Merge branch 'for-linus' of git://www.jni.nu/cris

* 'for-linus' of git://www.jni.nu/cris:
  Correct auto-restart of syscalls via restartblock
  CRISv10: Fix return before mutex_unlock in pcf8563
  Drop the CRISv32 version of pcf8563

2 files changed, 0 insertions, 378 deletions

diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile
index e8c02437eda..39aa3c117a8 100644
--- a/arch/cris/arch-v32/drivers/Makefile
+++ b/arch/cris/arch-v32/drivers/Makefile
@@ -7,7 +7,6 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP)        += axisflashmap.o
 obj-$(CONFIG_ETRAXFS)                   += mach-fs/
 obj-$(CONFIG_CRIS_MACH_ARTPEC3)         += mach-a3/
 obj-$(CONFIG_ETRAX_IOP_FW_LOAD)         += iop_fw_load.o
-obj-$(CONFIG_ETRAX_PCF8563)             += pcf8563.o
 obj-$(CONFIG_ETRAX_I2C)                 += i2c.o
 obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL)  += sync_serial.o
 obj-$(CONFIG_PCI)                       += pci/
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
deleted file mode 100644
index b6e4fc0aad4..00000000000
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * PCF8563 RTC
- *
- * From Phillips' datasheet:
- *
- * The PCF8563 is a CMOS real-time clock/calendar optimized for low power
- * consumption. A programmable clock output, interrupt output and voltage
- * low detector are also provided. All address and data are transferred
- * serially via two-line bidirectional I2C-bus. Maximum bus speed is
- * 400 kbits/s. The built-in word address register is incremented
- * automatically after each written or read byte.
- *
- * Copyright (c) 2002-2007, Axis Communications AB
- * All rights reserved.
- *
- * Author: Tobias Anderberg <tobiasa@axis.com>.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/ioctl.h>
-#include <linux/delay.h>
-#include <linux/bcd.h>
-#include <linux/mutex.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-
-#include "i2c.h"
-
-#define PCF8563_MAJOR   121     /* Local major number. */
-#define DEVICE_NAME     "rtc"   /* Name which is registered in /proc/devices. */
-#define PCF8563_NAME    "PCF8563"
-#define DRIVER_VERSION  "$Revision: 1.17 $"
-
-/* Two simple wrapper macros, saves a few keystrokes. */
-#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
-#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
-
-static DEFINE_MUTEX(pcf8563_mutex);
-static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
-
-static const unsigned char days_in_month[] =
-        { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
-static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
-
-/* Cache VL bit value read at driver init since writing the RTC_SECOND
- * register clears the VL status.
- */
-static int voltage_low;
-
-static const struct file_operations pcf8563_fops = {
-        .owner          = THIS_MODULE,
-        .unlocked_ioctl = pcf8563_unlocked_ioctl,
-        .llseek         = noop_llseek,
-};
-
-unsigned char
-pcf8563_readreg(int reg)
-{
-        unsigned char res = rtc_read(reg);
-
-        /* The PCF8563 does not return 0 for unimplemented bits. */
-        switch (reg) {
-                case RTC_SECONDS:
-                case RTC_MINUTES:
-                        res &= 0x7F;
-                        break;
-                case RTC_HOURS:
-                case RTC_DAY_OF_MONTH:
-                        res &= 0x3F;
-                        break;
-                case RTC_WEEKDAY:
-                        res &= 0x07;
-                        break;
-                case RTC_MONTH:
-                        res &= 0x1F;
-                        break;
-                case RTC_CONTROL1:
-                        res &= 0xA8;
-                        break;
-                case RTC_CONTROL2:
-                        res &= 0x1F;
-                        break;
-                case RTC_CLOCKOUT_FREQ:
-                case RTC_TIMER_CONTROL:
-                        res &= 0x83;
-                        break;
-        }
-        return res;
-}
-
-void
-pcf8563_writereg(int reg, unsigned char val)
-{
-        rtc_write(reg, val);
-}
-
-void
-get_rtc_time(struct rtc_time *tm)
-{
-        tm->tm_sec  = rtc_read(RTC_SECONDS);
-        tm->tm_min  = rtc_read(RTC_MINUTES);
-        tm->tm_hour = rtc_read(RTC_HOURS);
-        tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
-        tm->tm_wday = rtc_read(RTC_WEEKDAY);
-        tm->tm_mon  = rtc_read(RTC_MONTH);
-        tm->tm_year = rtc_read(RTC_YEAR);
-
-        if (tm->tm_sec & 0x80) {
-                printk(KERN_ERR "%s: RTC Voltage Low - reliable date/time "
-                       "information is no longer guaranteed!\n", PCF8563_NAME);
-        }
-
-        tm->tm_year  = bcd2bin(tm->tm_year) +
-                       ((tm->tm_mon & 0x80) ? 100 : 0);
-        tm->tm_sec  &= 0x7F;
-        tm->tm_min  &= 0x7F;
-        tm->tm_hour &= 0x3F;
-        tm->tm_mday &= 0x3F;
-        tm->tm_wday &= 0x07; /* Not coded in BCD. */
-        tm->tm_mon  &= 0x1F;
-
-        tm->tm_sec = bcd2bin(tm->tm_sec);
-        tm->tm_min = bcd2bin(tm->tm_min);
-        tm->tm_hour = bcd2bin(tm->tm_hour);
-        tm->tm_mday = bcd2bin(tm->tm_mday);
-        tm->tm_mon = bcd2bin(tm->tm_mon);
-        tm->tm_mon--; /* Month is 1..12 in RTC but 0..11 in linux */
-}
-
-int __init
-pcf8563_init(void)
-{
-        static int res;
-        static int first = 1;
-
-        if (!first)
-                return res;
-        first = 0;
-
-        /* Initiate the i2c protocol. */
-        res = i2c_init();
-        if (res < 0) {
-                printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n");
-                return res;
-        }
-
-        /*
-         * First of all we need to reset the chip. This is done by
-         * clearing control1, control2 and clk freq and resetting
-         * all alarms.
-         */
-        if (rtc_write(RTC_CONTROL1, 0x00) < 0)
-                goto err;
-
-        if (rtc_write(RTC_CONTROL2, 0x00) < 0)
-                goto err;
-
-        if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
-                goto err;
-
-        if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
-                goto err;
-
-        /* Reset the alarms. */
-        if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
-                goto err;
-
-        if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
-                goto err;
-
-        if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
-                goto err;
-
-        if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
-                goto err;
-
-        /* Check for low voltage, and warn about it. */
-        if (rtc_read(RTC_SECONDS) & 0x80) {
-                voltage_low = 1;
-                printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-                       "date/time information is no longer guaranteed!\n",
-                       PCF8563_NAME);
-        }
-
-        return res;
-
-err:
-        printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
-        res = -1;
-        return res;
-}
-
-void __exit
-pcf8563_exit(void)
-{
-        unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME);
-}
-
-/*
- * ioctl calls for this driver. Why return -ENOTTY upon error? Because
- * POSIX says so!
- */
-static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-        /* Some sanity checks. */
-        if (_IOC_TYPE(cmd) != RTC_MAGIC)
-                return -ENOTTY;
-
-        if (_IOC_NR(cmd) > RTC_MAX_IOCTL)
-                return -ENOTTY;
-
-        switch (cmd) {
-        case RTC_RD_TIME:
-        {
-                struct rtc_time tm;
-
-                mutex_lock(&rtc_lock);
-                memset(&tm, 0, sizeof tm);
-                get_rtc_time(&tm);
-
-                if (copy_to_user((struct rtc_time *) arg, &tm,
-                                 sizeof tm)) {
-                        mutex_unlock(&rtc_lock);
-                        return -EFAULT;
-                }
-
-                mutex_unlock(&rtc_lock);
-
-                return 0;
-        }
-        case RTC_SET_TIME:
-        {
-                int leap;
-                int year;
-                int century;
-                struct rtc_time tm;
-
-                memset(&tm, 0, sizeof tm);
-                if (!capable(CAP_SYS_TIME))
-                        return -EPERM;
-
-                if (copy_from_user(&tm, (struct rtc_time *) arg,
-                                   sizeof tm))
-                        return -EFAULT;
-
-                /* Convert from struct tm to struct rtc_time. */
-                tm.tm_year += 1900;
-                tm.tm_mon += 1;
-
-                /*
-                 * Check if tm.tm_year is a leap year. A year is a leap
-                 * year if it is divisible by 4 but not 100, except
-                 * that years divisible by 400 _are_ leap years.
-                 */
-                year = tm.tm_year;
-                leap = (tm.tm_mon == 2) &&
-                        ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
-
-                /* Perform some sanity checks. */
-                if ((tm.tm_year < 1970) ||
-                    (tm.tm_mon > 12) ||
-                    (tm.tm_mday == 0) ||
-                    (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
-                    (tm.tm_wday >= 7) ||
-                    (tm.tm_hour >= 24) ||
-                    (tm.tm_min >= 60) ||
-                    (tm.tm_sec >= 60))
-                        return -EINVAL;
-
-                century = (tm.tm_year >= 2000) ? 0x80 : 0;
-                tm.tm_year = tm.tm_year % 100;
-
-                tm.tm_year = bin2bcd(tm.tm_year);
-                tm.tm_mon = bin2bcd(tm.tm_mon);
-                tm.tm_mday = bin2bcd(tm.tm_mday);
-                tm.tm_hour = bin2bcd(tm.tm_hour);
-                tm.tm_min = bin2bcd(tm.tm_min);
-                tm.tm_sec = bin2bcd(tm.tm_sec);
-                tm.tm_mon |= century;
-
-                mutex_lock(&rtc_lock);
-
-                rtc_write(RTC_YEAR, tm.tm_year);
-                rtc_write(RTC_MONTH, tm.tm_mon);
-                rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
-                rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
-                rtc_write(RTC_HOURS, tm.tm_hour);
-                rtc_write(RTC_MINUTES, tm.tm_min);
-                rtc_write(RTC_SECONDS, tm.tm_sec);
-
-                mutex_unlock(&rtc_lock);
-
-                return 0;
-        }
-        case RTC_VL_READ:
-                if (voltage_low)
-                        printk(KERN_ERR "%s: RTC Voltage Low - "
-                               "reliable date/time information is no "
-                               "longer guaranteed!\n", PCF8563_NAME);
-
-                if (copy_to_user((int *) arg, &voltage_low, sizeof(int)))
-                        return -EFAULT;
-                return 0;
-
-        case RTC_VL_CLR:
-        {
-                /* Clear the VL bit in the seconds register in case
-                 * the time has not been set already (which would
-                 * have cleared it). This does not really matter
-                 * because of the cached voltage_low value but do it
-                 * anyway for consistency. */
-
-                int ret = rtc_read(RTC_SECONDS);
-
-                rtc_write(RTC_SECONDS, (ret & 0x7F));
-
-                /* Clear the cached value. */
-                voltage_low = 0;
-
-                return 0;
-        }
-        default:
-                return -ENOTTY;
-        }
-
-        return 0;
-}
-
-static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
-        int ret;
-
-        mutex_lock(&pcf8563_mutex);
-        return pcf8563_ioctl(filp, cmd, arg);
-        mutex_unlock(&pcf8563_mutex);
-
-        return ret;
-}
-
-static int __init pcf8563_register(void)
-{
-        if (pcf8563_init() < 0) {
-                printk(KERN_INFO "%s: Unable to initialize Real-Time Clock "
-                       "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
-                return -1;
-        }
-
-        if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-                printk(KERN_INFO "%s: Unable to get major numer %d for RTC "
-                       "device.\n", PCF8563_NAME, PCF8563_MAJOR);
-                return -1;
-        }
-
-        printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME,
-               DRIVER_VERSION);
-
-        /* Check for low voltage, and warn about it. */
-        if (voltage_low) {
-                printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
-                       "information is no longer guaranteed!\n", PCF8563_NAME);
-        }
-
-        return 0;
-}
-
-module_init(pcf8563_register);
-module_exit(pcf8563_exit);