Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)
  omap: zoom: host should not pull up wl1271's irq line
  arm: plat-omap: iommu: fix request_mem_region() error path
  OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
  omap4: mux: Remove duplicate mux modes
  omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag
  omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set
  omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected
  omap4: board-omap4panda: Initialise the serial pads
  omap3: board-3430sdp: Initialise the serial pads
  omap4: board-4430sdp: Initialise the serial pads
  omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init
  omap2+: mux: Remove the use of IDLE flag
  omap2+: Add separate list for dynamic pads to mux
  perf: add OMAP support for the new power events
  OMAP4: Add IVA OPP enteries.
  OMAP4: Update Voltage Rail Values for MPU, IVA and CORE
  OMAP4: Enable 800 MHz and 1 GHz MPU-OPP
  OMAP3+: OPP: Replace voltage values with Macros
  OMAP3: wdtimer: Fix CORE idle transition
  Watchdog: omap_wdt: add fine grain runtime-pm
  ...

Fix up various conflicts in
 - arch/arm/mach-omap2/board-omap3evm.c
 - arch/arm/mach-omap2/clock3xxx_data.c
 - arch/arm/mach-omap2/usb-musb.c
 - arch/arm/plat-omap/include/plat/usb.h
 - drivers/usb/musb/musb_core.h

1 files changed, 16 insertions, 27 deletions

diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 9be7289cbb5..7b5647954c1 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -401,14 +401,6 @@ static struct omap_dss_board_info cm_t35_dss_data = {
         .default_device = &cm_t35_dvi_device,
 };
 
-static struct platform_device cm_t35_dss_device = {
-        .name           = "omapdss",
-        .id             = -1,
-        .dev            = {
-                .platform_data = &cm_t35_dss_data,
-        },
-};
-
 static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
         .turbo_mode     = 0,
         .single_channel = 1,    /* 0: slave, 1: master */
@@ -468,7 +460,7 @@ static void __init cm_t35_init_display(void)
         msleep(50);
         gpio_set_value(lcd_en_gpio, 1);
 
-        err = platform_device_register(&cm_t35_dss_device);
+        err = omap_display_init(&cm_t35_dss_data);
         if (err) {
                 pr_err("CM-T35: failed to register DSS device\n");
                 goto err_dev_reg;
@@ -495,15 +487,11 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
         .supply                 = "vmmc_aux",
 };
 
-static struct regulator_consumer_supply cm_t35_vdac_supply = {
-        .supply         = "vdda_dac",
-        .dev            = &cm_t35_dss_device.dev,
-};
+static struct regulator_consumer_supply cm_t35_vdac_supply =
+        REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
-static struct regulator_consumer_supply cm_t35_vdvi_supply = {
-        .supply         = "vdvi",
-        .dev            = &cm_t35_dss_device.dev,
-};
+static struct regulator_consumer_supply cm_t35_vdvi_supply =
+        REGULATOR_SUPPLY("vdvi", "omapdss");
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data cm_t35_vmmc1 = {
@@ -680,20 +668,14 @@ static void __init cm_t35_init_i2c(void)
                               ARRAY_SIZE(cm_t35_i2c_boardinfo));
 }
 
-static struct omap_board_config_kernel cm_t35_config[] __initdata = {
-};
-
-static void __init cm_t35_init_irq(void)
+static void __init cm_t35_init_early(void)
 {
-        omap_board_config = cm_t35_config;
-        omap_board_config_size = ARRAY_SIZE(cm_t35_config);
-
         omap2_init_common_infrastructure();
         omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
                              mt46h32m32lf6_sdrc_params);
-        omap_init_irq();
 }
 
+#ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
         /* nCS and IRQ for CM-T35 ethernet */
         OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
@@ -791,6 +773,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 
         { .reg_offset = OMAP_MUX_TERMINATOR },
 };
+#endif
 
 static struct omap_musb_board_data musb_board_data = {
         .interface_type         = MUSB_INTERFACE_ULPI,
@@ -798,8 +781,13 @@ static struct omap_musb_board_data musb_board_data = {
         .power                  = 100,
 };
 
+static struct omap_board_config_kernel cm_t35_config[] __initdata = {
+};
+
 static void __init cm_t35_init(void)
 {
+        omap_board_config = cm_t35_config;
+        omap_board_config_size = ARRAY_SIZE(cm_t35_config);
         omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
         omap_serial_init();
         cm_t35_init_i2c();
@@ -815,9 +803,10 @@ static void __init cm_t35_init(void)
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
         .boot_params    = 0x80000100,
-        .map_io         = omap3_map_io,
         .reserve        = omap_reserve,
-        .init_irq       = cm_t35_init_irq,
+        .map_io         = omap3_map_io,
+        .init_early     = cm_t35_init_early,
+        .init_irq       = omap_init_irq,
         .init_machine   = cm_t35_init,
         .timer          = &omap_timer,
 MACHINE_END