[POWERPC] Created arch/powerpc/platforms/Kconfig for "Platform support"

Split "Platform support" menu out from arch/powerpc/Kconfig into
arch/powerpc/platforms/Kconfig in prep for allowing other sub-arches to
be configured via a single "Platform support" menu.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 220 insertions, 219 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c5014ba19fd..20aae16cbad 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -367,225 +367,7 @@ endmenu
 
 source "init/Kconfig"
 
-menu "Platform support"
-        depends on PPC64 || CLASSIC32
-
-choice
-        prompt "Machine type"
-        default PPC_MULTIPLATFORM
-
-config PPC_MULTIPLATFORM
-        bool "Generic desktop/server/laptop"
-        help
-          Select this option if configuring for an IBM pSeries or
-          RS/6000 machine, an Apple machine, or a PReP, CHRP,
-          Maple or Cell-based machine.
-
-config EMBEDDED6xx
-        bool "Embedded 6xx/7xx/7xxx-based board"
-        depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
-
-config APUS
-        bool "Amiga-APUS"
-        depends on PPC32 && BROKEN
-        help
-          Select APUS if configuring for a PowerUP Amiga.
-          More information is available at:
-          <http://linux-apus.sourceforge.net/>.
-endchoice
-
-config QUICC_ENGINE
-        bool
-        depends on PPC_MPC836x || PPC_MPC832x
-        default y
-        help
-          The QUICC Engine (QE) is a new generation of communications
-          coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
-          Selecting this option means that you wish to build a kernel
-          for a machine with a QE coprocessor.
-
-source "arch/powerpc/platforms/pseries/Kconfig"
-source "arch/powerpc/platforms/iseries/Kconfig"
-source "arch/powerpc/platforms/chrp/Kconfig"
-source "arch/powerpc/platforms/52xx/Kconfig"
-source "arch/powerpc/platforms/powermac/Kconfig"
-source "arch/powerpc/platforms/prep/Kconfig"
-source "arch/powerpc/platforms/maple/Kconfig"
-source "arch/powerpc/platforms/pasemi/Kconfig"
-source arch/powerpc/platforms/celleb/Kconfig
-source arch/powerpc/platforms/ps3/Kconfig
-source arch/powerpc/platforms/cell/Kconfig
-
-config PPC_NATIVE
-        bool
-        depends on PPC_MULTIPLATFORM
-        help
-          Support for running natively on the hardware, i.e. without
-          a hypervisor. This option is not user-selectable but should
-          be selected by all platforms that need it.
-
-config UDBG_RTAS_CONSOLE
-        bool "RTAS based debug console"
-        depends on PPC_RTAS
-        default n
-
-config PPC_UDBG_BEAT
-        bool "BEAT based debug console"
-        depends on PPC_CELLEB
-        default n
-
-config XICS
-        depends on PPC_PSERIES
-        bool
-        default y
-
-config U3_DART
-        bool 
-        depends on PPC_MULTIPLATFORM && PPC64
-        default n
-
-config PPC_RTAS
-        bool
-        default n
-
-config RTAS_ERROR_LOGGING
-        bool
-        depends on PPC_RTAS
-        default n
-
-config RTAS_PROC
-        bool "Proc interface to RTAS"
-        depends on PPC_RTAS
-        default y
-
-config RTAS_FLASH
-        tristate "Firmware flash interface"
-        depends on PPC64 && RTAS_PROC
-
-config PPC_PMI
-        tristate "Support for PMI"
-        depends PPC_IBM_CELL_BLADE
-        help
-          PMI (Platform Management Interrupt) is a way to
-          communicate with the BMC (Baseboard Mangement Controller).
-          It is used in some IBM Cell blades.
-        default m
-
-config MMIO_NVRAM
-        bool
-        default n
-
-config MPIC_BROKEN_U3
-        bool
-        depends on PPC_MAPLE
-        default y
-
-config IBMVIO
-        depends on PPC_PSERIES || PPC_ISERIES
-        bool
-        default y
-
-config IBMEBUS
-        depends on PPC_PSERIES
-        bool "Support for GX bus based adapters"
-        help
-          Bus device driver for GX bus based adapters.
-
-config PPC_MPC106
-        bool
-        default n
-
-config PPC_970_NAP
-        bool
-        default n
-
-config PPC_INDIRECT_IO
-        bool
-        select GENERIC_IOMAP
-        default n
-
-config GENERIC_IOMAP
-        bool
-        default n
-
-source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_PMAC
-        bool "Support for Apple PowerBooks"
-        depends on CPU_FREQ && ADB_PMU && PPC32
-        select CPU_FREQ_TABLE
-        help
-          This adds support for frequency switching on Apple PowerBooks,
-          this currently includes some models of iBook & Titanium
-          PowerBook.
-
-config CPU_FREQ_PMAC64
-        bool "Support for some Apple G5s"
-        depends on CPU_FREQ && PPC64
-        select CPU_FREQ_TABLE
-        help
-          This adds support for frequency switching on Apple iMac G5,
-          and some of the more recent desktop G5 machines as well.
-
-config PPC601_SYNC_FIX
-        bool "Workarounds for PPC601 bugs"
-        depends on 6xx && (PPC_PREP || PPC_PMAC)
-        help
-          Some versions of the PPC601 (the first PowerPC chip) have bugs which
-          mean that extra synchronization instructions are required near
-          certain instructions, typically those that make major changes to the
-          CPU state.  These extra instructions reduce performance slightly.
-          If you say N here, these extra instructions will not be included,
-          resulting in a kernel which will run faster but may not run at all
-          on some systems with the PPC601 chip.
-
-          If in doubt, say Y here.
-
-config TAU
-        bool "On-chip CPU temperature sensor support"
-        depends on 6xx
-        help
-          G3 and G4 processors have an on-chip temperature sensor called the
-          'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
-          temperature within 2-4 degrees Celsius. This option shows the current
-          on-die temperature in /proc/cpuinfo if the cpu supports it.
-
-          Unfortunately, on some chip revisions, this sensor is very inaccurate
-          and in many cases, does not work at all, so don't assume the cpu
-          temp is actually what /proc/cpuinfo says it is.
-
-config TAU_INT
-        bool "Interrupt driven TAU driver (DANGEROUS)"
-        depends on TAU
-        ---help---
-          The TAU supports an interrupt driven mode which causes an interrupt
-          whenever the temperature goes out of range. This is the fastest way
-          to get notified the temp has exceeded a range. With this option off,
-          a timer is used to re-check the temperature periodically.
-
-          However, on some cpus it appears that the TAU interrupt hardware
-          is buggy and can cause a situation which would lead unexplained hard
-          lockups.
-
-          Unless you are extending the TAU driver, or enjoy kernel/hardware
-          debugging, leave this option off.
-
-config TAU_AVERAGE
-        bool "Average high and low temp"
-        depends on TAU
-        ---help---
-          The TAU hardware can compare the temperature to an upper and lower
-          bound.  The default behavior is to show both the upper and lower
-          bound in /proc/cpuinfo. If the range is large, the temperature is
-          either changing a lot, or the TAU hardware is broken (likely on some
-          G4's). If the range is small (around 4 degrees), the temperature is
-          relatively stable.  If you say Y here, a single temperature value,
-          halfway between the upper and lower bounds, will be reported in
-          /proc/cpuinfo.
-
-          If in doubt, say N here.
-
-endmenu
+source "arch/powerpc/platforms/Kconfig"
 
 source arch/powerpc/platforms/embedded6xx/Kconfig
 source arch/powerpc/platforms/4xx/Kconfig
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
new file mode 100644
index 00000000000..388a1bdd28e
--- /dev/null
+++ b/arch/powerpc/platforms/Kconfig
@@ -0,0 +1,219 @@
+menu "Platform support"
+        depends on PPC64 || CLASSIC32
+
+choice
+        prompt "Machine type"
+        default PPC_MULTIPLATFORM
+
+config PPC_MULTIPLATFORM
+        bool "Generic desktop/server/laptop"
+        help
+          Select this option if configuring for an IBM pSeries or
+          RS/6000 machine, an Apple machine, or a PReP, CHRP,
+          Maple or Cell-based machine.
+
+config EMBEDDED6xx
+        bool "Embedded 6xx/7xx/7xxx-based board"
+        depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
+
+config APUS
+        bool "Amiga-APUS"
+        depends on PPC32 && BROKEN
+        help
+          Select APUS if configuring for a PowerUP Amiga.
+          More information is available at:
+          <http://linux-apus.sourceforge.net/>.
+endchoice
+
+config QUICC_ENGINE
+        bool
+        depends on PPC_MPC836x || PPC_MPC832x
+        default y
+        help
+          The QUICC Engine (QE) is a new generation of communications
+          coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+          Selecting this option means that you wish to build a kernel
+          for a machine with a QE coprocessor.
+
+source "arch/powerpc/platforms/pseries/Kconfig"
+source "arch/powerpc/platforms/iseries/Kconfig"
+source "arch/powerpc/platforms/chrp/Kconfig"
+source "arch/powerpc/platforms/52xx/Kconfig"
+source "arch/powerpc/platforms/powermac/Kconfig"
+source "arch/powerpc/platforms/prep/Kconfig"
+source "arch/powerpc/platforms/maple/Kconfig"
+source "arch/powerpc/platforms/pasemi/Kconfig"
+source arch/powerpc/platforms/celleb/Kconfig
+source arch/powerpc/platforms/ps3/Kconfig
+source arch/powerpc/platforms/cell/Kconfig
+
+config PPC_NATIVE
+        bool
+        depends on PPC_MULTIPLATFORM
+        help
+          Support for running natively on the hardware, i.e. without
+          a hypervisor. This option is not user-selectable but should
+          be selected by all platforms that need it.
+
+config UDBG_RTAS_CONSOLE
+        bool "RTAS based debug console"
+        depends on PPC_RTAS
+        default n
+
+config PPC_UDBG_BEAT
+        bool "BEAT based debug console"
+        depends on PPC_CELLEB
+        default n
+
+config XICS
+        depends on PPC_PSERIES
+        bool
+        default y
+
+config U3_DART
+        bool
+        depends on PPC_MULTIPLATFORM && PPC64
+        default n
+
+config PPC_RTAS
+        bool
+        default n
+
+config RTAS_ERROR_LOGGING
+        bool
+        depends on PPC_RTAS
+        default n
+
+config RTAS_PROC
+        bool "Proc interface to RTAS"
+        depends on PPC_RTAS
+        default y
+
+config RTAS_FLASH
+        tristate "Firmware flash interface"
+        depends on PPC64 && RTAS_PROC
+
+config PPC_PMI
+        tristate "Support for PMI"
+        depends PPC_IBM_CELL_BLADE
+        help
+          PMI (Platform Management Interrupt) is a way to
+          communicate with the BMC (Baseboard Mangement Controller).
+          It is used in some IBM Cell blades.
+        default m
+
+config MMIO_NVRAM
+        bool
+        default n
+
+config MPIC_BROKEN_U3
+        bool
+        depends on PPC_MAPLE
+        default y
+
+config IBMVIO
+        depends on PPC_PSERIES || PPC_ISERIES
+        bool
+        default y
+
+config IBMEBUS
+        depends on PPC_PSERIES
+        bool "Support for GX bus based adapters"
+        help
+          Bus device driver for GX bus based adapters.
+
+config PPC_MPC106
+        bool
+        default n
+
+config PPC_970_NAP
+        bool
+        default n
+
+config PPC_INDIRECT_IO
+        bool
+        select GENERIC_IOMAP
+        default n
+
+config GENERIC_IOMAP
+        bool
+        default n
+
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ_PMAC
+        bool "Support for Apple PowerBooks"
+        depends on CPU_FREQ && ADB_PMU && PPC32
+        select CPU_FREQ_TABLE
+        help
+          This adds support for frequency switching on Apple PowerBooks,
+          this currently includes some models of iBook & Titanium
+          PowerBook.
+
+config CPU_FREQ_PMAC64
+        bool "Support for some Apple G5s"
+        depends on CPU_FREQ && PPC64
+        select CPU_FREQ_TABLE
+        help
+          This adds support for frequency switching on Apple iMac G5,
+          and some of the more recent desktop G5 machines as well.
+
+config PPC601_SYNC_FIX
+        bool "Workarounds for PPC601 bugs"
+        depends on 6xx && (PPC_PREP || PPC_PMAC)
+        help
+          Some versions of the PPC601 (the first PowerPC chip) have bugs which
+          mean that extra synchronization instructions are required near
+          certain instructions, typically those that make major changes to the
+          CPU state.  These extra instructions reduce performance slightly.
+          If you say N here, these extra instructions will not be included,
+          resulting in a kernel which will run faster but may not run at all
+          on some systems with the PPC601 chip.
+
+          If in doubt, say Y here.
+
+config TAU
+        bool "On-chip CPU temperature sensor support"
+        depends on 6xx
+        help
+          G3 and G4 processors have an on-chip temperature sensor called the
+          'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+          temperature within 2-4 degrees Celsius. This option shows the current
+          on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+          Unfortunately, on some chip revisions, this sensor is very inaccurate
+          and in many cases, does not work at all, so don't assume the cpu
+          temp is actually what /proc/cpuinfo says it is.
+
+config TAU_INT
+        bool "Interrupt driven TAU driver (DANGEROUS)"
+        depends on TAU
+        ---help---
+          The TAU supports an interrupt driven mode which causes an interrupt
+          whenever the temperature goes out of range. This is the fastest way
+          to get notified the temp has exceeded a range. With this option off,
+          a timer is used to re-check the temperature periodically.
+
+          However, on some cpus it appears that the TAU interrupt hardware
+          is buggy and can cause a situation which would lead unexplained hard
+          lockups.
+
+          Unless you are extending the TAU driver, or enjoy kernel/hardware
+          debugging, leave this option off.
+
+config TAU_AVERAGE
+        bool "Average high and low temp"
+        depends on TAU
+        ---help---
+          The TAU hardware can compare the temperature to an upper and lower
+          bound.  The default behavior is to show both the upper and lower
+          bound in /proc/cpuinfo. If the range is large, the temperature is
+          either changing a lot, or the TAU hardware is broken (likely on some
+          G4's). If the range is small (around 4 degrees), the temperature is
+          relatively stable.  If you say Y here, a single temperature value,
+          halfway between the upper and lower bounds, will be reported in
+          /proc/cpuinfo.
+
+          If in doubt, say N here.
+
+endmenu