[ARM] 2890/1: OMAP 1/4: Update omap1 specific files, take 2

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Convert more drivers to register resources in board-*.c to take
  advantage of the driver model by David Brownell and Ladislav Michl
- Use set_irq_type() for GPIO interrupts instead of
  omap_set_gpio_edge_ctrl() by David Brownell
- Add minimal support for handling optional add-on boards, such as
  OSK Mistral board with LCD and keypad, by David Brownell
- Minimal support for loading functions to SRAM by Tony Lindgren
- Wake up from serial port by muxing RX lines temporarily into GPIO
  interrupts by Tony Lindgren
- 32KHz sched_clock by Tony Lindgren and Juha Yrjola

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 47 insertions, 15 deletions

diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index e4228198899..209d79ef1d5 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -25,13 +25,14 @@
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
+#include <asm/arch/common.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
 #include <asm/arch/mux.h>
+#include <asm/arch/tc.h>
 #include <asm/arch/usb.h>
-#include <asm/arch/common.h>
 
 extern void omap_init_time(void);
 extern int omap_gpio_init(void);
@@ -86,6 +87,27 @@ static int __init ext_uart_init(void)
 }
 arch_initcall(ext_uart_init);
 
+static struct flash_platform_data voiceblue_flash_data = {
+        .map_name       = "cfi_probe",
+        .width          = 2,
+};
+
+static struct resource voiceblue_flash_resource = {
+        .start  = OMAP_CS0_PHYS,
+        .end    = OMAP_CS0_PHYS + SZ_32M - 1,
+        .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device voiceblue_flash_device = {
+        .name           = "omapflash",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &voiceblue_flash_data,
+        },
+        .num_resources  = 1,
+        .resource       = &voiceblue_flash_resource,
+};
+
 static struct resource voiceblue_smc91x_resources[] = {
         [0] = {
                 .start  = OMAP_CS2_PHYS + 0x300,
@@ -107,6 +129,7 @@ static struct platform_device voiceblue_smc91x_device = {
 };
 
 static struct platform_device *voiceblue_devices[] __initdata = {
+        &voiceblue_flash_device,
         &voiceblue_smc91x_device,
 };
 
@@ -119,8 +142,17 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
         .pins[2]        = 6,
 };
 
+static struct omap_mmc_config voiceblue_mmc_config __initdata = {
+        .mmc[0] = {
+                .enabled        = 1,
+                .power_pin      = 2,
+                .switch_pin     = -1,
+        },
+};
+
 static struct omap_board_config_kernel voiceblue_config[] = {
         { OMAP_TAG_USB, &voiceblue_usb_config },
+        { OMAP_TAG_MMC, &voiceblue_mmc_config },
 };
 
 static void __init voiceblue_init_irq(void)
@@ -131,9 +163,6 @@ static void __init voiceblue_init_irq(void)
 
 static void __init voiceblue_init(void)
 {
-        /* There is a good chance board is going up, so enable Power LED
-         * (it is connected through invertor) */
-        omap_writeb(0x00, OMAP_LPG1_LCR);
         /* Watchdog */
         omap_request_gpio(0);
         /* smc91x reset */
@@ -145,7 +174,6 @@ static void __init voiceblue_init(void)
         mdelay(50);     /* 50ms until PHY ready */
         /* smc91x interrupt pin */
         omap_request_gpio(8);
-        omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
         /* 16C554 reset*/
         omap_request_gpio(6);
         omap_set_gpio_direction(6, 0);
@@ -155,14 +183,19 @@ static void __init voiceblue_init(void)
         omap_request_gpio(13);
         omap_request_gpio(14);
         omap_request_gpio(15);
-        omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
-        omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
-        omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
-        omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
+        set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
+        set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
 
         platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
         omap_board_config = voiceblue_config;
         omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+
+        /* There is a good chance board is going up, so enable power LED
+         * (it is connected through invertor) */
+        omap_writeb(0x00, OMAP_LPG1_LCR);
+        omap_writeb(0x00, OMAP_LPG1_PMR);       /* Disable clock */
 }
 
 static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
@@ -184,9 +217,9 @@ static int panic_event(struct notifier_block *this, unsigned long event,
         if (test_and_set_bit(MACHINE_PANICED, &machine_state))
                 return NOTIFY_DONE;
 
-        /* Flash Power LED
-         * (TODO: Enable clock right way (enabled in bootloader already)) */
+        /* Flash power LED */
         omap_writeb(0x78, OMAP_LPG1_LCR);
+        omap_writeb(0x01, OMAP_LPG1_PMR);       /* Enable clock */
 
         return NOTIFY_DONE;
 }
@@ -195,15 +228,14 @@ static struct notifier_block panic_block = {
         .notifier_call  = panic_event,
 };
 
-static int __init setup_notifier(void)
+static int __init voiceblue_setup(void)
 {
         /* Setup panic notifier */
         notifier_chain_register(&panic_notifier_list, &panic_block);
 
         return 0;
 }
-
-postcore_initcall(setup_notifier);
+postcore_initcall(voiceblue_setup);
 
 static int wdt_gpio_state;