ARM: OMAP: Fix gpio by switching to generic gpio calls, v2

Fix compile by removing remaining omap specific gpio
calls. Based on earlier patches by Jarkko Nikula.

Also remove old GPIO key code, there is already a patch
to do this with gpio_keys.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

2 files changed, 7 insertions, 59 deletions

diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index bf1e5d32c2a..0a7b24ba165 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -22,8 +22,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/err.h>
@@ -282,65 +280,16 @@ static void __init apollon_led_init(void)
 {
         /* LED0 - AA10 */
         omap_cfg_reg(AA10_242X_GPIO13);
-        omap_request_gpio(LED0_GPIO13);
-        omap_set_gpio_direction(LED0_GPIO13, 0);
-        omap_set_gpio_dataout(LED0_GPIO13, 0);
+        gpio_request(LED0_GPIO13, "LED0");
+        gpio_direction_output(LED0_GPIO13, 0);
         /* LED1  - AA6 */
         omap_cfg_reg(AA6_242X_GPIO14);
-        omap_request_gpio(LED1_GPIO14);
-        omap_set_gpio_direction(LED1_GPIO14, 0);
-        omap_set_gpio_dataout(LED1_GPIO14, 0);
+        gpio_request(LED1_GPIO14, "LED1");
+        gpio_direction_output(LED1_GPIO14, 0);
         /* LED2  - AA4 */
         omap_cfg_reg(AA4_242X_GPIO15);
-        omap_request_gpio(LED2_GPIO15);
-        omap_set_gpio_direction(LED2_GPIO15, 0);
-        omap_set_gpio_dataout(LED2_GPIO15, 0);
-}
-
-static irqreturn_t apollon_sw_interrupt(int irq, void *ignored)
-{
-        static unsigned int led0, led1, led2;
-
-        if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
-                omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
-        else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
-                omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
-        else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
-                omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
-
-        return IRQ_HANDLED;
-}
-
-static void __init apollon_sw_init(void)
-{
-        /* Enter SW - Y11 */
-        omap_cfg_reg(Y11_242X_GPIO16);
-        omap_request_gpio(SW_ENTER_GPIO16);
-        gpio_direction_input(SW_ENTER_GPIO16);
-        /* Up SW - AA12 */
-        omap_cfg_reg(AA12_242X_GPIO17);
-        omap_request_gpio(SW_UP_GPIO17);
-        gpio_direction_input(SW_UP_GPIO17);
-        /* Down SW - AA8 */
-        omap_cfg_reg(AA8_242X_GPIO58);
-        omap_request_gpio(SW_DOWN_GPIO58);
-        gpio_direction_input(SW_DOWN_GPIO58);
-
-        set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
-                                IRQF_SHARED, "enter sw",
-                                &apollon_sw_interrupt))
-                return;
-        set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
-                                IRQF_SHARED, "up sw",
-                                &apollon_sw_interrupt))
-                return;
-        set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
-        if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
-                                IRQF_SHARED, "down sw",
-                                &apollon_sw_interrupt))
-                return;
+        gpio_request(LED2_GPIO15, "LED2");
+        gpio_direction_output(LED2_GPIO15, 0);
 }
 
 static void __init apollon_usb_init(void)
@@ -357,7 +306,6 @@ static void __init omap_apollon_init(void)
         u32 v;
 
         apollon_led_init();
-        apollon_sw_init();
         apollon_flash_init();
         apollon_usb_init();
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index aa6972781e4..f6a13451d1f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void)
 
         ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
-        if (omap_request_gpio(eth_gpio) < 0) {
+        if (gpio_request(eth_gpio, "smc911x irq") < 0) {
                 printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
                                 eth_gpio);
                 return;