                        bg_band->channels[i].max_power = geo->bg[i].max_power;
-                        if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
-                                bg_band->channels[i].flags |=
-                                        IEEE80211_CHAN_PASSIVE_SCAN;
-                        if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
-                                bg_band->channels[i].flags |=
-                                        IEEE80211_CHAN_NO_IBSS;
-                        if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
-                                bg_band->channels[i].flags |=
-                                        IEEE80211_CHAN_RADAR;
-                        /* No equivalent for LIBIPW_CH_80211H_RULES,
-                           LIBIPW_CH_UNIFORM_SPREADING, or
-                           LIBIPW_CH_B_ONLY... */
-                }
-                /* point at bitrate info */
-                bg_band->bitrates = ipw2200_bg_rates;
-                bg_band->n_bitrates = ipw2200_num_bg_rates;
-
-                wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
-        }
-
-        /* fill-out priv->ieee->a_band */
-        if (geo->a_channels) {
-                struct ieee80211_supported_band *a_band = &priv->ieee->a_band;
-
-                a_band->band = IEEE80211_BAND_5GHZ;
-                a_band->n_channels = geo->a_channels;
-                a_band->channels =
-                        kzalloc(geo->a_channels *
-                                sizeof(struct ieee80211_channel), GFP_KERNEL);
-                /* translate geo->bg to a_band.channels */
-                for (i = 0; i < geo->a_channels; i++) {
-                        a_band->channels[i].band = IEEE80211_BAND_2GHZ;
-                        a_band->channels[i].center_freq = geo->a[i].freq;
-                        a_band->channels[i].hw_value = geo->a[i].channel;
-                        a_band->channels[i].max_power = geo->a[i].max_power;
-                        if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY)
-                                a_band->channels[i].flags |=
-                                        IEEE80211_CHAN_PASSIVE_SCAN;
-                        if (geo->a[i].flags & LIBIPW_CH_NO_IBSS)
-                                a_band->channels[i].flags |=
-                                        IEEE80211_CHAN_NO_IBSS;
-                        if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT)
-                                a_band->channels[i].flags |=
-                                        IEEE80211_CHAN_RADAR;
-                        /* No equivalent for LIBIPW_CH_80211H_RULES,
-                           LIBIPW_CH_UNIFORM_SPREADING, or
-                           LIBIPW_CH_B_ONLY... */
-                }
-                /* point at bitrate info */
-                a_band->bitrates = ipw2200_a_rates;
-                a_band->n_bitrates = ipw2200_num_a_rates;
-
-                wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band;
-        }
-
-        set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
-
-        /* With that information in place, we can now register the wiphy... */
-        if (wiphy_register(wdev->wiphy)) {
-                rc = -EIO;
-                goto out;
+                mutex_unlock(&priv->mutex);
+                return -EIO;
         }
 
-out:
         mutex_unlock(&priv->mutex);
-        return rc;
+        return 0;
 }
 
 /* PCI driver stuff */
@@ -11641,7 +11556,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv)
         if (priv->prom_net_dev)
                 return -EPERM;
 
-        priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1);
+        priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv));
         if (priv->prom_net_dev == NULL)
                 return -ENOMEM;
 
@@ -11660,7 +11575,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv)
 
         rc = register_netdev(priv->prom_net_dev);
         if (rc) {
-                free_ieee80211(priv->prom_net_dev, 1);
+                free_ieee80211(priv->prom_net_dev);
                 priv->prom_net_dev = NULL;
                 return rc;
         }
@@ -11674,7 +11589,7 @@ static void ipw_prom_free(struct ipw_priv *priv)
                 return;
 
         unregister_netdev(priv->prom_net_dev);
-        free_ieee80211(priv->prom_net_dev, 1);
+        free_ieee80211(priv->prom_net_dev);
 
         priv->prom_net_dev = NULL;
 }
@@ -11702,7 +11617,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
         struct ipw_priv *priv;
         int i;
 
-        net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0);
+        net_dev = alloc_ieee80211(sizeof(struct ipw_priv));
         if (net_dev == NULL) {
                 err = -ENOMEM;
                 goto out;
@@ -11850,7 +11765,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
         pci_disable_device(pdev);
         pci_set_drvdata(pdev, NULL);
       out_free_ieee80211:
-        free_ieee80211(priv->net_dev, 0);
+        free_ieee80211(priv->net_dev);
       out:
         return err;
 }
@@ -11917,7 +11832,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev)
         pci_release_regions(pdev);
         pci_disable_device(pdev);
         pci_set_drvdata(pdev, NULL);
-        free_ieee80211(priv->net_dev, 0);
+        free_ieee80211(priv->net_dev);
         free_firmware();
 }
 
diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
index bf45391172f..1e334ff6bd5 100644
--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -31,7 +31,6 @@
 #include <linux/ieee80211.h>
 
 #include <net/lib80211.h>
-#include <net/cfg80211.h>
 
 #define LIBIPW_VERSION "git-1.1.13"
 
@@ -784,15 +783,12 @@ struct libipw_geo {
 
 struct libipw_device {
         struct net_device *dev;
-        struct wireless_dev wdev;
         struct libipw_security sec;
 
         /* Bookkeeping structures */
         struct libipw_stats ieee_stats;
 
         struct libipw_geo geo;
-        struct ieee80211_supported_band bg_band;
-        struct ieee80211_supported_band a_band;
 
         /* Probe / Beacon management */
         struct list_head network_free_list;
@@ -1018,8 +1014,8 @@ static inline int libipw_is_cck_rate(u8 rate)
 }
 
 /* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev, int monitor);
-extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
 extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
 
 extern void libipw_networks_age(struct libipw_device *ieee,
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index a0e9f6aed7d..eb2b60834c1 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -62,9 +62,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION);
 MODULE_AUTHOR(DRV_COPYRIGHT);
 MODULE_LICENSE("GPL");
 
-struct cfg80211_ops libipw_config_ops = { };
-void *libipw_wiphy_privid = &libipw_wiphy_privid;
-
 static int libipw_networks_allocate(struct libipw_device *ieee)
 {
         if (ieee->networks)
@@ -143,7 +140,7 @@ int libipw_change_mtu(struct net_device *dev, int new_mtu)
 }
 EXPORT_SYMBOL(libipw_change_mtu);
 
-struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
+struct net_device *alloc_ieee80211(int sizeof_priv)
 {
         struct libipw_device *ieee;
         struct net_device *dev;
@@ -160,31 +157,10 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
 
         ieee->dev = dev;
 
-        if (!monitor) {
-                ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0);
-                if (!ieee->wdev.wiphy) {
-                        LIBIPW_ERROR("Unable to allocate wiphy.\n");
-                        goto failed_free_netdev;
-                }
-
-                ieee->dev->ieee80211_ptr = &ieee->wdev;
-                ieee->wdev.iftype = NL80211_IFTYPE_STATION;
-
-                /* Fill-out wiphy structure bits we know...  Not enough info
-                   here to call set_wiphy_dev or set MAC address or channel info
-                   -- have to do that in ->ndo_init... */
-                ieee->wdev.wiphy->privid = libipw_wiphy_privid;
-
-                ieee->wdev.wiphy->max_scan_ssids = 1;
-                ieee->wdev.wiphy->max_scan_ie_len = 0;
-                ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
-                                                | BIT(NL80211_IFTYPE_ADHOC);
-        }
-
         err = libipw_networks_allocate(ieee);
         if (err) {
                 LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err);
-                goto failed_free_wiphy;
+                goto failed_free_netdev;
         }
         libipw_networks_initialize(ieee);
 
@@ -217,31 +193,19 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
 
         return dev;
 
-failed_free_wiphy:
-        if (!monitor)
-                wiphy_free(ieee->wdev.wiphy);
 failed_free_netdev:
         free_netdev(dev);
 failed:
         return NULL;
 }
 
-void free_ieee80211(struct net_device *dev, int monitor)
+void free_ieee80211(struct net_device *dev)
 {
         struct libipw_device *ieee = netdev_priv(dev);
 
         lib80211_crypt_info_free(&ieee->crypt_info);
 
         libipw_networks_free(ieee);
-
-        /* free cfg80211 resources */
-        if (!monitor) {
-                wiphy_unregister(ieee->wdev.wiphy);
-                kfree(ieee->a_band.channels);
-                kfree(ieee->bg_band.channels);
-                wiphy_free(ieee->wdev.wiphy);
-        }
-
         free_netdev(dev);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 2716b91ba9f..950267ab556 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -161,5 +161,6 @@ struct iwl_cfg iwl1000_bgn_cfg = {
         .max_ll_items = OTP_MAX_LL_ITEMS_1000,
         .shadow_ram_support = false,
         .ht_greenfield_support = true,
+        .use_rts_for_ht = true, /* use rts/cts protection */
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index c295b8ee922..1473452ba22 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -175,6 +175,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = {
         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
         .shadow_ram_support = true,
         .ht_greenfield_support = true,
+        .use_rts_for_ht = true, /* use rts/cts protection */
 };
 
 /*
@@ -198,6 +199,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
         .shadow_ram_support = true,
         .ht_greenfield_support = true,
+        .use_rts_for_ht = true, /* use rts/cts protection */
 };
 
 struct iwl_cfg iwl6050_2agn_cfg = {
@@ -218,6 +220,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
         .shadow_ram_support = true,
         .ht_greenfield_support = true,
+        .use_rts_for_ht = true, /* use rts/cts protection */
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -238,6 +241,7 @@ struct iwl_cfg iwl6000_3agn_cfg = {
         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
         .shadow_ram_support = true,
         .ht_greenfield_support = true,
+        .use_rts_for_ht = true, /* use rts/cts protection */
 };
 
 struct iwl_cfg iwl6050_3agn_cfg = {
@@ -258,6 +262,7 @@ struct iwl_cfg iwl6050_3agn_cfg = {
         .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
         .shadow_ram_support = true,
         .ht_greenfield_support = true,
+        .use_rts_for_ht = true, /* use rts/cts protection */
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 346dc06fa7b..81726ee3285 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -418,6 +418,15 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
         else if (tid == IWL_AGG_ALL_TID)
                 for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
                         rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+        if (priv->cfg->use_rts_for_ht) {
+                /*
+                 * switch to RTS/CTS if it is the prefer protection method
+                 * for HT traffic
+                 */
+                IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n");
+                priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN;
+                iwlcore_commit_rxon(priv);
+        }
 }
 
 static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index eaafae091f5..921dc4a26fe 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -116,9 +116,6 @@ int iwl_commit_rxon(struct iwl_priv *priv)
 
         /* always get timestamp with Rx frame */
         priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
-        /* allow CTS-to-self if possible. this is relevant only for
-         * 5000, but will not damage 4965 */
-        priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
 
         ret = iwl_check_rxon_cmd(priv);
         if (ret) {
@@ -218,6 +215,13 @@ int iwl_commit_rxon(struct iwl_priv *priv)
                                         "Could not send WEP static key.\n");
                 }
 
+                /*
+                 * allow CTS-to-self if possible for new association.
+                 * this is relevant only for 5000 series and up,
+                 * but will not damage 4965
+                 */
+                priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
+
                 /* Apply the new configuration
                  * RXON assoc doesn't clear the station table in uCode,
                  */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index e50103a956b..7754538c219 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -213,6 +213,7 @@ struct iwl_mod_params {
  * @pa_type: used by 6000 series only to identify the type of Power Amplifier
  * @max_ll_items: max number of OTP blocks
  * @shadow_ram_support: shadow support for OTP memory
+ * @use_rts_for_ht: use rts/cts protection for HT traffic
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -255,6 +256,7 @@ struct iwl_cfg {
         const bool shadow_ram_support;
         const bool ht_greenfield_support;
         const bool broken_powersave;
+        bool use_rts_for_ht;
 };
 
 /***************************
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index fb9bcfa6d94..b7e196e3c8d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -1277,8 +1277,16 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid)
                 return -ENXIO;
         }
 
+        if (priv->stations[sta_id].tid[tid].agg.state ==
+                                IWL_EMPTYING_HW_QUEUE_ADDBA) {
+                IWL_DEBUG_HT(priv, "AGG stop before setup done\n");
+                ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid);
+                priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
+                return 0;
+        }
+
         if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON)
-                IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n");
+                IWL_WARN(priv, "Stopping AGG while state not ON or starting\n");
 
         tid_data = &priv->stations[sta_id].tid[tid];
         ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index 039b555e4d7..53d56ab83c0 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -169,16 +169,19 @@ static int lbs_ethtool_set_wol(struct net_device *dev,
         struct lbs_private *priv = dev->ml_priv;
         uint32_t criteria = 0;
 
-        if (priv->wol_criteria == 0xffffffff && wol->wolopts)
-                return -EOPNOTSUPP;
-
         if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY))
                 return -EOPNOTSUPP;
 
-        if (wol->wolopts & WAKE_UCAST) criteria |= EHS_WAKE_ON_UNICAST_DATA;
-        if (wol->wolopts & WAKE_MCAST) criteria |= EHS_WAKE_ON_MULTICAST_DATA;
-        if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA;
-        if (wol->wolopts & WAKE_PHY)   criteria |= EHS_WAKE_ON_MAC_EVENT;
+        if (wol->wolopts & WAKE_UCAST)
+                criteria |= EHS_WAKE_ON_UNICAST_DATA;
+        if (wol->wolopts & WAKE_MCAST)
+                criteria |= EHS_WAKE_ON_MULTICAST_DATA;
+        if (wol->wolopts & WAKE_BCAST)
+                criteria |= EHS_WAKE_ON_BROADCAST_DATA;
+        if (wol->wolopts & WAKE_PHY)
+                criteria |= EHS_WAKE_ON_MAC_EVENT;
+        if (wol->wolopts == 0)
+                criteria |= EHS_REMOVE_WAKEUP;
 
         return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL);
 }
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 92bc8c5f1ca..3fac4efa5ac 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -508,7 +508,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
         /* Fill the receive configuration URB and initialise the Rx call back */
         usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
                           usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
-                          (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
+                          skb->data + IPFIELD_ALIGN_OFFSET,
                           MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
                           cardp);
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 17e199546ee..92af9b96bb7 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -426,12 +426,16 @@ static const char p54u_romboot_3887[] = "~~~~";
 static int p54u_firmware_reset_3887(struct ieee80211_hw *dev)
 {
         struct p54u_priv *priv = dev->priv;
-        u8 buf[4];
+        u8 *buf;
         int ret;
 
-        memcpy(&buf, p54u_romboot_3887, sizeof(buf));
+        buf = kmalloc(4, GFP_KERNEL);
+        if (!buf)
+                return -ENOMEM;
+        memcpy(buf, p54u_romboot_3887, 4);
         ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
-                            buf, sizeof(buf));
+                            buf, 4);
+        kfree(buf);
         if (ret)
                 dev_err(&priv->udev->dev, "(p54usb) unable to jump to "
                         "boot ROM (%d)!\n", ret);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 71761b34383..73bbec58341 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -815,6 +815,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 
         mutex_init(&rt2x00dev->csr_mutex);
 
+        set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
         /*
          * Make room for rt2x00_intf inside the per-interface
          * structure ieee80211_vif.
@@ -871,8 +873,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
         rt2x00leds_register(rt2x00dev);
         rt2x00debug_register(rt2x00dev);
 
-        set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
-
         return 0;
 
 exit:
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index c64db0ba7f4..c708d0be915 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -362,8 +362,9 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev)
 
         rt2x00link_reset_tuner(rt2x00dev, false);
 
-        ieee80211_queue_delayed_work(rt2x00dev->hw,
-                                     &link->work, LINK_TUNE_INTERVAL);
+        if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+                ieee80211_queue_delayed_work(rt2x00dev->hw,
+                                             &link->work, LINK_TUNE_INTERVAL);
 }
 
 void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev)
@@ -469,8 +470,10 @@ static void rt2x00link_tuner(struct work_struct *work)
          * Increase tuner counter, and reschedule the next link tuner run.
          */
         link->count++;
-        ieee80211_queue_delayed_work(rt2x00dev->hw,
-                                     &link->work, LINK_TUNE_INTERVAL);
+
+        if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+                ieee80211_queue_delayed_work(rt2x00dev->hw,
+                                             &link->work, LINK_TUNE_INTERVAL);
 }
 
 void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 501544882c2..f02b48a9059 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -47,6 +47,8 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
             (requesttype == USB_VENDOR_REQUEST_IN) ?
             usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);
 
+        if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+                return -ENODEV;
 
         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
                 status = usb_control_msg(usb_dev, pipe, request, requesttype,
@@ -60,8 +62,10 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
                  * -ENODEV: Device has disappeared, no point continuing.
                  * All other errors: Try again.
                  */
-                else if (status == -ENODEV)
+                else if (status == -ENODEV) {
+                        clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
                         break;
+                }
         }
 
         ERROR(rt2x00dev,
@@ -161,6 +165,9 @@ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 {
         unsigned int i;
 
+        if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+                return -ENODEV;
+
         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
                 rt2x00usb_register_read_lock(rt2x00dev, offset, reg);
                 if (!rt2x00_get_field32(*reg, field))
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index b8f5ee33445..14e7bb21007 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2389,10 +2389,13 @@ static struct usb_device_id rt73usb_device_table[] = {
         { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
         /* MSI */
+        { USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
+        /* Ovislink */
+        { USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
         /* Ralink */
         { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
@@ -2420,6 +2423,8 @@ static struct usb_device_id rt73usb_device_table[] = {
         /* Planex */
         { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
         { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+        /* WideTell */
+        { USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) },
         /* Zcom */
         { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
         /* ZyXEL */
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index a1c670fc155..cf8a4a40fdf 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -210,10 +210,10 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev)
 
         /* turn the LED off before exiting */
         ieee80211_queue_delayed_work(dev, &priv->led_off, 0);
-        cancel_delayed_work_sync(&priv->led_off);
-        cancel_delayed_work_sync(&priv->led_on);
         rtl8187_unregister_led(&priv->led_rx);
         rtl8187_unregister_led(&priv->led_tx);
+        cancel_delayed_work_sync(&priv->led_off);
+        cancel_delayed_work_sync(&priv->led_on);
 }
 #endif /* def CONFIG_RTL8187_LED */
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
index 9fab13e4004..cad8037ab2a 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
@@ -18,6 +18,7 @@
 #include <net/mac80211.h>
 
 #include "rtl8187.h"
+#include "rtl8187_rfkill.h"
 
 static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
 {