ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock

at91 slow-clock resume: Don't wait for a disabled PLL to lock.

We run into this problem with the PLLB on the at91: ohci-at91 disables
the PLLB when going to suspend. The slowclock code however tries to do
the same: It saves the PLLB register value and when restoring the value
during resume, it waits for the PLLB to lock again. However the PLL will
never lock and the loop would run into its timeout because the slowclock
code just stored and restored an empty register.
This fixes the problem by only restoring PLLA/PLLB when they were enabled
at suspend time.

Cc: Andrew Victor <avictor.za@gmail.com>
Signed-off-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 12 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 987fab3d846..9fcbd6ca009 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -205,13 +205,25 @@ ENTRY(at91_slow_clock)
         ldr     r3, .saved_pllbr
         str     r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 
+        tst     r3, #(AT91_PMC_MUL &  0xff0000)
+        bne     1f
+        tst     r3, #(AT91_PMC_MUL & ~0xff0000)
+        beq     2f
+1:
         wait_pllblock
+2:
 
         /* Restore PLLA setting */
         ldr     r3, .saved_pllar
         str     r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 
+        tst     r3, #(AT91_PMC_MUL &  0xff0000)
+        bne     3f
+        tst     r3, #(AT91_PMC_MUL & ~0xff0000)
+        beq     4f
+3:
         wait_pllalock
+4:
 
 #ifdef SLOWDOWN_MASTER_CLOCK
         /*