ixgbe: use netif_<level> instead of netdev_<level>

This patch restores the ability to set msglvl through ethtool.
The issue was introduced by:
commit 849c45423c0c108e08d67644728cc9b0ed225fa1

CC: Joe Perches <joe@perches.com>

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 41 insertions, 38 deletions

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index ebc4b04fdef..55099a50cca 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -696,7 +696,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
                 /* detected Tx unit hang */
                 union ixgbe_adv_tx_desc *tx_desc;
                 tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
-                e_err("Detected Tx Unit Hang\n"
+                e_err(drv, "Detected Tx Unit Hang\n"
                       "  Tx Queue             <%d>\n"
                       "  TDH, TDT             <%x>, <%x>\n"
                       "  next_to_use          <%x>\n"
@@ -812,8 +812,8 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
         if (adapter->detect_tx_hung) {
                 if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
                         /* schedule immediate reset if we believe we hung */
-                        e_info("tx hang %d detected, resetting adapter\n",
-                               adapter->tx_timeout_count + 1);
+                        e_info(probe, "tx hang %d detected, resetting "
+                               "adapter\n", adapter->tx_timeout_count + 1);
                         ixgbe_tx_timeout(adapter->netdev);
                 }
         }
@@ -1652,8 +1652,8 @@ static void ixgbe_check_overtemp_task(struct work_struct *work)
                                 return;
                         break;
                 }
-                e_crit("Network adapter has been stopped because it "
-                       "has over heated. Restart the computer. If the problem "
+                e_crit(drv, "Network adapter has been stopped because it has "
+                       "over heated. Restart the computer. If the problem "
                        "persists, power off the system and replace the "
                        "adapter\n");
                 /* write to clear the interrupt */
@@ -1667,7 +1667,7 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
 
         if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
             (eicr & IXGBE_EICR_GPI_SDP1)) {
-                e_crit("Fan has stopped, replace the adapter\n");
+                e_crit(probe, "Fan has stopped, replace the adapter\n");
                 /* write to clear the interrupt */
                 IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
         }
@@ -2153,7 +2153,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
                                   handler, 0, adapter->name[vector],
                                   adapter->q_vector[vector]);
                 if (err) {
-                        e_err("request_irq failed for MSIX interrupt: "
+                        e_err(probe, "request_irq failed for MSIX interrupt "
                               "Error: %d\n", err);
                         goto free_queue_irqs;
                 }
@@ -2163,7 +2163,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
         err = request_irq(adapter->msix_entries[vector].vector,
                           ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
         if (err) {
-                e_err("request_irq for msix_lsc failed: %d\n", err);
+                e_err(probe, "request_irq for msix_lsc failed: %d\n", err);
                 goto free_queue_irqs;
         }
 
@@ -2349,7 +2349,7 @@ static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
         }
 
         if (err)
-                e_err("request_irq failed, Error %d\n", err);
+                e_err(probe, "request_irq failed, Error %d\n", err);
 
         return err;
 }
@@ -2420,7 +2420,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
         map_vector_to_rxq(adapter, 0, 0);
         map_vector_to_txq(adapter, 0, 0);
 
-        e_info("Legacy interrupt IVAR setup done\n");
+        e_info(hw, "Legacy interrupt IVAR setup done\n");
 }
 
 /**
@@ -3316,7 +3316,7 @@ static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
                         msleep(1);
         }
         if (k >= IXGBE_MAX_RX_DESC_POLL) {
-                e_err("RXDCTL.ENABLE on Rx queue %d not set within "
+                e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within "
                       "the polling period\n", rxr);
         }
         ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
@@ -3446,7 +3446,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
                         } while (--wait_loop &&
                                  !(txdctl & IXGBE_TXDCTL_ENABLE));
                         if (!wait_loop)
-                                e_err("Could not enable Tx Queue %d\n", j);
+                                e_err(drv, "Could not enable Tx Queue %d\n", j);
                 }
         }
 
@@ -3494,7 +3494,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
         if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
                 u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                 if (esdp & IXGBE_ESDP_SDP1)
-                        e_crit("Fan has stopped, replace the adapter\n");
+                        e_crit(drv, "Fan has stopped, replace the adapter\n");
         }
 
         /*
@@ -3523,7 +3523,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
         } else {
                 err = ixgbe_non_sfp_link_config(hw);
                 if (err)
-                        e_err("link_config FAILED %d\n", err);
+                        e_err(probe, "link_config FAILED %d\n", err);
         }
 
         for (i = 0; i < adapter->num_tx_queues; i++)
@@ -3977,12 +3977,12 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
                 adapter->num_tx_queues = 1;
 #ifdef CONFIG_IXGBE_DCB
                 if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-                        e_info("FCoE enabled with DCB\n");
+                        e_info(probe, "FCoE enabled with DCB\n");
                         ixgbe_set_dcb_queues(adapter);
                 }
 #endif
                 if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-                        e_info("FCoE enabled with RSS\n");
+                        e_info(probe, "FCoE enabled with RSS\n");
                         if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
                             (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
                                 ixgbe_set_fdir_queues(adapter);
@@ -4633,8 +4633,8 @@ int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
         }
 
         e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
-               (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
-               adapter->num_rx_queues, adapter->num_tx_queues);
+                   (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+                   adapter->num_rx_queues, adapter->num_tx_queues);
 
         set_bit(__IXGBE_DOWN, &adapter->state);
 
@@ -4711,7 +4711,7 @@ static void ixgbe_sfp_task(struct work_struct *work)
                                   "supported module.\n");
                         unregister_netdev(adapter->netdev);
                 } else {
-                        e_info("detected SFP+: %d\n", hw->phy.sfp_type);
+                        e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
                 }
                 /* don't need this routine any more */
                 clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
@@ -4891,7 +4891,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
 err:
         vfree(tx_ring->tx_buffer_info);
         tx_ring->tx_buffer_info = NULL;
-        e_err("Unable to allocate memory for the Tx descriptor ring\n");
+        e_err(probe, "Unable to allocate memory for the Tx descriptor ring\n");
         return -ENOMEM;
 }
 
@@ -4913,7 +4913,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
                 err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
                 if (!err)
                         continue;
-                e_err("Allocation for Tx Queue %u failed\n", i);
+                e_err(probe, "Allocation for Tx Queue %u failed\n", i);
                 break;
         }
 
@@ -4938,7 +4938,8 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
         if (!rx_ring->rx_buffer_info)
                 rx_ring->rx_buffer_info = vmalloc(size);
         if (!rx_ring->rx_buffer_info) {
-                e_err("vmalloc allocation failed for the Rx desc ring\n");
+                e_err(probe, "vmalloc allocation failed for the Rx "
+                      "descriptor ring\n");
                 goto alloc_failed;
         }
         memset(rx_ring->rx_buffer_info, 0, size);
@@ -4951,7 +4952,8 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
                                            &rx_ring->dma, GFP_KERNEL);
 
         if (!rx_ring->desc) {
-                e_err("Memory allocation failed for the Rx desc ring\n");
+                e_err(probe, "Memory allocation failed for the Rx "
+                      "descriptor ring\n");
                 vfree(rx_ring->rx_buffer_info);
                 goto alloc_failed;
         }
@@ -4984,7 +4986,7 @@ static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
                 err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
                 if (!err)
                         continue;
-                e_err("Allocation for Rx Queue %u failed\n", i);
+                e_err(probe, "Allocation for Rx Queue %u failed\n", i);
                 break;
         }
 
@@ -5083,7 +5085,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
         if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
                 return -EINVAL;
 
-        e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+        e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
         /* must set new MTU before calling down or up */
         netdev->mtu = new_mtu;
 
@@ -5597,7 +5599,7 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
                         set_bit(__IXGBE_FDIR_INIT_DONE,
                                 &(adapter->tx_ring[i]->reinit_state));
         } else {
-                e_err("failed to finish FDIR re-initialization, "
+                e_err(probe, "failed to finish FDIR re-initialization, "
                       "ignored adding FDIR ATR filters\n");
         }
         /* Done FDIR Re-initialization, enable transmits */
@@ -5669,7 +5671,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
                                 flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
                         }
 
-                        e_info("NIC Link is Up %s, Flow Control: %s\n",
+                        e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
                                (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
                                "10 Gbps" :
                                (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
@@ -5687,7 +5689,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
                 adapter->link_up = false;
                 adapter->link_speed = 0;
                 if (netif_carrier_ok(netdev)) {
-                        e_info("NIC Link is Down\n");
+                        e_info(drv, "NIC Link is Down\n");
                         netif_carrier_off(netdev);
                 }
         }
@@ -5863,8 +5865,9 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
                                 break;
                         default:
                                 if (unlikely(net_ratelimit())) {
-                                        e_warn("partial checksum but "
-                                               "proto=%x!\n", skb->protocol);
+                                        e_warn(probe, "partial checksum "
+                                               "but proto=%x!\n",
+                                               skb->protocol);
                                 }
                                 break;
                         }
@@ -6472,7 +6475,7 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
         adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
         err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
         if (err) {
-                e_err("Failed to enable PCI sriov: %d\n", err);
+                e_err(probe, "Failed to enable PCI sriov: %d\n", err);
                 goto err_novfs;
         }
         /* If call to enable VFs succeeded then allocate memory
@@ -6496,8 +6499,8 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
         }
 
         /* Oh oh */
-        e_err("Unable to allocate memory for VF Data Storage - SRIOV "
-              "disabled\n");
+        e_err(probe, "Unable to allocate memory for VF Data Storage - "
+              "SRIOV disabled\n");
         pci_disable_sriov(adapter->pdev);
 
 err_novfs:
@@ -6667,7 +6670,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
         if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
                 u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                 if (esdp & IXGBE_ESDP_SDP1)
-                        e_crit("Fan has stopped, replace the adapter\n");
+                        e_crit(probe, "Fan has stopped, replace the adapter\n");
         }
 
         /* reset_hw fills in the perm_addr as well */
@@ -6698,7 +6701,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
         ixgbe_probe_vf(adapter, ii);
 
-        netdev->features =    NETIF_F_SG |
+        netdev->features = NETIF_F_SG |
                            NETIF_F_IP_CSUM |
                            NETIF_F_HW_VLAN_TX |
                            NETIF_F_HW_VLAN_RX |
@@ -6851,7 +6854,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
         }
 #endif
         if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
-                e_info("IOV is enabled with %d VFs\n", adapter->num_vfs);
+                e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs);
                 for (i = 0; i < adapter->num_vfs; i++)
                         ixgbe_vf_configuration(pdev, (i | 0x10000000));
         }
@@ -6999,7 +7002,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
         int err;
 
         if (pci_enable_device_mem(pdev)) {
-                e_err("Cannot re-enable PCI device after reset.\n");
+                e_err(probe, "Cannot re-enable PCI device after reset.\n");
                 result = PCI_ERS_RESULT_DISCONNECT;
         } else {
                 pci_set_master(pdev);
@@ -7037,7 +7040,7 @@ static void ixgbe_io_resume(struct pci_dev *pdev)
 
         if (netif_running(netdev)) {
                 if (ixgbe_up(adapter)) {
-                        e_info("ixgbe_up failed after reset\n");
+                        e_info(probe, "ixgbe_up failed after reset\n");
                         return;
                 }
         }