ARM: OMAP2420: hwmod data: Add MMC hwmod data for 2420

Add MMC for 2420 so we can pass the DMA request lines the same
way as we already do on omap2430 and later.

Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
[paul@pwsan.com: updated to apply on top of the 3.5 hwmod cleanup;
 changed mmc hwmod name/class to "msdi" as documented in the 2420 TRM Rev X;
 added sysconfig register information; added 16 bit register width flag;
 added MSDI custom reset code]
Signed-off-by: Paul Walmsley <paul@pwsan.com>

1 files changed, 88 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
new file mode 100644
index 00000000000..ef2a6924731
--- /dev/null
+++ b/arch/arm/mach-omap2/msdi.c
@@ -0,0 +1,88 @@
+/*
+ * MSDI IP block reset
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * XXX What about pad muxing?
+ */
+
+#include <linux/kernel.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/mmc.h>
+
+#include "common.h"
+
+/*
+ * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
+ *     from the IP block's base address
+ */
+#define MSDI_CON_OFFSET                         0x0c
+
+/* Register bitfields in the CON register */
+#define MSDI_CON_POW_MASK                       BIT(11)
+#define MSDI_CON_CLKD_MASK                      (0x3f << 0)
+#define MSDI_CON_CLKD_SHIFT                     0
+
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT       10000
+
+/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
+#define MSDI_TARGET_RESET_CLKD          0x3ff
+
+/**
+ * omap_msdi_reset - reset the MSDI IP block
+ * @oh: struct omap_hwmod *
+ *
+ * The MSDI IP block on OMAP2420 has to have both the POW and CLKD
+ * fields set inside its CON register for a reset to complete
+ * successfully.  This is not documented in the TRM.  For CLKD, we use
+ * the value that results in the lowest possible clock rate, to attempt
+ * to avoid disturbing any cards.
+ */
+int omap_msdi_reset(struct omap_hwmod *oh)
+{
+        u16 v = 0;
+        int c = 0;
+
+        /* Write to the SOFTRESET bit */
+        omap_hwmod_softreset(oh);
+
+        /* Enable the MSDI core and internal clock */
+        v |= MSDI_CON_POW_MASK;
+        v |= MSDI_TARGET_RESET_CLKD << MSDI_CON_CLKD_SHIFT;
+        omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
+
+        /* Poll on RESETDONE bit */
+        omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+                           & SYSS_RESETDONE_MASK),
+                          MAX_MODULE_SOFTRESET_WAIT, c);
+
+        if (c == MAX_MODULE_SOFTRESET_WAIT)
+                pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+                           __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+        else
+                pr_debug("%s: %s: softreset in %d usec\n", __func__,
+                         oh->name, c);
+
+        /* Disable the MSDI internal clock */
+        v &= ~MSDI_CON_CLKD_MASK;
+        omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
+
+        return 0;
+}