FB: sa1100: move platform data to platform files

Move platform data out of the sa1100fb driver into the various
platform files themselves.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

8 files changed, 212 insertions, 5 deletions

diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 0c4b76ab4d8..37fb0cd1a29 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -204,6 +206,39 @@ static struct mcp_plat_data assabet_mcp_data = {
         .sclk_rate      = 11981000,
 };
 
+#ifndef ASSABET_PAL_VIDEO
+/*
+ * The assabet uses a sharp LQ039Q2DS54 LCD module.  It is actually
+ * takes an RGB666 signal, but we provide it with an RGB565 signal
+ * instead (def_rgb_16).
+ */
+static struct sa1100fb_mach_info lq039q2ds54_info = {
+        .pixclock       = 171521,       .bpp            = 16,
+        .xres           = 320,          .yres           = 240,
+
+        .hsync_len      = 5,            .vsync_len      = 1,
+        .left_margin    = 61,           .upper_margin   = 3,
+        .right_margin   = 9,            .lower_margin   = 0,
+
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
+#else
+static struct sa1100fb_mach_info pal_info = {
+        .pixclock       = 67797,        .bpp            = 16,
+        .xres           = 640,          .yres           = 512,
+
+        .hsync_len      = 64,           .vsync_len      = 6,
+        .left_margin    = 125,          .upper_margin   = 70,
+        .right_margin   = 115,          .lower_margin   = 36,
+
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
 static void __init assabet_init(void)
 {
         /*
@@ -249,6 +284,11 @@ static void __init assabet_init(void)
 #endif
         }
 
+#ifndef ASSABET_PAL_VIDEO
+        sa11x0_register_lcd(&lq039q2ds54_info);
+#else
+        sa11x0_register_lcd(&pal_video);
+#endif
         sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
                             ARRAY_SIZE(assabet_flash_resources));
         sa11x0_register_irda(&assabet_irda_data);
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index fd5652118ed..70f6cdc9e63 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -28,6 +28,8 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -310,6 +312,20 @@ static struct resource collie_flash_resources[] = {
         }
 };
 
+static struct sa1100fb_mach_info collie_lcd_info = {
+        .pixclock       = 171521,       .bpp            = 16,
+        .xres           = 320,          .yres           = 240,
+
+        .hsync_len      = 5,            .vsync_len      = 1,
+        .left_margin    = 11,           .upper_margin   = 2,
+        .right_margin   = 30,           .lower_margin   = 0,
+
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
+
 static void __init collie_init(void)
 {
         int ret = 0;
@@ -348,6 +364,7 @@ static void __init collie_init(void)
                 printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
         }
 
+        sa11x0_register_lcd(&collie_lcd_info);
         sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
                             ARRAY_SIZE(collie_flash_resources));
         sa11x0_register_mcp(&collie_mcp_data);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index bb10ee2cb89..f57808fb182 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -19,6 +19,8 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/div64.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
@@ -294,6 +296,11 @@ static struct platform_device sa11x0fb_device = {
         .resource       = sa11x0fb_resources,
 };
 
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
+{
+        sa11x0_register_device(&sa11x0fb_device, inf);
+}
+
 static struct platform_device sa11x0pcmcia_device = {
         .name           = "sa11x0-pcmcia",
         .id             = -1,
@@ -356,7 +363,6 @@ static struct platform_device *sa11x0_devices[] __initdata = {
         &sa11x0uart3_device,
         &sa11x0ssp_device,
         &sa11x0pcmcia_device,
-        &sa11x0fb_device,
         &sa11x0rtc_device,
 };
 
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 33268cf6be3..3b903f42464 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -40,3 +40,6 @@ void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
 void sa11x0_register_mcp(struct mcp_plat_data *data);
+
+struct sa1100fb_mach_info;
+void sa11x0_register_lcd(struct sa1100fb_mach_info *inf);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 1e6b3c105ba..1f8a271dc66 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
@@ -36,13 +38,26 @@ static void h3100_lcd_power(int enable)
         }
 }
 
+static struct sa1100fb_mach_info h3100_lcd_info = {
+        .pixclock       = 406977,       .bpp            = 4,
+        .xres           = 320,          .yres           = 240,
+
+        .hsync_len      = 26,           .vsync_len      = 41,
+        .left_margin    = 4,            .upper_margin   = 0,
+        .right_margin   = 4,            .lower_margin   = 0,
+
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+        .cmap_greyscale = 1,
+        .cmap_inverse   = 1,
+
+        .lccr0          = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
+        .lccr3          = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+};
 
 static void __init h3100_map_io(void)
 {
         h3xxx_map_io();
 
-        sa1100fb_lcd_power = h3100_lcd_power;
-
         /* Older bootldrs put GPIO2-9 in alternate mode on the
            assumption that they are used for video */
         GAFR &= ~0x000001fb;
@@ -80,6 +95,9 @@ static void __init h3100_mach_init(void)
 {
         h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
         h3xxx_mach_init();
+
+        sa1100fb_lcd_power = h3100_lcd_power;
+        sa11x0_register_lcd(&h3100_lcd_info);
         sa11x0_register_irda(&h3100_irda_data);
 }
 
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6b58e7460ec..3dd39bfe348 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,6 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/gpio.h>
 
+#include <video/sa1100fb.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irda.h>
@@ -56,11 +58,33 @@ err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
 err1:   return;
 }
 
+static const struct sa1100fb_rgb h3600_rgb_16 = {
+        .red    = { .offset = 12, .length = 4, },
+        .green  = { .offset = 7,  .length = 4, },
+        .blue   = { .offset = 1,  .length = 4, },
+        .transp = { .offset = 0,  .length = 0, },
+};
+
+static struct sa1100fb_mach_info h3600_lcd_info = {
+        .pixclock       = 174757,       .bpp            = 16,
+        .xres           = 320,          .yres           = 240,
+
+        .hsync_len      = 3,            .vsync_len      = 3,
+        .left_margin    = 12,           .upper_margin   = 10,
+        .right_margin   = 17,           .lower_margin   = 1,
+
+        .cmap_static    = 1,
+
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
+
+        .rgb[RGB_16] = &h3600_rgb_16,
+};
+
+
 static void __init h3600_map_io(void)
 {
         h3xxx_map_io();
-
-        sa1100fb_lcd_power = h3600_lcd_power;
 }
 
 /*
@@ -121,6 +145,9 @@ static void __init h3600_mach_init(void)
 {
         h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
         h3xxx_mach_init();
+
+        sa1100fb_lcd_power = h3600_lcd_power;
+        sa11x0_register_lcd(&h3600_lcd_info);
         sa11x0_register_irda(&h3600_irda_data);
 }
 
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e2761f3d..463a322a425 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,6 +6,8 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -26,8 +28,85 @@ static struct mcp_plat_data lart_mcp_data = {
         .sclk_rate      = 11981000,
 };
 
+#ifdef LART_GREY_LCD
+static struct sa1100fb_mach_info lart_grey_info = {
+        .pixclock       = 150000,       .bpp            = 4,
+        .xres           = 320,          .yres           = 240,
+
+        .hsync_len      = 1,            .vsync_len      = 1,
+        .left_margin    = 4,            .upper_margin   = 0,
+        .right_margin   = 2,            .lower_margin   = 0,
+
+        .cmap_greyscale = 1,
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+        .lccr0          = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
+        .lccr3          = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_COLOR_LCD
+static struct sa1100fb_mach_info lart_color_info = {
+        .pixclock       = 150000,       .bpp            = 16,
+        .xres           = 320,          .yres           = 240,
+
+        .hsync_len      = 2,            .vsync_len      = 3,
+        .left_margin    = 69,           .upper_margin   = 14,
+        .right_margin   = 8,            .lower_margin   = 4,
+
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+#ifdef LART_VIDEO_OUT
+static struct sa1100fb_mach_info lart_video_info = {
+        .pixclock       = 39721,        .bpp            = 16,
+        .xres           = 640,          .yres           = 480,
+
+        .hsync_len      = 95,           .vsync_len      = 2,
+        .left_margin    = 40,           .upper_margin   = 32,
+        .right_margin   = 24,           .lower_margin   = 11,
+
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
+};
+#endif
+
+#ifdef LART_KIT01_LCD
+static struct sa1100fb_mach_info lart_kit01_info = {
+        .pixclock       = 63291,        .bpp            = 16,
+        .xres           = 640,          .yres           = 480,
+
+        .hsync_len      = 64,           .vsync_len      = 3,
+        .left_margin    = 122,          .upper_margin   = 45,
+        .right_margin   = 10,           .lower_margin   = 10,
+
+        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+        .lccr3          = LCCR3_OutEnH | LCCR3_PixFlEdg
+};
+#endif
+
 static void __init lart_init(void)
 {
+        struct sa1100fb_mach_info *inf = NULL;
+
+#ifdef LART_GREY_LCD
+        inf = &lart_grey_info;
+#endif
+#ifdef LART_COLOR_LCD
+        inf = &lart_color_info;
+#endif
+#ifdef LART_VIDEO_OUT
+        inf = &lart_video_info;
+#endif
+#ifdef LART_KIT01_LCD
+        inf = &lart_kit01_info;
+#endif
+
+        if (inf)
+                sa11x0_register_lcd(inf);
+
         sa11x0_register_mcp(&lart_mcp_data);
 }
 
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 318b2b766a0..c695b730bd6 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,6 +9,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#include <video/sa1100fb.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
@@ -57,8 +59,23 @@ static struct mcp_plat_data shannon_mcp_data = {
         .sclk_rate      = 11981000,
 };
 
+static struct sa1100fb_mach_info shannon_lcd_info = {
+        .pixclock       = 152500,       .bpp            = 8,
+        .xres           = 640,          .yres           = 480,
+
+        .hsync_len      = 4,            .vsync_len      = 3,
+        .left_margin    = 2,            .upper_margin   = 0,
+        .right_margin   = 1,            .lower_margin   = 0,
+
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+
+        .lccr0          = LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
+        .lccr3          = LCCR3_ACBsDiv(512),
+};
+
 static void __init shannon_init(void)
 {
+        sa11x0_register_lcd(&shannon_lcd_info);
         sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
         sa11x0_register_mcp(&shannon_mcp_data);
 }