libata: improve SATA PHY speed down logic

sata_down_spd_limit() first reads the current SPD from SStatus and
limit the speed to the lower one of one below the current limit or one
below the current SPD in SStatus.  SPD may not be accessible or valid
when SPD down is requested making sata_down_spd_limit() fail when it's
most needed.

This patch makes the current SPD cached after each successful reset
and forces GEN I speed (1.5Gbps) if neither of SStatus or the cached
value is valid, so sata_down_spd_limit() is now guaranteed to lower
the speed limit if lower speed is available.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 6 insertions, 0 deletions

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 19f9947bd96..183eaf466d4 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1799,12 +1799,18 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
         }
 
         if (rc == 0) {
+                u32 sstatus;
+
                 /* After the reset, the device state is PIO 0 and the
                  * controller state is undefined.  Record the mode.
                  */
                 for (i = 0; i < ATA_MAX_DEVICES; i++)
                         ap->device[i].pio_mode = XFER_PIO_0;
 
+                /* record current link speed */
+                if (sata_scr_read(ap, SCR_STATUS, &sstatus) == 0)
+                        ap->sata_spd = (sstatus >> 4) & 0xf;
+
                 if (postreset)
                         postreset(ap, classes);