mfd: add U300 AB3100 core support

This adds a core driver for the AB3100 mixed-signal circuit
found in the ST-Ericsson U300 series platforms. This driver
is a singleton proxy for all accesses to the AB3100
sub-drivers which will be merged on top of this one, RTC,
regulators, battery and system power control, vibrator,
LEDs, and an ALSA codec.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Reviewed-by: Mike Rapoport <mike@compulab.co.il>
Reviewed-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

3 files changed, 1007 insertions, 1 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ee3927ab11e..61f0346650b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -241,6 +241,20 @@ config PCF50633_GPIO
          Say yes here if you want to include support GPIO for pins on
          the PCF50633 chip.
 
+config AB3100_CORE
+        tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+        depends on I2C
+        default y if ARCH_U300
+        help
+          Select this to enable the AB3100 Mixed Signal IC core
+          functionality. This connects to a AB3100 on the I2C bus
+          and expose a number of symbols needed for dependent devices
+          to read and write registers and subscribe to events from
+          this multi-functional IC. This is needed to use other features
+          of the AB3100 such as battery-backed RTC, charging control,
+          LEDs, vibrator, system power and temperature, power management
+          and ALSA sound.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 3afb5192e4d..f5f337143e6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
 
 obj-$(CONFIG_MFD_PCF50633)      += pcf50633-core.o
 obj-$(CONFIG_PCF50633_ADC)      += pcf50633-adc.o
-obj-$(CONFIG_PCF50633_GPIO)     += pcf50633-gpio.o
\ No newline at end of file
+obj-$(CONFIG_PCF50633_GPIO)     += pcf50633-gpio.o
+obj-$(CONFIG_AB3100_CORE)       += ab3100-core.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
new file mode 100644
index 00000000000..13e7d7bfe85
--- /dev/null
+++ b/drivers/mfd/ab3100-core.c
@@ -0,0 +1,991 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB3100 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/ab3100.h>
+
+/* These are the only registers inside AB3100 used in this main file */
+
+/* Interrupt event registers */
+#define AB3100_EVENTA1          0x21
+#define AB3100_EVENTA2          0x22
+#define AB3100_EVENTA3          0x23
+
+/* AB3100 DAC converter registers */
+#define AB3100_DIS              0x00
+#define AB3100_D0C              0x01
+#define AB3100_D1C              0x02
+#define AB3100_D2C              0x03
+#define AB3100_D3C              0x04
+
+/* Chip ID register */
+#define AB3100_CID              0x20
+
+/* AB3100 interrupt registers */
+#define AB3100_IMRA1            0x24
+#define AB3100_IMRA2            0x25
+#define AB3100_IMRA3            0x26
+#define AB3100_IMRB1            0x2B
+#define AB3100_IMRB2            0x2C
+#define AB3100_IMRB3            0x2D
+
+/* System Power Monitoring and control registers */
+#define AB3100_MCA              0x2E
+#define AB3100_MCB              0x2F
+
+/* SIM power up */
+#define AB3100_SUP              0x50
+
+/*
+ * I2C communication
+ *
+ * The AB3100 is usually assigned address 0x48 (7-bit)
+ * The chip is defined in the platform i2c_board_data section.
+ */
+static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
+I2C_CLIENT_INSMOD_1(ab3100);
+
+u8 ab3100_get_chip_type(struct ab3100 *ab3100)
+{
+        u8 chip = ABUNKNOWN;
+
+        switch (ab3100->chip_id & 0xf0) {
+        case  0xa0:
+                chip = AB3000;
+                break;
+        case  0xc0:
+                chip = AB3100;
+                break;
+        }
+        return chip;
+}
+EXPORT_SYMBOL(ab3100_get_chip_type);
+
+int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
+{
+        u8 regandval[2] = {reg, regval};
+        int err;
+
+        err = mutex_lock_interruptible(&ab3100->access_mutex);
+        if (err)
+                return err;
+
+        /*
+         * A two-byte write message with the first byte containing the register
+         * number and the second byte containing the value to be written
+         * effectively sets a register in the AB3100.
+         */
+        err = i2c_master_send(ab3100->i2c_client, regandval, 2);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (write register): %d\n",
+                        err);
+        } else if (err != 2) {
+                dev_err(ab3100->dev,
+                        "write error (write register) "
+                        "%d bytes transferred (expected 2)\n",
+                        err);
+                err = -EIO;
+        } else {
+                /* All is well */
+                err = 0;
+        }
+        mutex_unlock(&ab3100->access_mutex);
+        return 0;
+}
+EXPORT_SYMBOL(ab3100_set_register);
+
+/*
+ * The test registers exist at an I2C bus address up one
+ * from the ordinary base. They are not supposed to be used
+ * in production code, but sometimes you have to do that
+ * anyway. It's currently only used from this file so declare
+ * it static and do not export.
+ */
+static int ab3100_set_test_register(struct ab3100 *ab3100,
+                                    u8 reg, u8 regval)
+{
+        u8 regandval[2] = {reg, regval};
+        int err;
+
+        err = mutex_lock_interruptible(&ab3100->access_mutex);
+        if (err)
+                return err;
+
+        err = i2c_master_send(ab3100->testreg_client, regandval, 2);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (write test register): %d\n",
+                        err);
+        } else if (err != 2) {
+                dev_err(ab3100->dev,
+                        "write error (write test register) "
+                        "%d bytes transferred (expected 2)\n",
+                        err);
+                err = -EIO;
+        } else {
+                /* All is well */
+                err = 0;
+        }
+        mutex_unlock(&ab3100->access_mutex);
+
+        return err;
+}
+
+int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
+{
+        int err;
+
+        err = mutex_lock_interruptible(&ab3100->access_mutex);
+        if (err)
+                return err;
+
+        /*
+         * AB3100 require an I2C "stop" command between each message, else
+         * it will not work. The only way of achieveing this with the
+         * message transport layer is to send the read and write messages
+         * separately.
+         */
+        err = i2c_master_send(ab3100->i2c_client, &reg, 1);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (send register address): %d\n",
+                        err);
+                goto get_reg_out_unlock;
+        } else if (err != 1) {
+                dev_err(ab3100->dev,
+                        "write error (send register address) "
+                        "%d bytes transferred (expected 1)\n",
+                        err);
+                err = -EIO;
+                goto get_reg_out_unlock;
+        } else {
+                /* All is well */
+                err = 0;
+        }
+
+        err = i2c_master_recv(ab3100->i2c_client, regval, 1);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (read register): %d\n",
+                        err);
+                goto get_reg_out_unlock;
+        } else if (err != 1) {
+                dev_err(ab3100->dev,
+                        "write error (read register) "
+                        "%d bytes transferred (expected 1)\n",
+                        err);
+                err = -EIO;
+                goto get_reg_out_unlock;
+        } else {
+                /* All is well */
+                err = 0;
+        }
+
+ get_reg_out_unlock:
+        mutex_unlock(&ab3100->access_mutex);
+        return err;
+}
+EXPORT_SYMBOL(ab3100_get_register);
+
+int ab3100_get_register_page(struct ab3100 *ab3100,
+                             u8 first_reg, u8 *regvals, u8 numregs)
+{
+        int err;
+
+        if (ab3100->chip_id == 0xa0 ||
+            ab3100->chip_id == 0xa1)
+                /* These don't support paged reads */
+                return -EIO;
+
+        err = mutex_lock_interruptible(&ab3100->access_mutex);
+        if (err)
+                return err;
+
+        /*
+         * Paged read also require an I2C "stop" command.
+         */
+        err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (send first register address): %d\n",
+                        err);
+                goto get_reg_page_out_unlock;
+        } else if (err != 1) {
+                dev_err(ab3100->dev,
+                        "write error (send first register address) "
+                        "%d bytes transferred (expected 1)\n",
+                        err);
+                err = -EIO;
+                goto get_reg_page_out_unlock;
+        }
+
+        err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (read register page): %d\n",
+                        err);
+                goto get_reg_page_out_unlock;
+        } else if (err != numregs) {
+                dev_err(ab3100->dev,
+                        "write error (read register page) "
+                        "%d bytes transferred (expected %d)\n",
+                        err, numregs);
+                err = -EIO;
+                goto get_reg_page_out_unlock;
+        }
+
+        /* All is well */
+        err = 0;
+
+ get_reg_page_out_unlock:
+        mutex_unlock(&ab3100->access_mutex);
+        return err;
+}
+EXPORT_SYMBOL(ab3100_get_register_page);
+
+int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+                                 u8 reg, u8 andmask, u8 ormask)
+{
+        u8 regandval[2] = {reg, 0};
+        int err;
+
+        err = mutex_lock_interruptible(&ab3100->access_mutex);
+        if (err)
+                return err;
+
+        /* First read out the target register */
+        err = i2c_master_send(ab3100->i2c_client, &reg, 1);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (maskset send address): %d\n",
+                        err);
+                goto get_maskset_unlock;
+        } else if (err != 1) {
+                dev_err(ab3100->dev,
+                        "write error (maskset send address) "
+                        "%d bytes transferred (expected 1)\n",
+                        err);
+                err = -EIO;
+                goto get_maskset_unlock;
+        }
+
+        err = i2c_master_recv(ab3100->i2c_client, &regandval[1], 1);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (maskset read register): %d\n",
+                        err);
+                goto get_maskset_unlock;
+        } else if (err != 1) {
+                dev_err(ab3100->dev,
+                        "write error (maskset read register) "
+                        "%d bytes transferred (expected 1)\n",
+                        err);
+                err = -EIO;
+                goto get_maskset_unlock;
+        }
+
+        /* Modify the register */
+        regandval[1] &= andmask;
+        regandval[1] |= ormask;
+
+        /* Write the register */
+        err = i2c_master_send(ab3100->i2c_client, regandval, 2);
+        if (err < 0) {
+                dev_err(ab3100->dev,
+                        "write error (write register): %d\n",
+                        err);
+                goto get_maskset_unlock;
+        } else if (err != 2) {
+                dev_err(ab3100->dev,
+                        "write error (write register) "
+                        "%d bytes transferred (expected 2)\n",
+                        err);
+                err = -EIO;
+                goto get_maskset_unlock;
+        }
+
+        /* All is well */
+        err = 0;
+
+ get_maskset_unlock:
+        mutex_unlock(&ab3100->access_mutex);
+        return err;
+}
+EXPORT_SYMBOL(ab3100_mask_and_set_register);
+
+/*
+ * Register a simple callback for handling any AB3100 events.
+ */
+int ab3100_event_register(struct ab3100 *ab3100,
+                          struct notifier_block *nb)
+{
+        return blocking_notifier_chain_register(&ab3100->event_subscribers,
+                                               nb);
+}
+EXPORT_SYMBOL(ab3100_event_register);
+
+/*
+ * Remove a previously registered callback.
+ */
+int ab3100_event_unregister(struct ab3100 *ab3100,
+                            struct notifier_block *nb)
+{
+  return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
+                                            nb);
+}
+EXPORT_SYMBOL(ab3100_event_unregister);
+
+
+int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
+                                             u32 *fatevent)
+{
+        if (!ab3100->startup_events_read)
+                return -EAGAIN; /* Try again later */
+        *fatevent = ab3100->startup_events;
+        return 0;
+}
+EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
+
+/* Interrupt handling worker */
+static void ab3100_work(struct work_struct *work)
+{
+        struct ab3100 *ab3100 = container_of(work, struct ab3100, work);
+        u8 event_regs[3];
+        u32 fatevent;
+        int err;
+
+        err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
+                                       event_regs, 3);
+        if (err)
+                goto err_event_wq;
+
+        fatevent = (event_regs[0] << 16) |
+                (event_regs[1] << 8) |
+                event_regs[2];
+
+        if (!ab3100->startup_events_read) {
+                ab3100->startup_events = fatevent;
+                ab3100->startup_events_read = true;
+        }
+        /*
+         * The notified parties will have to mask out the events
+         * they're interested in and react to them. They will be
+         * notified on all events, then they use the fatevent value
+         * to determine if they're interested.
+         */
+        blocking_notifier_call_chain(&ab3100->event_subscribers,
+                                     fatevent, NULL);
+
+        dev_dbg(ab3100->dev,
+                "IRQ Event: 0x%08x\n", fatevent);
+
+        /* By now the IRQ should be acked and deasserted so enable it again */
+        enable_irq(ab3100->i2c_client->irq);
+        return;
+
+ err_event_wq:
+        dev_dbg(ab3100->dev,
+                "error in event workqueue\n");
+        /* Enable the IRQ anyway, what choice do we have? */
+        enable_irq(ab3100->i2c_client->irq);
+        return;
+}
+
+static irqreturn_t ab3100_irq_handler(int irq, void *data)
+{
+        struct ab3100 *ab3100 = data;
+        /*
+         * Disable the IRQ and dispatch a worker to handle the
+         * event. Since the chip resides on I2C this is slow
+         * stuff and we will re-enable the interrupts once th
+         * worker has finished.
+         */
+        disable_irq(ab3100->i2c_client->irq);
+        schedule_work(&ab3100->work);
+        return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * Some debugfs entries only exposed if we're using debug
+ */
+static int ab3100_registers_print(struct seq_file *s, void *p)
+{
+        struct ab3100 *ab3100 = s->private;
+        u8 value;
+        u8 reg;
+
+        seq_printf(s, "AB3100 registers:\n");
+
+        for (reg = 0; reg < 0xff; reg++) {
+                ab3100_get_register(ab3100, reg, &value);
+                seq_printf(s, "[0x%x]:  0x%x\n", reg, value);
+        }
+        return 0;
+}
+
+static int ab3100_registers_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, ab3100_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab3100_registers_fops = {
+        .open = ab3100_registers_open,
+        .read = seq_read,
+        .llseek = seq_lseek,
+        .release = single_release,
+        .owner = THIS_MODULE,
+};
+
+struct ab3100_get_set_reg_priv {
+        struct ab3100 *ab3100;
+        bool mode;
+};
+
+static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
+{
+        file->private_data = inode->i_private;
+        return 0;
+}
+
+static int ab3100_get_set_reg(struct file *file,
+                              const char __user *user_buf,
+                              size_t count, loff_t *ppos)
+{
+        struct ab3100_get_set_reg_priv *priv = file->private_data;
+        struct ab3100 *ab3100 = priv->ab3100;
+        char buf[32];
+        int buf_size;
+        int regp;
+        unsigned long user_reg;
+        int err;
+        int i = 0;
+
+        /* Get userspace string and assure termination */
+        buf_size = min(count, (sizeof(buf)-1));
+        if (copy_from_user(buf, user_buf, buf_size))
+                return -EFAULT;
+        buf[buf_size] = 0;
+
+        /*
+         * The idea is here to parse a string which is either
+         * "0xnn" for reading a register, or "0xaa 0xbb" for
+         * writing 0xbb to the register 0xaa. First move past
+         * whitespace and then begin to parse the register.
+         */
+        while ((i < buf_size) && (buf[i] == ' '))
+                i++;
+        regp = i;
+
+        /*
+         * Advance pointer to end of string then terminate
+         * the register string. This is needed to satisfy
+         * the strict_strtoul() function.
+         */
+        while ((i < buf_size) && (buf[i] != ' '))
+                i++;
+        buf[i] = '\0';
+
+        err = strict_strtoul(&buf[regp], 16, &user_reg);
+        if (err)
+                return err;
+        if (user_reg > 0xff)
+                return -EINVAL;
+
+        /* Either we read or we write a register here */
+        if (!priv->mode) {
+                /* Reading */
+                u8 reg = (u8) user_reg;
+                u8 regvalue;
+
+                ab3100_get_register(ab3100, reg, &regvalue);
+
+                dev_info(ab3100->dev,
+                         "debug read AB3100 reg[0x%02x]: 0x%02x\n",
+                         reg, regvalue);
+        } else {
+                int valp;
+                unsigned long user_value;
+                u8 reg = (u8) user_reg;
+                u8 value;
+                u8 regvalue;
+
+                /*
+                 * Writing, we need some value to write to
+                 * the register so keep parsing the string
+                 * from userspace.
+                 */
+                i++;
+                while ((i < buf_size) && (buf[i] == ' '))
+                        i++;
+                valp = i;
+                while ((i < buf_size) && (buf[i] != ' '))
+                        i++;
+                buf[i] = '\0';
+
+                err = strict_strtoul(&buf[valp], 16, &user_value);
+                if (err)
+                        return err;
+                if (user_reg > 0xff)
+                        return -EINVAL;
+
+                value = (u8) user_value;
+                ab3100_set_register(ab3100, reg, value);
+                ab3100_get_register(ab3100, reg, &regvalue);
+
+                dev_info(ab3100->dev,
+                         "debug write reg[0x%02x] with 0x%02x, "
+                         "after readback: 0x%02x\n",
+                         reg, value, regvalue);
+        }
+        return buf_size;
+}
+
+static const struct file_operations ab3100_get_set_reg_fops = {
+        .open = ab3100_get_set_reg_open_file,
+        .write = ab3100_get_set_reg,
+};
+
+static struct dentry *ab3100_dir;
+static struct dentry *ab3100_reg_file;
+static struct ab3100_get_set_reg_priv ab3100_get_priv;
+static struct dentry *ab3100_get_reg_file;
+static struct ab3100_get_set_reg_priv ab3100_set_priv;
+static struct dentry *ab3100_set_reg_file;
+
+static void ab3100_setup_debugfs(struct ab3100 *ab3100)
+{
+        int err;
+
+        ab3100_dir = debugfs_create_dir("ab3100", NULL);
+        if (!ab3100_dir)
+                goto exit_no_debugfs;
+
+        ab3100_reg_file = debugfs_create_file("registers",
+                                S_IRUGO, ab3100_dir, ab3100,
+                                &ab3100_registers_fops);
+        if (!ab3100_reg_file) {
+                err = -ENOMEM;
+                goto exit_destroy_dir;
+        }
+
+        ab3100_get_priv.ab3100 = ab3100;
+        ab3100_get_priv.mode = false;
+        ab3100_get_reg_file = debugfs_create_file("get_reg",
+                                S_IWUGO, ab3100_dir, &ab3100_get_priv,
+                                &ab3100_get_set_reg_fops);
+        if (!ab3100_get_reg_file) {
+                err = -ENOMEM;
+                goto exit_destroy_reg;
+        }
+
+        ab3100_set_priv.ab3100 = ab3100;
+        ab3100_set_priv.mode = true;
+        ab3100_set_reg_file = debugfs_create_file("set_reg",
+                                S_IWUGO, ab3100_dir, &ab3100_set_priv,
+                                &ab3100_get_set_reg_fops);
+        if (!ab3100_set_reg_file) {
+                err = -ENOMEM;
+                goto exit_destroy_get_reg;
+        }
+        return;
+
+ exit_destroy_get_reg:
+        debugfs_remove(ab3100_get_reg_file);
+ exit_destroy_reg:
+        debugfs_remove(ab3100_reg_file);
+ exit_destroy_dir:
+        debugfs_remove(ab3100_dir);
+ exit_no_debugfs:
+        return;
+}
+static inline void ab3100_remove_debugfs(void)
+{
+        debugfs_remove(ab3100_set_reg_file);
+        debugfs_remove(ab3100_get_reg_file);
+        debugfs_remove(ab3100_reg_file);
+        debugfs_remove(ab3100_dir);
+}
+#else
+static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
+{
+}
+static inline void ab3100_remove_debugfs(void)
+{
+}
+#endif
+
+/*
+ * Basic set-up, datastructure creation/destruction and I2C interface.
+ * This sets up a default config in the AB3100 chip so that it
+ * will work as expected.
+ */
+
+struct ab3100_init_setting {
+        u8 abreg;
+        u8 setting;
+};
+
+static const struct ab3100_init_setting __initdata
+ab3100_init_settings[] = {
+        {
+                .abreg = AB3100_MCA,
+                .setting = 0x01
+        }, {
+                .abreg = AB3100_MCB,
+                .setting = 0x30
+        }, {
+                .abreg = AB3100_IMRA1,
+                .setting = 0x00
+        }, {
+                .abreg = AB3100_IMRA2,
+                .setting = 0xFF
+        }, {
+                .abreg = AB3100_IMRA3,
+                .setting = 0x01
+        }, {
+                .abreg = AB3100_IMRB1,
+                .setting = 0xFF
+        }, {
+                .abreg = AB3100_IMRB2,
+                .setting = 0xFF
+        }, {
+                .abreg = AB3100_IMRB3,
+                .setting = 0xFF
+        }, {
+                .abreg = AB3100_SUP,
+                .setting = 0x00
+        }, {
+                .abreg = AB3100_DIS,
+                .setting = 0xF0
+        }, {
+                .abreg = AB3100_D0C,
+                .setting = 0x00
+        }, {
+                .abreg = AB3100_D1C,
+                .setting = 0x00
+        }, {
+                .abreg = AB3100_D2C,
+                .setting = 0x00
+        }, {
+                .abreg = AB3100_D3C,
+                .setting = 0x00
+        },
+};
+
+static int __init ab3100_setup(struct ab3100 *ab3100)
+{
+        int err = 0;
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
+                err = ab3100_set_register(ab3100,
+                                          ab3100_init_settings[i].abreg,
+                                          ab3100_init_settings[i].setting);
+                if (err)
+                        goto exit_no_setup;
+        }
+
+        /*
+         * Special trick to make the AB3100 use the 32kHz clock (RTC)
+         * bit 3 in test registe 0x02 is a special, undocumented test
+         * register bit that only exist in AB3100 P1E
+         */
+        if (ab3100->chip_id == 0xc4) {
+                dev_warn(ab3100->dev,
+                         "AB3100 P1E variant detected, "
+                         "forcing chip to 32KHz\n");
+                err = ab3100_set_test_register(ab3100, 0x02, 0x08);
+        }
+
+ exit_no_setup:
+        return err;
+}
+
+/*
+ * Here we define all the platform devices that appear
+ * as children of the AB3100. These are regular platform
+ * devices with the IORESOURCE_IO .start and .end set
+ * to correspond to the internal AB3100 register range
+ * mapping to the corresponding subdevice.
+ */
+
+#define AB3100_DEVICE(devname, devid)                           \
+static struct platform_device ab3100_##devname##_device = {     \
+        .name           = devid,                                \
+        .id             = -1,                                   \
+}
+
+/*
+ * This lists all the subdevices and corresponding register
+ * ranges.
+ */
+AB3100_DEVICE(dac, "ab3100-dac");
+AB3100_DEVICE(leds, "ab3100-leds");
+AB3100_DEVICE(power, "ab3100-power");
+AB3100_DEVICE(regulators, "ab3100-regulators");
+AB3100_DEVICE(sim, "ab3100-sim");
+AB3100_DEVICE(uart, "ab3100-uart");
+AB3100_DEVICE(rtc, "ab3100-rtc");
+AB3100_DEVICE(charger, "ab3100-charger");
+AB3100_DEVICE(boost, "ab3100-boost");
+AB3100_DEVICE(adc, "ab3100-adc");
+AB3100_DEVICE(fuelgauge, "ab3100-fuelgauge");
+AB3100_DEVICE(vibrator, "ab3100-vibrator");
+AB3100_DEVICE(otp, "ab3100-otp");
+AB3100_DEVICE(codec, "ab3100-codec");
+
+static struct platform_device *
+ab3100_platform_devs[] = {
+        &ab3100_dac_device,
+        &ab3100_leds_device,
+        &ab3100_power_device,
+        &ab3100_regulators_device,
+        &ab3100_sim_device,
+        &ab3100_uart_device,
+        &ab3100_rtc_device,
+        &ab3100_charger_device,
+        &ab3100_boost_device,
+        &ab3100_adc_device,
+        &ab3100_fuelgauge_device,
+        &ab3100_vibrator_device,
+        &ab3100_otp_device,
+        &ab3100_codec_device,
+};
+
+struct ab_family_id {
+        u8      id;
+        char    *name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+        /* AB3100 */
+        {
+                .id = 0xc0,
+                .name = "P1A"
+        }, {
+                .id = 0xc1,
+                .name = "P1B"
+        }, {
+                .id = 0xc2,
+                .name = "P1C"
+        }, {
+                .id = 0xc3,
+                .name = "P1D"
+        }, {
+                .id = 0xc4,
+                .name = "P1E"
+        }, {
+                .id = 0xc5,
+                .name = "P1F/R1A"
+        }, {
+                .id = 0xc6,
+                .name = "P1G/R1A"
+        }, {
+                .id = 0xc7,
+                .name = "P2A/R2A"
+        }, {
+                .id = 0xc8,
+                .name = "P2B/R2B"
+        },
+        /* AB3000 variants, not supported */
+        {
+                .id = 0xa0
+        }, {
+                .id = 0xa1
+        }, {
+                .id = 0xa2
+        }, {
+                .id = 0xa3
+        }, {
+                .id = 0xa4
+        }, {
+                .id = 0xa5
+        }, {
+                .id = 0xa6
+        }, {
+                .id = 0xa7
+        },
+        /* Terminator */
+        {
+                .id = 0x00,
+        },
+};
+
+static int __init ab3100_probe(struct i2c_client *client,
+                        const struct i2c_device_id *id)
+{
+        struct ab3100 *ab3100;
+        int err;
+        int i;
+
+        ab3100 = kzalloc(sizeof(struct ab3100), GFP_KERNEL);
+        if (!ab3100) {
+                dev_err(&client->dev, "could not allocate AB3100 device\n");
+                return -ENOMEM;
+        }
+
+        /* Initialize data structure */
+        mutex_init(&ab3100->access_mutex);
+        BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
+
+        ab3100->i2c_client = client;
+        ab3100->dev = &ab3100->i2c_client->dev;
+
+        i2c_set_clientdata(client, ab3100);
+
+        /* Read chip ID register */
+        err = ab3100_get_register(ab3100, AB3100_CID,
+                                  &ab3100->chip_id);
+        if (err) {
+                dev_err(&client->dev,
+                        "could not communicate with the AB3100 analog "
+                        "baseband chip\n");
+                goto exit_no_detect;
+        }
+
+        for (i = 0; ids[i].id != 0x0; i++) {
+                if (ids[i].id == ab3100->chip_id) {
+                        if (ids[i].name != NULL) {
+                                snprintf(&ab3100->chip_name[0],
+                                         sizeof(ab3100->chip_name) - 1,
+                                         "AB3100 %s",
+                                         ids[i].name);
+                                break;
+                        } else {
+                                dev_err(&client->dev,
+                                        "AB3000 is not supported\n");
+                                goto exit_no_detect;
+                        }
+                }
+        }
+
+        if (ids[i].id == 0x0) {
+                dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
+                        ab3100->chip_id);
+                dev_err(&client->dev, "accepting it anyway. Please update "
+                        "the driver.\n");
+                goto exit_no_detect;
+        }
+
+        dev_info(&client->dev, "Detected chip: %s\n",
+                 &ab3100->chip_name[0]);
+
+        /* Attach a second dummy i2c_client to the test register address */
+        ab3100->testreg_client = i2c_new_dummy(client->adapter,
+                                                     client->addr + 1);
+        if (!ab3100->testreg_client) {
+                err = -ENOMEM;
+                goto exit_no_testreg_client;
+        }
+
+        strlcpy(ab3100->testreg_client->name, id->name,
+                sizeof(ab3100->testreg_client->name));
+
+        err = ab3100_setup(ab3100);
+        if (err)
+                goto exit_no_setup;
+
+        INIT_WORK(&ab3100->work, ab3100_work);
+
+        /* This real unpredictable IRQ is of course sampled for entropy */
+        err = request_irq(client->irq, ab3100_irq_handler,
+                          IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+                          "AB3100 IRQ", ab3100);
+        if (err)
+                goto exit_no_irq;
+
+        /* Set parent and a pointer back to the container in device data */
+        for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
+                ab3100_platform_devs[i]->dev.parent =
+                        &client->dev;
+                platform_set_drvdata(ab3100_platform_devs[i], ab3100);
+        }
+
+        /* Register the platform devices */
+        platform_add_devices(ab3100_platform_devs,
+                             ARRAY_SIZE(ab3100_platform_devs));
+
+        ab3100_setup_debugfs(ab3100);
+
+        return 0;
+
+ exit_no_irq:
+ exit_no_setup:
+        i2c_unregister_device(ab3100->testreg_client);
+ exit_no_testreg_client:
+ exit_no_detect:
+        kfree(ab3100);
+        return err;
+}
+
+static int __exit ab3100_remove(struct i2c_client *client)
+{
+        struct ab3100 *ab3100 = i2c_get_clientdata(client);
+        int i;
+
+        /* Unregister subdevices */
+        for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++)
+                platform_device_unregister(ab3100_platform_devs[i]);
+
+        ab3100_remove_debugfs();
+        i2c_unregister_device(ab3100->testreg_client);
+
+        /*
+         * At this point, all subscribers should have unregistered
+         * their notifiers so deactivate IRQ
+         */
+        free_irq(client->irq, ab3100);
+        kfree(ab3100);
+        return 0;
+}
+
+static const struct i2c_device_id ab3100_id[] = {
+        { "ab3100", ab3100 },
+        { }
+};
+MODULE_DEVICE_TABLE(i2c, ab3100_id);
+
+static struct i2c_driver ab3100_driver = {
+        .driver = {
+                .name   = "ab3100",
+                .owner  = THIS_MODULE,
+        },
+        .id_table       = ab3100_id,
+        .probe          = ab3100_probe,
+        .remove         = __exit_p(ab3100_remove),
+};
+
+static int __init ab3100_i2c_init(void)
+{
+        return i2c_add_driver(&ab3100_driver);
+}
+
+static void __exit ab3100_i2c_exit(void)
+{
+        i2c_del_driver(&ab3100_driver);
+}
+
+subsys_initcall(ab3100_i2c_init);
+module_exit(ab3100_i2c_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 core driver");
+MODULE_LICENSE("GPL");