ARM: pxa: append tavorevb3 support

Bringup tavorevb3 development platform. UART and PMIC are enabled.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

5 files changed, 149 insertions, 1 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index e2453dba517..dd235ecc9d6 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -41,6 +41,10 @@ config MACH_TAVOREVB
         select PXA3xx
         select CPU_PXA930
 
+config MACH_TAVOREVB3
+        bool "PXA95x Development Platform (aka TavorEVB III)"
+        select CPU_PXA950
+
 config MACH_SAAR
         bool "PXA930 Handheld Platform (aka SAAR)"
         select PXA3xx
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index a1db59b124f..e2f89c2c6f4 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
 obj-$(CONFIG_MACH_ZYLONITE320)  += zylonite.o zylonite_pxa320.o
 obj-$(CONFIG_MACH_LITTLETON)    += littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)     += tavorevb.o
+obj-$(CONFIG_MACH_TAVOREVB3)    += tavorevb3.o
 obj-$(CONFIG_MACH_SAAR)         += saar.o
 
 # 3rd Party Dev Platforms
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index 0d119d3b922..04f7c97044f 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -69,6 +69,7 @@
 #define nBE0_GPIO_60            MFP_CFG(nBE0, AF0)
 #define nBE1_GPIO_61            MFP_CFG(nBE1, AF0)
 #define RDY_GPIO_62             MFP_CFG(RDY, AF0)
+#define PMIC_INT_GPIO83         MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
 
 /* Chip Select */
 #define DF_nCS0_nCS2            MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
@@ -92,6 +93,9 @@
 #define GPIO63_CI2C_SCL         MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
 #define GPIO64_CI2C_SDA         MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
 
+#define GPIO73_CI2C_SCL         MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
+#define GPIO74_CI2C_SDA         MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
+
 #define GPIO77_CI2C_SCL         MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
 #define GPIO78_CI2C_SDA         MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
 
@@ -345,6 +349,9 @@
 #define GPIO69_UART1_CTS        MFP_CFG(GPIO69, AF2)
 #define GPIO70_UART1_RTS        MFP_CFG(GPIO70, AF2)
 
+#define GPIO53_UART1_TXD        MFP_CFG(GPIO53, AF2)
+#define GPIO54_UART1_RXD        MFP_CFG(GPIO54, AF2)
+
 /* UART2 - BTUART */
 #define GPIO91_UART2_RXD        MFP_CFG(GPIO91, AF1)
 #define GPIO92_UART2_TXD        MFP_CFG(GPIO92, AF1)
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 06429200828..7d29dd3af79 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
 
 static int __init pxa930_init(void)
 {
-        if (cpu_is_pxa930() || cpu_is_pxa935()) {
+        if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
                 mfp_init_base(io_p2v(MFPR_BASE));
                 mfp_init_addr(pxa930_mfp_addr_map);
         }
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
new file mode 100644
index 00000000000..5eeba64515e
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -0,0 +1,136 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb3.c
+ *
+ *  Support for the Marvell EVB3 Development Platform.
+ *
+ *  Copyright:  (C) Copyright 2008-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa930.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define TAVOREVB3_NR_IRQS       (IRQ_BOARD_START + 24)
+
+static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
+        /* UART */
+        GPIO53_UART1_TXD,
+        GPIO54_UART1_RXD,
+
+        /* PMIC */
+        PMIC_INT_GPIO83,
+};
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pm860x_touch_pdata evb3_touch = {
+        .gpadc_prebias  = 1,
+        .slot_cycle     = 1,
+        .tsi_prebias    = 6,
+        .pen_prebias    = 16,
+        .pen_prechg     = 2,
+        .res_x          = 300,
+};
+
+static struct pm860x_backlight_pdata evb3_backlight[] = {
+        {
+                .id     = PM8606_ID_BACKLIGHT,
+                .iset   = PM8606_WLED_CURRENT(24),
+                .flags  = PM8606_BACKLIGHT1,
+        },
+        {},
+};
+
+static struct pm860x_led_pdata evb3_led[] = {
+        {
+                .id     = PM8606_ID_LED,
+                .iset   = PM8606_LED_CURRENT(12),
+                .flags  = PM8606_LED1_RED,
+        }, {
+                .id     = PM8606_ID_LED,
+                .iset   = PM8606_LED_CURRENT(12),
+                .flags  = PM8606_LED1_GREEN,
+        }, {
+                .id     = PM8606_ID_LED,
+                .iset   = PM8606_LED_CURRENT(12),
+                .flags  = PM8606_LED1_BLUE,
+        }, {
+                .id     = PM8606_ID_LED,
+                .iset   = PM8606_LED_CURRENT(12),
+                .flags  = PM8606_LED2_RED,
+        }, {
+                .id     = PM8606_ID_LED,
+                .iset   = PM8606_LED_CURRENT(12),
+                .flags  = PM8606_LED2_GREEN,
+        }, {
+                .id     = PM8606_ID_LED,
+                .iset   = PM8606_LED_CURRENT(12),
+                .flags  = PM8606_LED2_BLUE,
+        },
+};
+
+static struct pm860x_platform_data evb3_pm8607_info = {
+        .touch                          = &evb3_touch,
+        .backlight                      = &evb3_backlight[0],
+        .led                            = &evb3_led[0],
+        .companion_addr                 = 0x10,
+        .irq_mode                       = 0,
+        .irq_base                       = IRQ_BOARD_START,
+
+        .i2c_port                       = GI2C_PORT,
+};
+
+static struct i2c_board_info evb3_i2c_info[] = {
+        {
+                .type           = "88PM860x",
+                .addr           = 0x34,
+                .platform_data  = &evb3_pm8607_info,
+                .irq            = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+        },
+};
+
+static void __init evb3_init_i2c(void)
+{
+        pxa_set_i2c_info(NULL);
+        i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
+}
+#else
+static inline void evb3_init_i2c(void) {}
+#endif
+
+static void __init evb3_init(void)
+{
+        /* initialize MFP configurations */
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
+
+        pxa_set_ffuart_info(NULL);
+
+        evb3_init_i2c();
+}
+
+MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
+        .phys_io        = 0x40000000,
+        .boot_params    = 0xa0000100,
+        .map_io         = pxa_map_io,
+        .nr_irqs        = TAVOREVB3_NR_IRQS,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = evb3_init,
+MACHINE_END