via-velocity: more cleanup

Per Al's suggestion, get rid of the stupid stuff:
Remove cam_type switch,
And deinline things that aren't important for speed.
And make big macro and inline.
And remove some dead/unused code.
And use const char * for chip name.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 9 insertions, 195 deletions

diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index af17161286a..aa9179623d9 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1173,7 +1173,7 @@ enum chip_type {
 
 struct velocity_info_tbl {
         enum chip_type chip_id;
-        char *name;
+        const char *name;
         int txqueue;
         u32 flags;
 };
@@ -1194,14 +1194,6 @@ struct velocity_info_tbl {
 #define mac_disable_int(regs)           writel(CR0_GINTMSK1,&((regs)->CR0Clr))
 #define mac_enable_int(regs)            writel(CR0_GINTMSK1,&((regs)->CR0Set))
 
-#define mac_hw_mibs_read(regs, MIBs) {\
-        int i;\
-        BYTE_REG_BITS_ON(MIBCR_MPTRINI,&((regs)->MIBCR));\
-        for (i=0;i<HW_MIB_SIZE;i++) {\
-                (MIBs)[i]=readl(&((regs)->MIBData));\
-        }\
-}
-
 #define mac_set_dma_length(regs, n) {\
         BYTE_REG_BITS_SET((n),0x07,&((regs)->DCFG));\
 }
@@ -1226,195 +1218,17 @@ struct velocity_info_tbl {
         writew(TRDCSR_WAK<<(n*4),&((regs)->TDCSRSet));\
 }
 
-#define mac_eeprom_reload(regs) {\
-        int i=0;\
-        BYTE_REG_BITS_ON(EECSR_RELOAD,&((regs)->EECSR));\
-        do {\
-                udelay(10);\
-                if (i++>0x1000) {\
-                        break;\
-                }\
-        }while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&((regs)->EECSR)));\
-}
-
-enum velocity_cam_type {
-        VELOCITY_VLAN_ID_CAM = 0,
-        VELOCITY_MULTICAST_CAM
-};
-
-/**
- *      mac_get_cam_mask        -       Read a CAM mask
- *      @regs: register block for this velocity
- *      @mask: buffer to store mask
- *      @cam_type: CAM to fetch
- *
- *      Fetch the mask bits of the selected CAM and store them into the
- *      provided mask buffer.
- */
-
-static inline void mac_get_cam_mask(struct mac_regs __iomem * regs, u8 * mask, enum velocity_cam_type cam_type)
-{
-        int i;
-        /* Select CAM mask */
-        BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
-        if (cam_type == VELOCITY_VLAN_ID_CAM)
-                writeb(CAMADDR_VCAMSL, &regs->CAMADDR);
-        else
-                writeb(0, &regs->CAMADDR);
-
-        /* read mask */
-        for (i = 0; i < 8; i++)
-                *mask++ = readb(&(regs->MARCAM[i]));
-
-        /* disable CAMEN */
-        writeb(0, &regs->CAMADDR);
-
-        /* Select mar */
-        BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
-}
-
-/**
- *      mac_set_cam_mask        -       Set a CAM mask
- *      @regs: register block for this velocity
- *      @mask: CAM mask to load
- *      @cam_type: CAM to store
- *
- *      Store a new mask into a CAM
- */
-
-static inline void mac_set_cam_mask(struct mac_regs __iomem * regs, u8 * mask, enum velocity_cam_type cam_type)
-{
-        int i;
-        /* Select CAM mask */
-        BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
-        if (cam_type == VELOCITY_VLAN_ID_CAM)
-                writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, &regs->CAMADDR);
-        else
-                writeb(CAMADDR_CAMEN, &regs->CAMADDR);
-
-        for (i = 0; i < 8; i++) {
-                writeb(*mask++, &(regs->MARCAM[i]));
-        }
-        /* disable CAMEN */
-        writeb(0, &regs->CAMADDR);
-
-        /* Select mar */
-        BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-}
-
-/**
- *      mac_set_cam     -       set CAM data
- *      @regs: register block of this velocity
- *      @idx: Cam index
- *      @addr: 2 or 6 bytes of CAM data
- *      @cam_type: CAM to load
- *
- *      Load an address or vlan tag into a CAM
- */
-
-static inline void mac_set_cam(struct mac_regs __iomem * regs, int idx, u8 *addr, enum velocity_cam_type cam_type)
-{
-        int i;
-
-        /* Select CAM mask */
-        BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
-        idx &= (64 - 1);
-
-        if (cam_type == VELOCITY_VLAN_ID_CAM)
-                writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, &regs->CAMADDR);
-        else
-                writeb(CAMADDR_CAMEN | idx, &regs->CAMADDR);
-
-        if (cam_type == VELOCITY_VLAN_ID_CAM)
-                writew(*((u16 *) addr), &regs->MARCAM[0]);
-        else {
-                for (i = 0; i < 6; i++) {
-                        writeb(*addr++, &(regs->MARCAM[i]));
-                }
-        }
-        BYTE_REG_BITS_ON(CAMCR_CAMWR, &regs->CAMCR);
-
-        udelay(10);
-
-        writeb(0, &regs->CAMADDR);
-
-        /* Select mar */
-        BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-}
-
-/**
- *      mac_get_cam     -       fetch CAM data
- *      @regs: register block of this velocity
- *      @idx: Cam index
- *      @addr: buffer to hold up to 6 bytes of CAM data
- *      @cam_type: CAM to load
- *
- *      Load an address or vlan tag from a CAM into the buffer provided by
- *      the caller. VLAN tags are 2 bytes the address cam entries are 6.
- */
-
-static inline void mac_get_cam(struct mac_regs __iomem * regs, int idx, u8 *addr, enum velocity_cam_type cam_type)
-{
-        int i;
-
-        /* Select CAM mask */
-        BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-
-        idx &= (64 - 1);
-
-        if (cam_type == VELOCITY_VLAN_ID_CAM)
-                writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, &regs->CAMADDR);
-        else
-                writeb(CAMADDR_CAMEN | idx, &regs->CAMADDR);
-
-        BYTE_REG_BITS_ON(CAMCR_CAMRD, &regs->CAMCR);
-
-        udelay(10);
-
-        if (cam_type == VELOCITY_VLAN_ID_CAM)
-                *((u16 *) addr) = readw(&(regs->MARCAM[0]));
-        else
-                for (i = 0; i < 6; i++, addr++)
-                        *((u8 *) addr) = readb(&(regs->MARCAM[i]));
-
-        writeb(0, &regs->CAMADDR);
-
-        /* Select mar */
-        BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
-}
-
-/**
- *      mac_wol_reset   -       reset WOL after exiting low power
- *      @regs: register block of this velocity
- *
- *      Called after we drop out of wake on lan mode in order to
- *      reset the Wake on lan features. This function doesn't restore
- *      the rest of the logic from the result of sleep/wakeup
- */
-
-static inline void mac_wol_reset(struct mac_regs __iomem * regs)
-{
+static inline void mac_eeprom_reload(struct mac_regs __iomem * regs) {
+        int i=0;
 
-        /* Turn off SWPTAG right after leaving power mode */
-        BYTE_REG_BITS_OFF(STICKHW_SWPTAG, &regs->STICKHW);
-        /* clear sticky bits */
-        BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
-
-        BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, &regs->CHIPGCR);
-        BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
-        /* disable force PME-enable */
-        writeb(WOLCFG_PMEOVR, &regs->WOLCFGClr);
-        /* disable power-event config bit */
-        writew(0xFFFF, &regs->WOLCRClr);
-        /* clear power status */
-        writew(0xFFFF, &regs->WOLSRClr);
+        BYTE_REG_BITS_ON(EECSR_RELOAD,&(regs->EECSR));
+        do {
+                udelay(10);
+                if (i++>0x1000)
+                        break;
+        } while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&(regs->EECSR)));
 }
 
-
 /*
  * Header for WOL definitions. Used to compute hashes
  */