[ARM] pxa/cm-x300: add support for PXA310 cpu

CM-X300 can be assembled with PXA300 and PXA310 CPU. Provide support for
both CPU variants.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

1 files changed, 36 insertions, 6 deletions

diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 9a21bc567ca..d9006c271e8 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -59,7 +59,7 @@
 #define GPIO97_RTC_RD           (97)
 #define GPIO98_RTC_IO           (98)
 
-static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
         /* LCD */
         GPIO54_LCD_LDD_0,
         GPIO55_LCD_LDD_1,
@@ -158,20 +158,47 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
         GPIO22_I2C_SDA,
 };
 
-static mfp_cfg_t cm_x300_rev_lt130_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
         /* GPIOs */
         GPIO79_GPIO,                    /* LED */
         GPIO77_GPIO,                    /* WiFi reset */
         GPIO78_GPIO,                    /* BT reset */
 };
 
-static mfp_cfg_t cm_x300_rev_ge130_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
         /* GPIOs */
         GPIO76_GPIO,                    /* LED */
         GPIO71_GPIO,                    /* WiFi reset */
         GPIO70_GPIO,                    /* BT reset */
 };
 
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+        /* USB PORT 2 */
+        ULPI_STP,
+        ULPI_NXT,
+        ULPI_DIR,
+        GPIO30_ULPI_DATA_OUT_0,
+        GPIO31_ULPI_DATA_OUT_1,
+        GPIO32_ULPI_DATA_OUT_2,
+        GPIO33_ULPI_DATA_OUT_3,
+        GPIO34_ULPI_DATA_OUT_4,
+        GPIO35_ULPI_DATA_OUT_5,
+        GPIO36_ULPI_DATA_OUT_6,
+        GPIO37_ULPI_DATA_OUT_7,
+        GPIO38_ULPI_CLK,
+        /* external PHY reset pin */
+        GPIO127_GPIO,
+
+        /* USB PORT 3 */
+        GPIO77_USB_P3_1,
+        GPIO78_USB_P3_2,
+        GPIO79_USB_P3_3,
+        GPIO80_USB_P3_4,
+        GPIO81_USB_P3_5,
+        GPIO82_USB_P3_6,
+        GPIO0_2_USBH_PEN,
+};
+
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource dm9000_resources[] = {
         [0] = {
@@ -553,12 +580,15 @@ static void __init cm_x300_init_wi2wi(void)
 static void __init cm_x300_init_mfp(void)
 {
         /* board-processor specific GPIO initialization */
-        pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
 
         if (system_rev < 130)
-                pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_rev_lt130_mfp_cfg));
+                pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
         else
-                pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_rev_ge130_mfp_cfg));
+                pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+        if (cpu_is_pxa310())
+                pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
 }
 
 static void __init cm_x300_init(void)