Blackfin: bf548-ezkit: increase u-boot partition size

The BF54x processor has a ton of on-chip peripherals and in order to
support them all, the u-boot image is quite large.  So give it 512KiB
in all bootable flashes to make our lives easier.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 7 insertions, 3 deletions

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 61c851bb08d..216e26999af 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -837,8 +837,12 @@ static struct platform_device bfin_atapi_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
         {
-                .name = "linux kernel(nand)",
+                .name = "bootloader(nand)",
                 .offset = 0,
+                .size = 0x80000,
+        }, {
+                .name = "linux kernel(nand)",
+                .offset = MTDPART_OFS_APPEND,
                 .size = 4 * 1024 * 1024,
         },
         {
@@ -901,7 +905,7 @@ static struct platform_device bf54x_sdh_device = {
 static struct mtd_partition ezkit_partitions[] = {
         {
                 .name       = "bootloader(nor)",
-                .size       = 0x40000,
+                .size       = 0x80000,
                 .offset     = 0,
         }, {
                 .name       = "linux kernel(nor)",
@@ -943,7 +947,7 @@ static struct platform_device ezkit_flash_device = {
 static struct mtd_partition bfin_spi_flash_partitions[] = {
         {
                 .name = "bootloader(spi)",
-                .size = 0x00040000,
+                .size = 0x00080000,
                 .offset = 0,
                 .mask_flags = MTD_CAP_ROM
         }, {