nand/denali: Fixed handle ECC error bugs

Once the last ECC error was handled, controller will triger an
interrupt. If this interrupt can not be clean on time, controller
may corrupt.

Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 29 insertions, 16 deletions

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 4ab9d89eae5..e4462c0740b 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -643,6 +643,7 @@ static void clear_interrupts(struct denali_nand_info *denali)
         spin_lock_irq(&denali->irq_lock);
 
         status = read_interrupt_status(denali);
+        clear_interrupt(denali, status);
 
 #if DEBUG_DENALI
         denali->irq_debug_array[denali->idx++] = 0x30000000 | status;
@@ -1015,12 +1016,12 @@ bool is_erased(uint8_t *buf, int len)
 #define ECC_SECTOR(x)   (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
 #define ECC_BYTE(x)     (((x) & ECC_ERROR_ADDRESS__OFFSET))
 #define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
-#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO))
-#define ECC_ERR_DEVICE(x)       ((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8)
+#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO__ERROR_TYPE))
+#define ECC_ERR_DEVICE(x)       (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8)
 #define ECC_LAST_ERR(x)         ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
 
 static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
-                        uint8_t *oobbuf, uint32_t irq_status)
+                                        uint32_t irq_status)
 {
         bool check_erased_page = false;
 
@@ -1029,6 +1030,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
                 uint32_t err_address = 0, err_correction_info = 0;
                 uint32_t err_byte = 0, err_sector = 0, err_device = 0;
                 uint32_t err_correction_value = 0;
+                denali_set_intr_modes(denali, false);
 
                 do {
                         err_address = ioread32(denali->flash_reg +
@@ -1036,7 +1038,6 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
                         err_sector = ECC_SECTOR(err_address);
                         err_byte = ECC_BYTE(err_address);
 
-
                         err_correction_info = ioread32(denali->flash_reg +
                                                 ERR_CORRECTION_INFO);
                         err_correction_value =
@@ -1044,20 +1045,23 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
                         err_device = ECC_ERR_DEVICE(err_correction_info);
 
                         if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
-                                /* offset in our buffer is computed as:
-                                   sector number * sector size + offset in
-                                   sector
-                                 */
-                                int offset = err_sector * ECC_SECTOR_SIZE +
-                                                                err_byte;
-                                if (offset < denali->mtd.writesize) {
+                                /* If err_byte is larger than ECC_SECTOR_SIZE,
+                                 * means error happend in OOB, so we ignore
+                                 * it. It's no need for us to correct it
+                                 * err_device is represented the NAND error
+                                 * bits are happened in if there are more
+                                 * than one NAND connected.
+                                 * */
+                                if (err_byte < ECC_SECTOR_SIZE) {
+                                        int offset;
+                                        offset = (err_sector *
+                                                        ECC_SECTOR_SIZE +
+                                                        err_byte) *
+                                                        denali->devnum +
+                                                        err_device;
                                         /* correct the ECC error */
                                         buf[offset] ^= err_correction_value;
                                         denali->mtd.ecc_stats.corrected++;
-                                } else {
-                                        /* bummer, couldn't correct the error */
-                                        printk(KERN_ERR "ECC offset invalid\n");
-                                        denali->mtd.ecc_stats.failed++;
                                 }
                         } else {
                                 /* if the error is not correctable, need to
@@ -1074,6 +1078,15 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
                                         err_correction_info);
 #endif
                 } while (!ECC_LAST_ERR(err_correction_info));
+                /* Once handle all ecc errors, controller will triger
+                 * a ECC_TRANSACTION_DONE interrupt, so here just wait
+                 * for a while for this interrupt
+                 * */
+                while (!(read_interrupt_status(denali) &
+                                INTR_STATUS0__ECC_TRANSACTION_DONE))
+                        cpu_relax();
+                clear_interrupts(denali);
+                denali_set_intr_modes(denali, true);
         }
         return check_erased_page;
 }
@@ -1237,7 +1250,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 
         memcpy(buf, denali->buf.buf, mtd->writesize);
 
-        check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status);
+        check_erased_page = handle_ecc(denali, buf, irq_status);
         denali_enable_dma(denali, false);
 
         if (check_erased_page) {