i2c-i801: Remove verbose debugging messages

Dumping the register values before and after every transaction was
useful during driver development but now it's only spamming the log.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 0 insertions, 18 deletions

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9717ffe1292..965905fb5d5 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -138,11 +138,6 @@ static int i801_transaction(int xact)
         int result = 0;
         int timeout = 0;
 
-        dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
-                "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
-                inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
-                inb_p(SMBHSTDAT1));
-
         /* Make sure the SMBus host is ready to start transmitting */
         /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
         if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
@@ -202,10 +197,6 @@ static int i801_transaction(int xact)
                 dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
                         "(%02x)\n", temp);
         }
-        dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
-                "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
-                inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
-                inb_p(SMBHSTDAT1));
         return result;
 }
 
@@ -293,11 +284,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
                 }
                 outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
 
-                dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
-                        "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
-                        inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
-                        inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
-
                 /* Make sure the SMBus host is ready to start transmitting */
                 temp = inb_p(SMBHSTSTS);
                 if (i == 1) {
@@ -381,10 +367,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
                                 "Bad status (%02x) at end of transaction\n",
                                 temp);
                 }
-                dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
-                        "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
-                        inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
-                        inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
 
                 if (result < 0)
                         return result;