Input: egalax_ts - get gpio from devicetree

The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework
and don't support this API anymore.

The i.MX6q sabrelite platform equips an egalax touchscreen controller,
and this platform already transfered to GENERIC_GPIO framework, to
support this driver, we use a more generic way to get gpio.

Add a return value checking for waking up the controller in the probe
function, this guarantee only a workable device can pass init.

[dmitry.torokhov@gmail.com: Make driver depend on CONFIG_OF as it is
 now required.]

Acked-by Zhang Jiejing <jiejing.zhang@freescale.com>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1 files changed, 19 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 00000000000..df70318a617
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+        egalax_ts@04 {
+                compatible = "eeti,egalax_ts";
+                reg = <0x04>;
+                interrupt-parent = <&gpio1>;
+                interrupts = <9 2>;
+                wakeup-gpios = <&gpio1 9 0>;
+        };