[MTD] Remove references to TI 'toto' platform.

This was a reference board for which support never got merged upstream.
Kill it off, at rmk's suggestion.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

3 files changed, 0 insertions, 141 deletions

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index db667b16c04..3ae76ecc07d 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -434,13 +434,6 @@ config MTD_CEIVA
           PhotoMax Digital Picture Frame.
           If you have such a device, say 'Y'.
 
-config MTD_NOR_TOTO
-        tristate "NOR Flash device on TOTO board"
-        depends on ARCH_OMAP && OMAP_TOTO
-        help
-          This enables access to the NOR flash on the Texas Instruments
-          TOTO board.
-
 config MTD_H720X
         tristate "Hynix evaluation board mappings"
         depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 )
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index b2582506cde..6d9ba35caf1 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -52,7 +52,6 @@ obj-$(CONFIG_MTD_NETtel)	+= nettel.o
 obj-$(CONFIG_MTD_SCB2_FLASH)    += scb2_flash.o
 obj-$(CONFIG_MTD_H720X)         += h720x-flash.o
 obj-$(CONFIG_MTD_SBC8240)       += sbc8240.o
-obj-$(CONFIG_MTD_NOR_TOTO)      += omap-toto-flash.o
 obj-$(CONFIG_MTD_IXP4XX)        += ixp4xx.o
 obj-$(CONFIG_MTD_IXP2000)       += ixp2000.o
 obj-$(CONFIG_MTD_WRSBC8260)     += wr_sbc82xx_flash.o
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
deleted file mode 100644
index 0a60ebbc217..00000000000
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * NOR Flash memory access on TI Toto board
- *
- * jzhang@ti.com (C) 2003 Texas Instruments.
- *
- *  (C) 2002 MontVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-
-#ifndef CONFIG_ARCH_OMAP
-#error This is for OMAP architecture only
-#endif
-
-//these lines need be moved to a hardware header file
-#define OMAP_TOTO_FLASH_BASE 0xd8000000
-#define OMAP_TOTO_FLASH_SIZE 0x80000
-
-static struct map_info omap_toto_map_flash = {
-        .name =         "OMAP Toto flash",
-        .bankwidth =    2,
-        .virt =         (void __iomem *)OMAP_TOTO_FLASH_BASE,
-};
-
-
-static struct mtd_partition toto_flash_partitions[] = {
-        {
-                .name =         "BootLoader",
-                .size =         0x00040000,     /* hopefully u-boot will stay 128k + 128*/
-                .offset =       0,
-                .mask_flags =   MTD_WRITEABLE,  /* force read-only */
-        }, {
-                .name =         "ReservedSpace",
-                .size =         0x00030000,
-                .offset =       MTDPART_OFS_APPEND,
-                //mask_flags:   MTD_WRITEABLE,  /* force read-only */
-        }, {
-                .name =         "EnvArea",      /* bottom 64KiB for env vars */
-                .size =         MTDPART_SIZ_FULL,
-                .offset =       MTDPART_OFS_APPEND,
-        }
-};
-
-static struct mtd_partition *parsed_parts;
-
-static struct mtd_info *flash_mtd;
-
-static int __init init_flash (void)
-{
-
-        struct mtd_partition *parts;
-        int nb_parts = 0;
-        int parsed_nr_parts = 0;
-        const char *part_type;
-
-        /*
-         * Static partition definition selection
-         */
-        part_type = "static";
-
-        parts = toto_flash_partitions;
-        nb_parts = ARRAY_SIZE(toto_flash_partitions);
-        omap_toto_map_flash.size = OMAP_TOTO_FLASH_SIZE;
-        omap_toto_map_flash.phys = virt_to_phys(OMAP_TOTO_FLASH_BASE);
-
-        simple_map_init(&omap_toto_map_flash);
-        /*
-         * Now let's probe for the actual flash.  Do it here since
-         * specific machine settings might have been set above.
-         */
-        printk(KERN_NOTICE "OMAP toto flash: probing %d-bit flash bus\n",
-                omap_toto_map_flash.bankwidth*8);
-        flash_mtd = do_map_probe("jedec_probe", &omap_toto_map_flash);
-        if (!flash_mtd)
-                return -ENXIO;
-
-        if (parsed_nr_parts > 0) {
-                parts = parsed_parts;
-                nb_parts = parsed_nr_parts;
-        }
-
-        if (nb_parts == 0) {
-                printk(KERN_NOTICE "OMAP toto flash: no partition info available,"
-                        "registering whole flash at once\n");
-                if (add_mtd_device(flash_mtd)){
-            return -ENXIO;
-        }
-        } else {
-                printk(KERN_NOTICE "Using %s partition definition\n",
-                        part_type);
-                return add_mtd_partitions(flash_mtd, parts, nb_parts);
-        }
-        return 0;
-}
-
-int __init omap_toto_mtd_init(void)
-{
-        int status;
-
-        if (status = init_flash()) {
-                printk(KERN_ERR "OMAP Toto Flash: unable to init map for toto flash\n");
-        }
-    return status;
-}
-
-static void  __exit omap_toto_mtd_cleanup(void)
-{
-        if (flash_mtd) {
-                del_mtd_partitions(flash_mtd);
-                map_destroy(flash_mtd);
-                kfree(parsed_parts);
-        }
-}
-
-module_init(omap_toto_mtd_init);
-module_exit(omap_toto_mtd_cleanup);
-
-MODULE_AUTHOR("Jian Zhang");
-MODULE_DESCRIPTION("OMAP Toto board map driver");
-MODULE_LICENSE("GPL");