imx/mx3: depend on USB_ULPI for otg_ulpi_create

otg_ulpi_create is defined in drivers/usb/otg/ulpi.c which depends on
CONFIG_USB_ULPI.  So protect its usage by the same symbol.  Moreover
mxc_ulpi_access_ops needs CONFIG_MXC_ULPI.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Valentin Longchamp <valentin.longchamp@epfl.ch>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 11 insertions, 1 deletions

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index ea8ed109a7c..28294416b0a 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -49,6 +49,7 @@ config MACH_PCM037_EET
 config MACH_MX31LITE
         bool "Support MX31 LITEKIT (LogicPD)"
         select ARCH_MX31
+        select MXC_ULPI if USB_ULPI
         help
           Include support for MX31 LITEKIT platform. This includes specific
           configurations for the board and its peripherals.
@@ -63,7 +64,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
         bool "Support mx31moboard platforms (EPFL Mobots group)"
         select ARCH_MX31
-        select MXC_ULPI
+        select MXC_ULPI if USB_ULPI
         help
           Include support for mx31moboard platform. This includes specific
           configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 4697164943d..789b20d1730 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
  * USB
  */
 
+#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
                         PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
         .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
         .flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
+#endif
 
 /*
  * NOR flash
@@ -256,11 +258,13 @@ static void __init mxc_board_init(void)
         mxc_register_device(&mxc_spi_device1, &spi1_pdata);
         spi_register_board_info(&mc13783_spi_dev, 1);
 
+#if defined(CONFIG_USB_ULPI)
         /* USB */
         usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
                                 USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
         mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 
         /* SMSC9117 IRQ pin */
         ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 839f09aef8b..cfd605d078e 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = {
         .phy_mode       = FSL_USB2_PHY_ULPI,
 };
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
@@ -394,6 +396,9 @@ static int __init moboard_usbh2_init(void)
 
         return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 }
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
 
 
 static struct gpio_led mx31moboard_leds[] = {