ixgbe: Change Direct Attach Twinax cable detection for SFP+ NICs

The SFF specification for Direct Attach cable detection has now been
ratified.  Previously, DA cable detect was looking at the Twinaxial bit in
byte 9 of the SFP+ EEPROM.  The spec now defines active and passive DA
cables in byte 8 of the SFP+ EEPROM.  This patch changes the cable
detection for both 82598 and 82599 SFP+ adapters to conform to the new
spec.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 11 insertions, 13 deletions

diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 6d385ea3c2a..8210b49aeff 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -527,7 +527,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
         u8 comp_codes_1g = 0;
         u8 comp_codes_10g = 0;
         u8 oui_bytes[3] = {0, 0, 0};
-        u8 transmission_media = 0;
+        u8 cable_tech = 0;
         u16 enforce_sfp = 0;
 
         status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
@@ -543,8 +543,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                                             &comp_codes_1g);
                 hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES,
                                             &comp_codes_10g);
-                hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_TRANSMISSION_MEDIA,
-                                            &transmission_media);
+                hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY,
+                                            &cable_tech);
 
                 /* ID Module
                  * =========
@@ -557,7 +557,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                  * 6    SFP_SR/LR_CORE1 - 82599-specific
                  */
                 if (hw->mac.type == ixgbe_mac_82598EB) {
-                        if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+                        if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
                                 hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
                         else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
                                 hw->phy.sfp_type = ixgbe_sfp_type_sr;
@@ -566,7 +566,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                         else
                                 hw->phy.sfp_type = ixgbe_sfp_type_unknown;
                 } else if (hw->mac.type == ixgbe_mac_82599EB) {
-                        if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE)
+                        if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
                                 if (hw->bus.lan_id == 0)
                                         hw->phy.sfp_type =
                                                      ixgbe_sfp_type_da_cu_core0;
@@ -621,8 +621,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 
                         switch (vendor_oui) {
                         case IXGBE_SFF_VENDOR_OUI_TYCO:
-                                if (transmission_media &
-                                    IXGBE_SFF_TWIN_AX_CAPABLE)
+                                if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
                                         hw->phy.type = ixgbe_phy_tw_tyco;
                                 break;
                         case IXGBE_SFF_VENDOR_OUI_FTL:
@@ -635,8 +634,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                                 hw->phy.type = ixgbe_phy_sfp_intel;
                                 break;
                         default:
-                                if (transmission_media &
-                                    IXGBE_SFF_TWIN_AX_CAPABLE)
+                                if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
                                         hw->phy.type = ixgbe_phy_tw_unknown;
                                 else
                                         hw->phy.type = ixgbe_phy_sfp_unknown;
@@ -644,8 +642,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
                         }
                 }
 
-                /* All DA cables are supported */
-                if (transmission_media & IXGBE_SFF_TWIN_AX_CAPABLE) {
+                /* All passive DA cables are supported */
+                if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
                         status = 0;
                         goto out;
                 }
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index c9964b7ce1b..9b700f5bf1e 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -39,10 +39,10 @@
 #define IXGBE_SFF_VENDOR_OUI_BYTE2   0x27
 #define IXGBE_SFF_1GBE_COMP_CODES    0x6
 #define IXGBE_SFF_10GBE_COMP_CODES   0x3
-#define IXGBE_SFF_TRANSMISSION_MEDIA 0x9
+#define IXGBE_SFF_CABLE_TECHNOLOGY   0x8
 
 /* Bitmasks */
-#define IXGBE_SFF_TWIN_AX_CAPABLE            0x80
+#define IXGBE_SFF_DA_PASSIVE_CABLE           0x4
 #define IXGBE_SFF_1GBASESX_CAPABLE           0x1
 #define IXGBE_SFF_1GBASELX_CAPABLE           0x2
 #define IXGBE_SFF_10GBASESR_CAPABLE          0x10