CRIS: Remove VCS simulator specific code

The VCS simulator was a tool used in the development of the chip
and is no longer used or necessary.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

1 files changed, 2 insertions, 56 deletions

diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S
index 5d502b9ab56..51e34165ece 100644
--- a/arch/cris/arch-v32/kernel/head.S
+++ b/arch/cris/arch-v32/kernel/head.S
@@ -36,13 +36,6 @@
         .global nand_boot
         .global swapper_pg_dir
 
-        ;; Dummy section to make it bootable with current VCS simulator
-#ifdef CONFIG_ETRAX_VCS_SIM
-        .section ".boot", "ax"
-        ba tstart
-        nop
-#endif
-
         .text
 tstart:
         ;; This is the entry point of the kernel. The CPU is currently in
@@ -75,17 +68,10 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
                 | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)     \
                 | REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 5)     \
                 | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
-#elif !defined(CONFIG_ETRAX_VCS_SIM)
-        move.d  REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)       \
-                | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)     \
-                | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
 #else
-        ;; Map the virtual DRAM to the RW eprom area at address 0.
-        ;; Also map 0xa for the hook calls,
         move.d  REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)       \
                 | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)     \
-                | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb)   \
-                | REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
+                | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
 #endif
 
         ;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00.
@@ -126,27 +112,6 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
                 | REG_STATE(mmu, rw_mm_cfg, seg_2, page)        \
                 | REG_STATE(mmu, rw_mm_cfg, seg_1, page)        \
                 | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
-#elif !defined(CONFIG_ETRAX_VCS_SIM)
-        move.d  REG_STATE(mmu, rw_mm_cfg, we, on)               \
-                | REG_STATE(mmu, rw_mm_cfg, acc, on)            \
-                | REG_STATE(mmu, rw_mm_cfg, ex, on)             \
-                | REG_STATE(mmu, rw_mm_cfg, inv, on)            \
-                | REG_STATE(mmu, rw_mm_cfg, seg_f, linear)      \
-                | REG_STATE(mmu, rw_mm_cfg, seg_e, linear)      \
-                | REG_STATE(mmu, rw_mm_cfg, seg_d, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_c, linear)      \
-                | REG_STATE(mmu, rw_mm_cfg, seg_b, linear)      \
-                | REG_STATE(mmu, rw_mm_cfg, seg_a, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_9, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_8, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_7, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_6, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_5, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_4, linear)      \
-                | REG_STATE(mmu, rw_mm_cfg, seg_3, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_2, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_1, page)        \
-                | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
 #else
         move.d  REG_STATE(mmu, rw_mm_cfg, we, on)               \
                 | REG_STATE(mmu, rw_mm_cfg, acc, on)            \
@@ -157,7 +122,7 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
                 | REG_STATE(mmu, rw_mm_cfg, seg_d, page)        \
                 | REG_STATE(mmu, rw_mm_cfg, seg_c, linear)      \
                 | REG_STATE(mmu, rw_mm_cfg, seg_b, linear)      \
-                | REG_STATE(mmu, rw_mm_cfg, seg_a, linear)      \
+                | REG_STATE(mmu, rw_mm_cfg, seg_a, page)        \
                 | REG_STATE(mmu, rw_mm_cfg, seg_9, page)        \
                 | REG_STATE(mmu, rw_mm_cfg, seg_8, page)        \
                 | REG_STATE(mmu, rw_mm_cfg, seg_7, page)        \
@@ -226,7 +191,6 @@ master_cpu:
         move.d secondary_cpu_entry, $r1
         move.d $r1, [$r0]
 #endif
-#ifndef CONFIG_ETRAX_VCS_SIM
         ; Check if starting from DRAM (network->RAM boot or unpacked
         ; compressed kernel), or directly from flash.
         lapcq   ., $r0
@@ -234,7 +198,6 @@ master_cpu:
         cmp.d   0x10000, $r0    ; Arbitrary, something above this code.
         blo     _inflash0
         nop
-#endif
 
         jump    _inram          ; Jump to cached RAM.
         nop
@@ -326,7 +289,6 @@ move_cramfs:
         move.d  romfs_length, $r1
         move.d  $r0, [$r1]
 
-#ifndef CONFIG_ETRAX_VCS_SIM
         ;; The kernel could have been unpacked to DRAM by the loader, but
         ;; the cramfs image could still be in the flash immediately
         ;; following the compressed kernel image. The loader passes the address
@@ -335,10 +297,6 @@ move_cramfs:
         cmp.d   0x0ffffff8, $r9
         bhs     _no_romfs_in_flash ; R9 points outside the flash area.
         nop
-#else
-        ba _no_romfs_in_flash
-        nop
-#endif
         ;; cramfs rootfs might to be in flash. Check for it.
         move.d  [$r9], $r0      ; cramfs_super.magic
         cmp.d   CRAMFS_MAGIC, $r0
@@ -396,7 +354,6 @@ _no_romfs_in_flash:
         move.d  romfs_length, $r3
         move.d  $r2, [$r3]      ; store size at romfs_length
 
-#ifndef CONFIG_ETRAX_VCS_SIM
         add.d   $r2, $r0        ; copy from end and downwards
         add.d   $r2, $r1
 
@@ -410,7 +367,6 @@ _no_romfs_in_flash:
         subq    1, $r2
         bne     1b
         nop
-#endif
 
 4:
         ;; BSS move done.
@@ -455,7 +411,6 @@ no_command_line:
         move.d  etrax_irv, $r1  ; Set the exception base register and pointer.
         move.d  $r0, [$r1]
 
-#ifndef CONFIG_ETRAX_VCS_SIM
         ;; Clear the BSS region from _bss_start to _end.
         move.d  __bss_start, $r0
         move.d  _end, $r1
@@ -463,15 +418,6 @@ no_command_line:
         cmp.d   $r1, $r0
         blo 1b
         nop
-#endif
-
-#ifdef CONFIG_ETRAX_VCS_SIM
-        /* Set the watchdog timeout to something big. Will be removed when */
-        /* watchdog can be disabled with command line option */
-        move.d  0x7fffffff, $r10
-        jsr     CPU_WATCHDOG_TIMEOUT
-        nop
-#endif
 
         ; Initialize registers to increase determinism
         move.d __bss_start, $r0