ide/Kconfig: use 'on-board' instead of 'built-in' in config options

To avoid confusion between 'built-in' drivers and 'on-board'
controllers, consistently use the term 'on-board' for controllers.

Minor line-wrapping improvements in descriptions for config options.

[ Bart: thanks to Jan for 'built-in'->'on-board' suggestion ]

Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 23 insertions, 23 deletions

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 64df55e20ab..92b01170d8f 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -617,8 +617,8 @@ config BLK_DEV_SC1200
         tristate "National SCx200 chipset support"
         select BLK_DEV_IDEDMA_PCI
         help
-          This driver adds support for the built in IDE on the National
-          SCx200 series of embedded x86 "Geode" systems
+          This driver adds support for the on-board IDE controller on the
+          National SCx200 series of embedded x86 "Geode" systems.
 
 config BLK_DEV_PIIX
         tristate "Intel PIIXn chipsets support"
@@ -793,22 +793,22 @@ config BLK_DEV_CELLEB
         depends on PPC_CELLEB
         select BLK_DEV_IDEDMA_PCI
         help
-          This driver provides support for the built-in IDE controller on
+          This driver provides support for the on-board IDE controller on
           Toshiba Cell Reference Board.
           If unsure, say Y.
 
 endif
 
 config BLK_DEV_IDE_PMAC
-        tristate "Builtin PowerMac IDE support"
+        tristate "PowerMac on-board IDE support"
         depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
         help
-          This driver provides support for the built-in IDE controller on
+          This driver provides support for the on-board IDE controller on
           most of the recent Apple Power Macintoshes and PowerBooks.
           If unsure, say Y.
 
 config BLK_DEV_IDE_PMAC_ATA100FIRST
-        bool "Probe internal ATA/100 (Kauai) first"
+        bool "Probe on-board ATA/100 (Kauai) first"
         depends on BLK_DEV_IDE_PMAC
         help
           This option will cause the ATA/100 controller found in UniNorth2
@@ -823,7 +823,7 @@ config BLK_DEV_IDEDMA_PMAC
         depends on BLK_DEV_IDE_PMAC
         select BLK_DEV_IDEDMA_PCI
         help
-          This option allows the driver for the built-in IDE controller on
+          This option allows the driver for the on-board IDE controller on
           Power Macintoshes and PowerBooks to use DMA (direct memory access)
           to transfer data to and from memory.  Saying Y is safe and improves
           performance.
@@ -934,7 +934,7 @@ config BLK_DEV_GAYLE
         help
           This is the IDE driver for the Amiga Gayle IDE interface. It supports
           both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
-          This includes builtin IDE interfaces on some Amiga models (A600,
+          This includes on-board IDE interfaces on some Amiga models (A600,
           A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
           bus (M-Tech E-Matrix 530 expansion card).
           Say Y if you have an Amiga with a Gayle IDE interface and want to use
@@ -948,10 +948,10 @@ config BLK_DEV_IDEDOUBLER
         depends on BLK_DEV_GAYLE && EXPERIMENTAL
         ---help---
           This driver provides support for the so-called `IDE doublers' (made
-          by various manufacturers, e.g. Eyetech) that can be connected to the
-          builtin IDE interface of some Amiga models. Using such an IDE
-          doubler, you can connect up to four instead of two IDE devices on
-          the Amiga's builtin IDE interface.
+          by various manufacturers, e.g. Eyetech) that can be connected to
+          the on-board IDE interface of some Amiga models. Using such an IDE
+          doubler, you can connect up to four instead of two IDE devices to
+          the Amiga's on-board IDE interface.
 
           Note that the normal Amiga Gayle IDE driver may not work correctly
           if you have an IDE doubler and don't enable this driver!
@@ -963,9 +963,9 @@ config BLK_DEV_BUDDHA
         tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
         depends on ZORRO && EXPERIMENTAL
         help
-          This is the IDE driver for the IDE interfaces on the Buddha, 
-          Catweasel and X-Surf expansion boards.  It supports up to two interfaces 
-          on the Buddha, three on the Catweasel and two on the X-Surf.
+          This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
+          and X-Surf expansion boards.  It supports up to two interfaces on the
+          Buddha, three on the Catweasel and two on the X-Surf.
 
           Say Y if you have a Buddha or Catweasel expansion board and want to
           use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
@@ -975,23 +975,23 @@ config BLK_DEV_FALCON_IDE
         tristate "Falcon IDE interface support"
         depends on ATARI
         help
-          This is the IDE driver for the builtin IDE interface on the Atari
+          This is the IDE driver for the on-board IDE interface on the Atari
           Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
-          disks, CD-ROM drives, etc.) that are connected to the builtin IDE
+          disks, CD-ROM drives, etc.) that are connected to the on-board IDE
           interface.
 
 config BLK_DEV_MAC_IDE
         tristate "Macintosh Quadra/Powerbook IDE interface support"
         depends on MAC
         help
-          This is the IDE driver for the builtin IDE interface on some m68k
+          This is the IDE driver for the on-board IDE interface on some m68k
           Macintosh models. It supports both the `Quadra style' (used in
           Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
           (used in the Powerbook 150 and 190 models) IDE interface.
 
           Say Y if you have such an Macintosh model and want to use IDE
           devices (hard disks, CD-ROM drives, etc.) that are connected to the
-          builtin IDE interface.
+          on-board IDE interface.
 
 config BLK_DEV_Q40IDE
         tristate "Q40/Q60 IDE interface support"
@@ -1062,8 +1062,8 @@ config BLK_DEV_ALI14XX
           boot parameter.  It enables support for the secondary IDE interface
           of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
           I/O speeds to be set as well.  See the files
-          <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> for
-          more info.
+          <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c>
+          for more info.
 
 config BLK_DEV_DTC2278
         tristate "DTC-2278 support"
@@ -1088,8 +1088,8 @@ config BLK_DEV_QD65XX
         help
           This driver is enabled at runtime using the "qd65xx.probe" kernel
           boot parameter.  It permits faster I/O speeds to be set.  See the
-          <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for
-          more info.
+          <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+          for more info.
 
 config BLK_DEV_UMC8672
         tristate "UMC-8672 support"