bzip2/lzma: x86 kernel compression support

Impact: Replaces x86 kernel decompressor with new code

This is the third part of the bzip2/lzma patch

The bzip patch is based on an idea by Christian Ludwig, includes support for
compressing the kernel with bzip2 or lzma rather than gzip. Both
compressors give smaller sizes than gzip.  Lzma's decompresses faster
than bzip2.

It also supports ramdisks and initramfs' compressed using these two
compressors.

The functionality has been successfully used for a couple of years by
the udpcast project

This version applies to "tip" kernel 2.6.28

This part contains:
- support for new bzip2 and lzma kernel compression for x86

Signed-off-by: Alain Knaff <alain@knaff.lu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

2 files changed, 33 insertions, 106 deletions

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 1771c804e02..3ca4c194b8e 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head_$(BITS).o misc.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -47,18 +47,35 @@ ifeq ($(CONFIG_X86_32),y)
 ifdef CONFIG_RELOCATABLE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
         $(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
+        $(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
+        $(call if_changed,lzma)
 else
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
         $(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+        $(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+        $(call if_changed,lzma)
 endif
 LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
 
 else
+
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
         $(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+        $(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+        $(call if_changed,lzma)
 
 LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
 endif
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+suffix_$(CONFIG_KERNEL_GZIP)  = gz
+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
+suffix_$(CONFIG_KERNEL_LZMA)  = lzma
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
         $(call if_changed,ld)
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index da062216948..e45be73684f 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -116,71 +116,13 @@
 /*
  * gzip declarations
  */
-
-#define OF(args)        args
 #define STATIC          static
 
 #undef memset
 #undef memcpy
 #define memzero(s, n)   memset((s), 0, (n))
 
-typedef unsigned char   uch;
-typedef unsigned short  ush;
-typedef unsigned long   ulg;
-
-/*
- * Window size must be at least 32k, and a power of two.
- * We don't actually have a window just a huge output buffer,
- * so we report a 2G window size, as that should always be
- * larger than our output buffer:
- */
-#define WSIZE           0x80000000
-
-/* Input buffer: */
-static unsigned char    *inbuf;
-
-/* Sliding window buffer (and final output buffer): */
-static unsigned char    *window;
-
-/* Valid bytes in inbuf: */
-static unsigned         insize;
-
-/* Index of next byte to be processed in inbuf: */
-static unsigned         inptr;
-
-/* Bytes in output buffer: */
-static unsigned         outcnt;
-
-/* gzip flag byte */
-#define ASCII_FLAG      0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION    0x02 /* bit 1 set: continuation of multi-part gz file */
-#define EXTRA_FIELD     0x04 /* bit 2 set: extra field present */
-#define ORIG_NAM        0x08 /* bit 3 set: original file name present */
-#define COMMENT         0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED       0x20 /* bit 5 set: file is encrypted */
-#define RESERVED        0xC0 /* bit 6, 7:  reserved */
-
-#define get_byte()      (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) do { if (!(cond)) error(msg); } while (0)
-#  define Trace(x)      do { fprintf x; } while (0)
-#  define Tracev(x)     do { if (verbose) fprintf x ; } while (0)
-#  define Tracevv(x)    do { if (verbose > 1) fprintf x ; } while (0)
-#  define Tracec(c, x)  do { if (verbose && (c)) fprintf x ; } while (0)
-#  define Tracecv(c, x) do { if (verbose > 1 && (c)) fprintf x ; } while (0)
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
 
-static int  fill_inbuf(void);
-static void flush_window(void);
 static void error(char *m);
 
 /*
@@ -189,13 +131,8 @@ static void error(char *m);
 static struct boot_params *real_mode;           /* Pointer to real-mode data */
 static int quiet;
 
-extern unsigned char input_data[];
-extern int input_len;
-
-static long bytes_out;
-
 static void *memset(void *s, int c, unsigned n);
-static void *memcpy(void *dest, const void *src, unsigned n);
+void *memcpy(void *dest, const void *src, unsigned n);
 
 static void __putstr(int, const char *);
 #define putstr(__x)  __putstr(0, __x)
@@ -213,7 +150,17 @@ static char *vidmem;
 static int vidport;
 static int lines, cols;
 
-#include "../../../../lib/inflate.c"
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
 
 static void scroll(void)
 {
@@ -282,7 +229,7 @@ static void *memset(void *s, int c, unsigned n)
         return s;
 }
 
-static void *memcpy(void *dest, const void *src, unsigned n)
+void *memcpy(void *dest, const void *src, unsigned n)
 {
         int i;
         const char *s = src;
@@ -293,38 +240,6 @@ static void *memcpy(void *dest, const void *src, unsigned n)
         return dest;
 }
 
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-        error("ran out of input data");
-        return 0;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-        /* With my window equal to my output buffer
-         * I only need to compute the crc here.
-         */
-        unsigned long c = crc;         /* temporary variable */
-        unsigned n;
-        unsigned char *in, ch;
-
-        in = window;
-        for (n = 0; n < outcnt; n++) {
-                ch = *in++;
-                c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-        }
-        crc = c;
-        bytes_out += (unsigned long)outcnt;
-        outcnt = 0;
-}
 
 static void error(char *x)
 {
@@ -407,12 +322,8 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
         lines = real_mode->screen_info.orig_video_lines;
         cols = real_mode->screen_info.orig_video_cols;
 
-        window = output;                /* Output buffer (Normally at 1M) */
         free_mem_ptr     = heap;        /* Heap */
         free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
-        inbuf  = input_data;            /* Input buffer */
-        insize = input_len;
-        inptr  = 0;
 
 #ifdef CONFIG_X86_64
         if ((unsigned long)output & (__KERNEL_ALIGN - 1))
@@ -430,10 +341,9 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 #endif
 #endif
 
-        makecrc();
         if (!quiet)
                 putstr("\nDecompressing Linux... ");
-        gunzip();
+        decompress(input_data, input_len, NULL, NULL, output, NULL, error);
         parse_elf(output);
         if (!quiet)
                 putstr("done.\nBooting the kernel.\n");