pch_uart: reference clock on CM-iTC

Default clock source for UARTs on Topcliff is external UART_CLK.
On CM-iTC USB_48MHz is used instead. After VCO2PLL and DIV
manipulations UARTs will receive 192 MHz.
Clock manipulations on Topcliff are controlled in pch_phub.c

v2: redone against the linux-next tree
v3: redone against linux/kernel/git/next/linux-next.git snapshot

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 16 insertions, 0 deletions

diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 98bffc471b1..5dd0b921bfc 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -27,6 +27,7 @@
 #include <linux/mutex.h>
 #include <linux/if_ether.h>
 #include <linux/ctype.h>
+#include <linux/dmi.h>
 
 #define PHUB_STATUS 0x00                /* Status Register offset */
 #define PHUB_CONTROL 0x04               /* Control Register offset */
@@ -46,6 +47,13 @@
 #define PCH_MINOR_NOS 1
 #define CLKCFG_CAN_50MHZ 0x12000000
 #define CLKCFG_CANCLK_MASK 0xFF000000
+#define CLKCFG_UART_MASK                        0xFFFFFF
+
+/* CM-iTC */
+#define CLKCFG_UART_48MHZ                       (1 << 16)
+#define CLKCFG_BAUDDIV                          (2 << 20)
+#define CLKCFG_PLL2VCO                          (8 << 9)
+#define CLKCFG_UARTCLKSEL                       (1 << 18)
 
 /* Macros for ML7213 */
 #define PCI_VENDOR_ID_ROHM                      0x10db
@@ -618,6 +626,14 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
                                                CLKCFG_CAN_50MHZ,
                                                CLKCFG_CANCLK_MASK);
 
+                /* quirk for CM-iTC board */
+                if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+                        pch_phub_read_modify_write_reg(chip,
+                                                (unsigned int)CLKCFG_REG_OFFSET,
+                                                CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV |
+                                                CLKCFG_PLL2VCO | CLKCFG_UARTCLKSEL,
+                                                CLKCFG_UART_MASK);
+
                 /* set the prefech value */
                 iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
                 /* set the interrupt delay value */