[ARM] pxa: make MFP configuration processor independent

There are two reasons for making the MFP configuration to be processor
independent, i.e. removing the relationship of configuration bits with
actual MFPR register settings:

   1. power management sometimes requires the MFP to be configured
      differently when in run mode or in low power mode

   2. for future integration of pxa{25x,27x} GPIO configurations

The modifications include:

1. introducing of processor independent MFP configuration bits, as
   defined in [include/asm-arm/arch-pxa/mfp.h]:

	bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
	bit 10..12 - Alternate Function Selection
	bit 13..15 - Drive Strength
	bit 16..18 - Low Power Mode State
	bit 19..20 - Low Power Mode Edge Detection
	bit 21..22 - Run Mode Pull State
	and so on,

2. moving the processor dependent code from mfp.h into mfp-pxa3xx.h

3. cleaning up of the MFPR bit definitions

4. mapping of processor independent MFP configuration into processor
   specific MFPR register settings is now totally encapsulated within
   pxa3xx_mfp_config()

5. using of "unsigned long" instead of invented type of "mfp_cfg_t"
   according to Documentation/CodingStyle Chapter 5, usage of this
   in platform code will be slowly removed in later patches

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 82 insertions, 15 deletions

diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp.c
index 785ae0ddb84..c66b1cd7df6 100644
--- a/arch/arm/mach-pxa/mfp.c
+++ b/arch/arm/mach-pxa/mfp.c
@@ -20,6 +20,7 @@
 
 #include <asm/hardware.h>
 #include <asm/arch/mfp.h>
+#include <asm/arch/mfp-pxa3xx.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
@@ -28,43 +29,105 @@
 static DEFINE_SPINLOCK(mfp_spin_lock);
 
 static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE);
+
+struct pxa3xx_mfp_pin {
+        unsigned long   config;         /* -1 for not configured */
+        unsigned long   mfpr_off;       /* MFPRxx Register offset */
+        unsigned long   mfpr_run;       /* Run-Mode Register Value */
+        unsigned long   mfpr_lpm;       /* Low Power Mode Register Value */
+};
+
 static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
 
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+const static unsigned long mfpr_lpm[] = {
+        MFPR_LPM_INPUT,
+        MFPR_LPM_DRIVE_LOW,
+        MFPR_LPM_DRIVE_HIGH,
+        MFPR_LPM_PULL_LOW,
+        MFPR_LPM_PULL_HIGH,
+        MFPR_LPM_FLOAT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+const static unsigned long mfpr_pull[] = {
+        MFPR_PULL_NONE,
+        MFPR_PULL_LOW,
+        MFPR_PULL_HIGH,
+        MFPR_PULL_BOTH,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+const static unsigned long mfpr_edge[] = {
+        MFPR_EDGE_NONE,
+        MFPR_EDGE_RISE,
+        MFPR_EDGE_FALL,
+        MFPR_EDGE_BOTH,
+};
+
 #define mfpr_readl(off)                 \
         __raw_readl(mfpr_mmio_base + (off))
 
 #define mfpr_writel(off, val)           \
         __raw_writel(val, mfpr_mmio_base + (off))
 
+#define mfp_configured(p)       ((p)->config != -1)
+
 /*
  * perform a read-back of any MFPR register to make sure the
  * previous writings are finished
  */
 #define mfpr_sync()     (void)__raw_readl(mfpr_mmio_base + 0)
 
-static inline void __mfp_config(int pin, unsigned long val)
+static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p)
 {
-        unsigned long off = mfp_table[pin].mfpr_off;
+        if (mfp_configured(p))
+                mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
 
-        mfp_table[pin].mfpr_val = val;
-        mfpr_writel(off, val);
+static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p)
+{
+        if (mfp_configured(p) && p->mfpr_lpm != p->mfpr_run)
+                mfpr_writel(p->mfpr_off, p->mfpr_lpm);
 }
 
-void pxa3xx_mfp_config(mfp_cfg_t *mfp_cfgs, int num)
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
-        int i, pin;
-        unsigned long val, flags;
-        mfp_cfg_t *mfp_cfg = mfp_cfgs;
+        unsigned long flags;
+        int i;
 
         spin_lock_irqsave(&mfp_spin_lock, flags);
 
-        for (i = 0; i < num; i++, mfp_cfg++) {
-                pin = MFP_CFG_PIN(*mfp_cfg);
-                val = MFP_CFG_VAL(*mfp_cfg);
+        for (i = 0; i < num; i++, mfp_cfgs++) {
+                unsigned long tmp, c = *mfp_cfgs;
+                struct pxa3xx_mfp_pin *p;
+                int pin, af, drv, lpm, edge, pull;
 
+                pin = MFP_PIN(c);
                 BUG_ON(pin >= MFP_PIN_MAX);
-
-                __mfp_config(pin, val);
+                p = &mfp_table[pin];
+
+                af  = MFP_AF(c);
+                drv = MFP_DS(c);
+                lpm = MFP_LPM_STATE(c);
+                edge = MFP_LPM_EDGE(c);
+                pull = MFP_PULL(c);
+
+                /* run-mode pull settings will conflict with MFPR bits of
+                 * low power mode state,  calculate mfpr_run and mfpr_lpm
+                 * individually if pull != MFP_PULL_NONE
+                 */
+                tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+                if (likely(pull == MFP_PULL_NONE)) {
+                        p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+                        p->mfpr_lpm = p->mfpr_run;
+                } else {
+                        p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+                        p->mfpr_run = tmp | mfpr_pull[pull];
+                }
+
+                p->config = c; __mfp_config_run(p);
         }
 
         mfpr_sync();
@@ -110,7 +173,8 @@ void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
 
                 do {
                         mfp_table[i].mfpr_off = offset;
-                        mfp_table[i].mfpr_val = 0;
+                        mfp_table[i].mfpr_run = 0;
+                        mfp_table[i].mfpr_lpm = 0;
                         offset += 4; i++;
                 } while ((i <= p->end) && (p->end != -1));
         }
@@ -120,5 +184,8 @@ void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
 
 void __init pxa3xx_init_mfp(void)
 {
-        memset(mfp_table, 0, sizeof(mfp_table));
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+                mfp_table[i].config = -1;
 }