ARM: iPAQ: move serial port support functions

No point calling sa1100_register_uart_fns early - these aren't
used until late in the boot sequence.  Also convert to gpiolib
support.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 52 insertions, 26 deletions

diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index c53ad651835..8a6a0e744db 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -91,6 +91,9 @@ static void h3xxx_init_gpio(struct gpio_default_state *s, size_t n)
 }
 
 
+/*
+ * H3xxx flash support
+ */
 static struct mtd_partition h3xxx_partitions[] = {
         {
                 .name           = "H3XXX boot firmware",
@@ -122,42 +125,35 @@ static struct resource h3xxx_flash_resource = {
         .flags          = IORESOURCE_MEM,
 };
 
-static void h3xxx_mach_init(void)
-{
-        sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
-}
 
 /*
- * low-level UART features
+ * H3xxx uart support
  */
-
-static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
 {
         if (port->mapbase == _Ser3UTCR0) {
-                if (mctrl & TIOCM_RTS)
-                        GPCR = GPIO_H3600_COM_RTS;
-                else
-                        GPSR = GPIO_H3600_COM_RTS;
+                gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
         }
 }
 
-static u_int h3600_uart_get_mctrl(struct uart_port *port)
+static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
 {
         u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
 
         if (port->mapbase == _Ser3UTCR0) {
-                int gplr = GPLR;
-                /* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
-                if (gplr & GPIO_H3600_COM_DCD)
+                /*
+                 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
+                 */
+                if (gpio_get_value(H3XXX_GPIO_COM_DCD))
                         ret &= ~TIOCM_CD;
-                if (gplr & GPIO_H3600_COM_CTS)
+                if (gpio_get_value(H3XXX_GPIO_COM_CTS))
                         ret &= ~TIOCM_CTS;
         }
 
         return ret;
 }
 
-static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
 {
         if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
                 assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
@@ -170,7 +166,7 @@ static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
  * Enable/Disable wake up events for this serial port.
  * Obviously, we only support this on the normal COM port.
  */
-static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
+static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
 {
         int err = -EINVAL;
 
@@ -184,13 +180,20 @@ static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
         return err;
 }
 
-static struct sa1100_port_fns h3600_port_fns __initdata = {
-        .set_mctrl      = h3600_uart_set_mctrl,
-        .get_mctrl      = h3600_uart_get_mctrl,
-        .pm             = h3600_uart_pm,
-        .set_wake       = h3600_uart_set_wake,
+static struct sa1100_port_fns h3xxx_port_fns __initdata = {
+        .set_mctrl      = h3xxx_uart_set_mctrl,
+        .get_mctrl      = h3xxx_uart_get_mctrl,
+        .pm             = h3xxx_uart_pm,
+        .set_wake       = h3xxx_uart_set_wake,
 };
 
+
+static void h3xxx_mach_init(void)
+{
+        sa1100_register_uart_fns(&h3xxx_port_fns);
+        sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
+}
+
 /*
  * helper for sa1100fb
  */
@@ -227,7 +230,6 @@ static void __init h3xxx_map_io(void)
         sa1100_map_io();
         iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
 
-        sa1100_register_uart_fns(&h3600_port_fns);
         sa1100_register_uart(0, 3); /* Common serial port */
 //      sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
 
@@ -329,7 +331,7 @@ static void __init h3100_map_io(void)
 
         /* Initialize h3100-specific values here */
         GPCR = 0x0fffffff;       /* All outputs are set low by default */
-        GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
+        GPDR = GPIO_H3600_L3_CLOCK |
                GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
                GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
                H3100_DIRECT_EGPIO;
@@ -364,6 +366,9 @@ static struct irda_platform_data h3100_irda_data = {
 static struct gpio_default_state h3100_default_gpio[] = {
         { H3100_GPIO_IR_ON,     GPIO_MODE_OUT0, "IrDA power" },
         { H3100_GPIO_IR_FSEL,   GPIO_MODE_OUT0, "IrDA fsel" },
+        { H3XXX_GPIO_COM_DCD,   GPIO_MODE_IN,   "COM DCD" },
+        { H3XXX_GPIO_COM_CTS,   GPIO_MODE_IN,   "COM CTS" },
+        { H3XXX_GPIO_COM_RTS,   GPIO_MODE_OUT0, "COM RTS" },
 };
 
 static void h3100_mach_init(void)
@@ -460,7 +465,7 @@ static void __init h3600_map_io(void)
         /* Initialize h3600-specific values here */
 
         GPCR = 0x0fffffff;       /* All outputs are set low by default */
-        GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
+        GPDR = GPIO_H3600_L3_CLOCK |
                GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
                GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
                GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
@@ -489,8 +494,15 @@ static struct irda_platform_data h3600_irda_data = {
         .set_speed      = h3600_irda_set_speed,
 };
 
+static struct gpio_default_state h3600_default_gpio[] = {
+        { H3XXX_GPIO_COM_DCD,   GPIO_MODE_IN,   "COM DCD" },
+        { H3XXX_GPIO_COM_CTS,   GPIO_MODE_IN,   "COM CTS" },
+        { H3XXX_GPIO_COM_RTS,   GPIO_MODE_OUT0, "COM RTS" },
+};
+
 static void h3600_mach_init(void)
 {
+        h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
         h3xxx_mach_init();
         sa11x0_register_irda(&h3600_irda_data);
 }
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
index d4d0b22d019..18de674af56 100644
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -24,6 +24,20 @@
 #define _INCLUDE_H3600_GPIO_H_
 
 /*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON           0
+#define H3XXX_GPIO_PCMCIA_CD1           10
+#define H3XXX_GPIO_PCMCIA_IRQ1          11
+#define H3XXX_GPIO_PCMCIA_CD0           17
+#define H3XXX_GPIO_SYS_CLK              19
+#define H3XXX_GPIO_PCMCIA_IRQ0          21
+#define H3XXX_GPIO_COM_DCD              23
+#define H3XXX_GPIO_OPTION               24
+#define H3XXX_GPIO_COM_CTS              25
+#define H3XXX_GPIO_COM_RTS              26
+
+/*
  * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
  * This file contains machine-specific definitions
  */