ARM: mx5/babbage: Use gpio_request_one in babbage_fec_reset

Current code inside babbage_fec_reset uses gpio_direction_output with initial value of the GPIO and also sets
the GPIO value via gpio_set_value to the same level right after. This is not needed.

By using gpio_request_one it is possible to set the direction and initial value in one shot.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 2 insertions, 3 deletions

diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index b2ecd194e76..bea4e4135f9 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -228,13 +228,12 @@ static inline void babbage_fec_reset(void)
         int ret;
 
         /* reset FEC PHY */
-        ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+        ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
+                                        GPIOF_OUT_INIT_LOW, "fec-phy-reset");
         if (ret) {
                 printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
                 return;
         }
-        gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
-        gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
         msleep(1);
         gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
 }