Merge tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6 into next/fixes-non-critical

* tag 'imx25-iomux-ds' of git://git.pengutronix.de/git/imx/linux-2.6:
   iomux-mx25.h slew rate adjusted for LCD __LD pins

(update to v3.3-rc6)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

3 files changed, 40 insertions, 7 deletions

diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
index 2667f52e3b0..9e3b90df32e 100644
--- a/arch/arm/mach-lpc32xx/include/mach/irqs.h
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -61,7 +61,7 @@
  */
 #define IRQ_LPC32XX_JTAG_COMM_TX        LPC32XX_SIC1_IRQ(1)
 #define IRQ_LPC32XX_JTAG_COMM_RX        LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11              LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28              LPC32XX_SIC1_IRQ(4)
 #define IRQ_LPC32XX_TS_P                LPC32XX_SIC1_IRQ(6)
 #define IRQ_LPC32XX_TS_IRQ              LPC32XX_SIC1_IRQ(7)
 #define IRQ_LPC32XX_TS_AUX              LPC32XX_SIC1_IRQ(8)
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
index 4eae566dfdc..c74de01ab5b 100644
--- a/arch/arm/mach-lpc32xx/irq.c
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
                 .event_group = &lpc32xx_event_pin_regs,
                 .mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
         },
+        [IRQ_LPC32XX_GPI_28] = {
+                .event_group = &lpc32xx_event_pin_regs,
+                .mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+        },
         [IRQ_LPC32XX_GPIO_00] = {
                 .event_group = &lpc32xx_event_int_regs,
                 .mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 
                 if (state)
                         eventreg |= lpc32xx_events[d->irq].mask;
-                else
+                else {
                         eventreg &= ~lpc32xx_events[d->irq].mask;
 
+                        /*
+                         * When disabling the wakeup, clear the latched
+                         * event
+                         */
+                        __raw_writel(lpc32xx_events[d->irq].mask,
+                                lpc32xx_events[d->irq].
+                                event_group->rawstat_reg);
+                }
+
                 __raw_writel(eventreg,
                         lpc32xx_events[d->irq].event_group->enab_reg);
 
@@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
 
         /* Setup SIC1 */
         __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-        __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-        __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+        __raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+        __raw_writel(SIC1_ATR_DEFAULT,
+                                LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
 
         /* Setup SIC2 */
         __raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-        __raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-        __raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+        __raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+        __raw_writel(SIC2_ATR_DEFAULT,
+                                LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
 
         /* Configure supported IRQ's */
         for (i = 0; i < NR_IRQS; i++) {
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 429cfdbb2b3..f2735281616 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -88,6 +88,7 @@ struct uartinit {
         char *uart_ck_name;
         u32 ck_mode_mask;
         void __iomem *pdiv_clk_reg;
+        resource_size_t mapbase;
 };
 
 static struct uartinit uartinit_data[] __initdata = {
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
                 .ck_mode_mask =
                         LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
                 .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+                .mapbase = LPC32XX_UART5_BASE,
         },
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
                 .ck_mode_mask =
                         LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
                 .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+                .mapbase = LPC32XX_UART3_BASE,
         },
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
                 .ck_mode_mask =
                         LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
                 .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+                .mapbase = LPC32XX_UART4_BASE,
         },
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
                 .ck_mode_mask =
                         LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
                 .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+                .mapbase = LPC32XX_UART6_BASE,
         },
 #endif
 };
@@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
 
                 /* pre-UART clock divider set to 1 */
                 __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+                /*
+                 * Force a flush of the RX FIFOs to work around a
+                 * HW bug
+                 */
+                puart = uartinit_data[i].mapbase;
+                __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+                __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+                j = LPC32XX_SUART_FIFO_SIZE;
+                while (j--)
+                        tmp = __raw_readl(
+                                LPC32XX_UART_DLL_FIFO(puart));
+                __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
         }
 
         /* This needs to be done after all UART clocks are setup */
         __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-        for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+        for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
                 /* Force a flush of the RX FIFOs to work around a HW bug */
                 puart = serial_std_platform_data[i].mapbase;
                 __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));