x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUs

We need to fall back from logical-flat APIC mode to physical-flat mode
when we have more than 8 CPUs.  However, in the presence of CPU
hotplug(with bios listing not enabled but possible cpus as disabled cpus in
MADT), we have to consider the number of possible CPUs rather than
the number of current CPUs; otherwise we may cross the 8-CPU boundary
when CPUs are added later.

32bit apic code can use more cleanups (like the removal of vendor checks in
32bit default_setup_apic_routing()) and more unifications with 64bit code.
Yinghai has some patches in works already. This patch addresses the boot issue
that is reported in the virtualization guest context.

[ hpa: incorporated function annotation feedback from Yinghai Lu ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com>
Acked-by: Shaohui Zheng <shaohui.zheng@intel.com>
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

6 files changed, 28 insertions, 34 deletions

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 036d28adf59..0acbcdfa5ca 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1185,9 +1185,6 @@ static void __init acpi_process_madt(void)
                 if (!error) {
                         acpi_lapic = 1;
 
-#ifdef CONFIG_X86_BIGSMP
-                        generic_bigsmp_probe();
-#endif
                         /*
                          * Parse MADT IO-APIC entries
                          */
@@ -1197,8 +1194,6 @@ static void __init acpi_process_madt(void)
                                 acpi_ioapic = 1;
 
                                 smp_found_config = 1;
-                                if (apic->setup_apic_routing)
-                                        apic->setup_apic_routing();
                         }
                 }
                 if (error == -EINVAL) {
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3987e4408f7..dfca210f6a1 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1641,9 +1641,7 @@ int __init APIC_init_uniprocessor(void)
 #endif
 
         enable_IR_x2apic();
-#ifdef CONFIG_X86_64
         default_setup_apic_routing();
-#endif
 
         verify_local_APIC();
         connect_bsp_APIC();
@@ -1891,21 +1889,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
         if (apicid > max_physical_apicid)
                 max_physical_apicid = apicid;
 
-#ifdef CONFIG_X86_32
-        if (num_processors > 8) {
-                switch (boot_cpu_data.x86_vendor) {
-                case X86_VENDOR_INTEL:
-                        if (!APIC_XAPIC(version)) {
-                                def_to_bigsmp = 0;
-                                break;
-                        }
-                        /* If P4 and above fall through */
-                case X86_VENDOR_AMD:
-                        def_to_bigsmp = 1;
-                }
-        }
-#endif
-
 #if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
         early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
         early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 1a6559f6768..99d2fe01608 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -52,7 +52,32 @@ static int __init print_ipi_mode(void)
 }
 late_initcall(print_ipi_mode);
 
-void default_setup_apic_routing(void)
+void __init default_setup_apic_routing(void)
+{
+        int version = apic_version[boot_cpu_physical_apicid];
+
+        if (num_possible_cpus() > 8) {
+                switch (boot_cpu_data.x86_vendor) {
+                case X86_VENDOR_INTEL:
+                        if (!APIC_XAPIC(version)) {
+                                def_to_bigsmp = 0;
+                                break;
+                        }
+                        /* If P4 and above fall through */
+                case X86_VENDOR_AMD:
+                        def_to_bigsmp = 1;
+                }
+        }
+
+#ifdef CONFIG_X86_BIGSMP
+        generic_bigsmp_probe();
+#endif
+
+        if (apic->setup_apic_routing)
+                apic->setup_apic_routing();
+}
+
+static void setup_apic_flat_routing(void)
 {
 #ifdef CONFIG_X86_IO_APIC
         printk(KERN_INFO
@@ -103,7 +128,7 @@ struct apic apic_default = {
         .init_apic_ldr                  = default_init_apic_ldr,
 
         .ioapic_phys_id_map             = default_ioapic_phys_id_map,
-        .setup_apic_routing             = default_setup_apic_routing,
+        .setup_apic_routing             = setup_apic_flat_routing,
         .multi_timer_check              = NULL,
         .apicid_to_node                 = default_apicid_to_node,
         .cpu_to_logical_apicid          = default_cpu_to_logical_apicid,
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 450fe2064a1..83e9be4778e 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -67,7 +67,7 @@ void __init default_setup_apic_routing(void)
         }
 #endif
 
-        if (apic == &apic_flat && num_processors > 8)
+        if (apic == &apic_flat && num_possible_cpus() > 8)
                         apic = &apic_physflat;
 
         printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 40b54ceb68b..a2c1edd2d3a 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -359,13 +359,6 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
                 x86_init.mpparse.mpc_record(1);
         }
 
-#ifdef CONFIG_X86_BIGSMP
-        generic_bigsmp_probe();
-#endif
-
-        if (apic->setup_apic_routing)
-                apic->setup_apic_routing();
-
         if (!num_processors)
                 printk(KERN_ERR "MPTABLE: no processors registered!\n");
         return num_processors;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 678d0b8c26f..b4e870cbdc6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1083,9 +1083,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
         set_cpu_sibling_map(0);
 
         enable_IR_x2apic();
-#ifdef CONFIG_X86_64
         default_setup_apic_routing();
-#endif
 
         if (smp_sanity_check(max_cpus) < 0) {
                 printk(KERN_INFO "SMP disabled\n");