pcmcia: do not use io_req_t after call to pcmcia_request_io()

After pcmcia_request_io(), do not make use of the values stored in
io_req_t, but instead use those found in struct pcmcia_device->resource[].

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 4 insertions, 4 deletions

diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 457b603f867..8ab494c0c17 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -188,7 +188,7 @@ static void bt3c_write_wakeup(bt3c_info_t *info)
                 return;
 
         do {
-                register unsigned int iobase = info->p_dev->io.BasePort1;
+                register unsigned int iobase = info->p_dev->resource[0]->start;
                 register struct sk_buff *skb;
                 register int len;
 
@@ -226,7 +226,7 @@ static void bt3c_receive(bt3c_info_t *info)
                 return;
         }
 
-        iobase = info->p_dev->io.BasePort1;
+        iobase = info->p_dev->resource[0]->start;
 
         avail = bt3c_read(iobase, 0x7006);
         //printk("bt3c_cs: receiving %d bytes\n", avail);
@@ -347,7 +347,7 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
                 /* our irq handler is shared */
                 return IRQ_NONE;
 
-        iobase = info->p_dev->io.BasePort1;
+        iobase = info->p_dev->resource[0]->start;
 
         spin_lock(&(info->lock));
 
@@ -480,7 +480,7 @@ static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware,
         unsigned int iobase, size, addr, fcs, tmp;
         int i, err = 0;
 
-        iobase = info->p_dev->io.BasePort1;
+        iobase = info->p_dev->resource[0]->start;
 
         /* Reset */
         bt3c_io_write(iobase, 0x8040, 0x0404);