Added missing tegra files.HEADmaster

1 files changed, 367 insertions, 0 deletions

diff --git a/drivers/misc/inv_mpu/pressure/bma085.c b/drivers/misc/inv_mpu/pressure/bma085.c
new file mode 100644
index 00000000000..696d2b6e183
--- /dev/null
+++ b/drivers/misc/inv_mpu/pressure/bma085.c
@@ -0,0 +1,367 @@
+/*
+        $License:
+        Copyright (C) 2011 InvenSense Corporation, All Rights Reserved.
+
+        This program is free software; you can redistribute it and/or modify
+        it under the terms of the GNU General Public License as published by
+        the Free Software Foundation; either version 2 of the License, or
+        (at your option) any later version.
+
+        This program is distributed in the hope that it will be useful,
+        but WITHOUT ANY WARRANTY; without even the implied warranty of
+        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+        GNU General Public License for more details.
+
+        You should have received a copy of the GNU General Public License
+        along with this program.  If not, see <http://www.gnu.org/licenses/>.
+        $
+ */
+
+/**
+ *  @defgroup   ACCELDL (Motion Library - Pressure Driver Layer)
+ *  @brief      Provides the interface to setup and handle a pressure
+ *              connected to the secondary I2C interface of the gyroscope.
+ *
+ *  @{
+ *      @file   bma085.c
+ *      @brief  Pressure setup and handling methods.
+ */
+
+/* ------------------ */
+/* - Include Files. - */
+/* ------------------ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "mpu-dev.h"
+
+#include <linux/mpu.h>
+#include "mlsl.h"
+#include "log.h"
+
+/*
+ * this structure holds all device specific calibration parameters
+ */
+struct bmp085_calibration_param_t {
+        short ac1;
+        short ac2;
+        short ac3;
+        unsigned short ac4;
+        unsigned short ac5;
+        unsigned short ac6;
+        short b1;
+        short b2;
+        short mb;
+        short mc;
+        short md;
+        long param_b5;
+};
+
+struct bmp085_calibration_param_t cal_param;
+
+#define PRESSURE_BMA085_PARAM_MG      3038        /* calibration parameter */
+#define PRESSURE_BMA085_PARAM_MH     -7357        /* calibration parameter */
+#define PRESSURE_BMA085_PARAM_MI      3791        /* calibration parameter */
+
+/*********************************************
+ *    Pressure Initialization Functions
+ *********************************************/
+
+static int bma085_suspend(void *mlsl_handle,
+                          struct ext_slave_descr *slave,
+                          struct ext_slave_platform_data *pdata)
+{
+        int result = INV_SUCCESS;
+        return result;
+}
+
+#define PRESSURE_BMA085_PROM_START_ADDR  (0xAA)
+#define PRESSURE_BMA085_PROM_DATA_LEN    (22)
+#define PRESSURE_BMP085_CTRL_MEAS_REG    (0xF4)
+/* temperature measurent */
+#define PRESSURE_BMP085_T_MEAS           (0x2E)
+/* pressure measurement; oversampling_setting */
+#define PRESSURE_BMP085_P_MEAS_OSS_0     (0x34)
+#define PRESSURE_BMP085_P_MEAS_OSS_1     (0x74)
+#define PRESSURE_BMP085_P_MEAS_OSS_2     (0xB4)
+#define PRESSURE_BMP085_P_MEAS_OSS_3     (0xF4)
+#define PRESSURE_BMP085_ADC_OUT_MSB_REG  (0xF6)
+#define PRESSURE_BMP085_ADC_OUT_LSB_REG  (0xF7)
+
+static int bma085_resume(void *mlsl_handle,
+                         struct ext_slave_descr *slave,
+                         struct ext_slave_platform_data *pdata)
+{
+        int result;
+        unsigned char data[PRESSURE_BMA085_PROM_DATA_LEN];
+
+        result =
+            inv_serial_read(mlsl_handle, pdata->address,
+                           PRESSURE_BMA085_PROM_START_ADDR,
+                           PRESSURE_BMA085_PROM_DATA_LEN, data);
+        if (result) {
+                LOG_RESULT_LOCATION(result);
+                return result;
+        }
+
+        /* parameters AC1-AC6 */
+        cal_param.ac1 = (data[0] << 8) | data[1];
+        cal_param.ac2 = (data[2] << 8) | data[3];
+        cal_param.ac3 = (data[4] << 8) | data[5];
+        cal_param.ac4 = (data[6] << 8) | data[7];
+        cal_param.ac5 = (data[8] << 8) | data[9];
+        cal_param.ac6 = (data[10] << 8) | data[11];
+
+        /* parameters B1,B2 */
+        cal_param.b1 = (data[12] << 8) | data[13];
+        cal_param.b2 = (data[14] << 8) | data[15];
+
+        /* parameters MB,MC,MD */
+        cal_param.mb = (data[16] << 8) | data[17];
+        cal_param.mc = (data[18] << 8) | data[19];
+        cal_param.md = (data[20] << 8) | data[21];
+
+        return result;
+}
+
+static int bma085_read(void *mlsl_handle,
+                       struct ext_slave_descr *slave,
+                       struct ext_slave_platform_data *pdata,
+                       unsigned char *data)
+{
+        int result;
+        long pressure, x1, x2, x3, b3, b6;
+        unsigned long b4, b7;
+        unsigned long up;
+        unsigned short ut;
+        short oversampling_setting = 0;
+        short temperature;
+        long divisor;
+
+        /* get temprature */
+        result = inv_serial_single_write(mlsl_handle, pdata->address,
+                                       PRESSURE_BMP085_CTRL_MEAS_REG,
+                                       PRESSURE_BMP085_T_MEAS);
+        msleep(5);
+        result =
+            inv_serial_read(mlsl_handle, pdata->address,
+                           PRESSURE_BMP085_ADC_OUT_MSB_REG, 2,
+                           (unsigned char *)data);
+        if (result) {
+                LOG_RESULT_LOCATION(result);
+                return result;
+        }
+        ut = (data[0] << 8) | data[1];
+
+        x1 = (((long) ut - (long)cal_param.ac6) * (long)cal_param.ac5) >> 15;
+        divisor = x1 + cal_param.md;
+        if (!divisor)
+                return INV_ERROR_DIVIDE_BY_ZERO;
+
+        x2 = ((long)cal_param.mc << 11) / (x1 + cal_param.md);
+        cal_param.param_b5 = x1 + x2;
+        /* temperature in 0.1 degree C */
+        temperature = (short)((cal_param.param_b5 + 8) >> 4);
+
+        /* get pressure */
+        result = inv_serial_single_write(mlsl_handle, pdata->address,
+                                       PRESSURE_BMP085_CTRL_MEAS_REG,
+                                       PRESSURE_BMP085_P_MEAS_OSS_0);
+        msleep(5);
+        result =
+            inv_serial_read(mlsl_handle, pdata->address,
+                           PRESSURE_BMP085_ADC_OUT_MSB_REG, 2,
+                           (unsigned char *)data);
+        if (result) {
+                LOG_RESULT_LOCATION(result);
+                return result;
+        }
+        up = (((unsigned long) data[0] << 8) | ((unsigned long) data[1]));
+
+        b6 = cal_param.param_b5 - 4000;
+        /* calculate B3 */
+        x1 = (b6*b6) >> 12;
+        x1 *= cal_param.b2;
+        x1 >>= 11;
+
+        x2 = (cal_param.ac2*b6);
+        x2 >>= 11;
+
+        x3 = x1 + x2;
+
+        b3 = (((((long)cal_param.ac1) * 4 + x3)
+            << oversampling_setting) + 2) >> 2;
+
+        /* calculate B4 */
+        x1 = (cal_param.ac3 * b6) >> 13;
+        x2 = (cal_param.b1 * ((b6*b6) >> 12)) >> 16;
+        x3 = ((x1 + x2) + 2) >> 2;
+        b4 = (cal_param.ac4 * (unsigned long) (x3 + 32768)) >> 15;
+        if (!b4)
+                return INV_ERROR;
+
+        b7 = ((unsigned long)(up - b3) * (50000>>oversampling_setting));
+        if (b7 < 0x80000000)
+                pressure = (b7 << 1) / b4;
+        else
+                pressure = (b7 / b4) << 1;
+
+        x1 = pressure >> 8;
+        x1 *= x1;
+        x1 = (x1 * PRESSURE_BMA085_PARAM_MG) >> 16;
+        x2 = (pressure * PRESSURE_BMA085_PARAM_MH) >> 16;
+        /* pressure in Pa */
+        pressure += (x1 + x2 + PRESSURE_BMA085_PARAM_MI) >> 4;
+
+        data[0] = (unsigned char)(pressure >> 16);
+        data[1] = (unsigned char)(pressure >> 8);
+        data[2] = (unsigned char)(pressure & 0xFF);
+
+        return result;
+}
+
+static struct ext_slave_descr bma085_descr = {
+        .init             = NULL,
+        .exit             = NULL,
+        .suspend          = bma085_suspend,
+        .resume           = bma085_resume,
+        .read             = bma085_read,
+        .config           = NULL,
+        .get_config       = NULL,
+        .name             = "bma085",
+        .type             = EXT_SLAVE_TYPE_PRESSURE,
+        .id               = PRESSURE_ID_BMA085,
+        .read_reg         = 0xF6,
+        .read_len         = 3,
+        .endian           = EXT_SLAVE_BIG_ENDIAN,
+        .range            = {0, 0},
+};
+
+static
+struct ext_slave_descr *bma085_get_slave_descr(void)
+{
+        return &bma085_descr;
+}
+
+/* Platform data for the MPU */
+struct bma085_mod_private_data {
+        struct i2c_client *client;
+        struct ext_slave_platform_data *pdata;
+};
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+
+static int bma085_mod_probe(struct i2c_client *client,
+                           const struct i2c_device_id *devid)
+{
+        struct ext_slave_platform_data *pdata;
+        struct bma085_mod_private_data *private_data;
+        int result = 0;
+
+        dev_info(&client->adapter->dev, "%s: %s\n", __func__, devid->name);
+
+        if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+                result = -ENODEV;
+                goto out_no_free;
+        }
+
+        pdata = client->dev.platform_data;
+        if (!pdata) {
+                dev_err(&client->adapter->dev,
+                        "Missing platform data for slave %s\n", devid->name);
+                result = -EFAULT;
+                goto out_no_free;
+        }
+
+        private_data = kzalloc(sizeof(*private_data), GFP_KERNEL);
+        if (!private_data) {
+                result = -ENOMEM;
+                goto out_no_free;
+        }
+
+        i2c_set_clientdata(client, private_data);
+        private_data->client = client;
+        private_data->pdata = pdata;
+
+        result = inv_mpu_register_slave(THIS_MODULE, client, pdata,
+                                        bma085_get_slave_descr);
+        if (result) {
+                dev_err(&client->adapter->dev,
+                        "Slave registration failed: %s, %d\n",
+                        devid->name, result);
+                goto out_free_memory;
+        }
+
+        return result;
+
+out_free_memory:
+        kfree(private_data);
+out_no_free:
+        dev_err(&client->adapter->dev, "%s failed %d\n", __func__, result);
+        return result;
+
+}
+
+static int bma085_mod_remove(struct i2c_client *client)
+{
+        struct bma085_mod_private_data *private_data =
+                i2c_get_clientdata(client);
+
+        dev_dbg(&client->adapter->dev, "%s\n", __func__);
+
+        inv_mpu_unregister_slave(client, private_data->pdata,
+                                bma085_get_slave_descr);
+
+        kfree(private_data);
+        return 0;
+}
+
+static const struct i2c_device_id bma085_mod_id[] = {
+        { "bma085", PRESSURE_ID_BMA085 },
+        {}
+};
+
+MODULE_DEVICE_TABLE(i2c, bma085_mod_id);
+
+static struct i2c_driver bma085_mod_driver = {
+        .class = I2C_CLASS_HWMON,
+        .probe = bma085_mod_probe,
+        .remove = bma085_mod_remove,
+        .id_table = bma085_mod_id,
+        .driver = {
+                   .owner = THIS_MODULE,
+                   .name = "bma085_mod",
+                   },
+        .address_list = normal_i2c,
+};
+
+static int __init bma085_mod_init(void)
+{
+        int res = i2c_add_driver(&bma085_mod_driver);
+        pr_info("%s: Probe name %s\n", __func__, "bma085_mod");
+        if (res)
+                pr_err("%s failed\n", __func__);
+        return res;
+}
+
+static void __exit bma085_mod_exit(void)
+{
+        pr_info("%s\n", __func__);
+        i2c_del_driver(&bma085_mod_driver);
+}
+
+module_init(bma085_mod_init);
+module_exit(bma085_mod_exit);
+
+MODULE_AUTHOR("Invensense Corporation");
+MODULE_DESCRIPTION("Driver to integrate BMA085 sensor with the MPU");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("bma085_mod");
+/**
+ *  @}
+**/