regulator: TI bq24022 Li-Ion Charger driver

This adds a regulator driver for the TI bq24022 Single-Chip
Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>

4 files changed, 200 insertions, 0 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 84f89ecce69..a656128f1fd 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -46,4 +46,14 @@ config REGULATOR_VIRTUAL_CONSUMER
 
           If unsure, say no.
 
+config REGULATOR_BQ24022
+        tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
+        default n
+        select REGULATOR
+        help
+          This driver controls a TI bq24022 Charger attached via
+          GPIOs. The provided current regulator can enable/disable
+          charging select between 100 mA and 500 mA charging current
+          limit.
+
 endmenu
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 29528b78c8d..ac2c64efe65 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -7,4 +7,6 @@ obj-$(CONFIG_REGULATOR) += core.o
 obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
 
+obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
new file mode 100644
index 00000000000..263699d6152
--- /dev/null
+++ b/drivers/regulator/bq24022.c
@@ -0,0 +1,167 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+
+static int bq24022_set_current_limit(struct regulator_dev *rdev,
+                                        int min_uA, int max_uA)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        dev_dbg(&pdev->dev, "setting current limit to %s mA\n",
+                max_uA >= 500000 ? "500" : "100");
+
+        /* REVISIT: maybe return error if min_uA != 0 ? */
+        gpio_set_value(pdata->gpio_iset2, max_uA >= 500000);
+        return 0;
+}
+
+static int bq24022_get_current_limit(struct regulator_dev *rdev)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000;
+}
+
+static int bq24022_enable(struct regulator_dev *rdev)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        dev_dbg(&pdev->dev, "enabling charger\n");
+
+        gpio_set_value(pdata->gpio_nce, 0);
+        return 0;
+}
+
+static int bq24022_disable(struct regulator_dev *rdev)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        dev_dbg(&pdev->dev, "disabling charger\n");
+
+        gpio_set_value(pdata->gpio_nce, 1);
+        return 0;
+}
+
+static int bq24022_is_enabled(struct regulator_dev *rdev)
+{
+        struct platform_device *pdev = rdev_get_drvdata(rdev);
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+        return !gpio_get_value(pdata->gpio_nce);
+}
+
+static struct regulator_ops bq24022_ops = {
+        .set_current_limit = bq24022_set_current_limit,
+        .get_current_limit = bq24022_get_current_limit,
+        .enable            = bq24022_enable,
+        .disable           = bq24022_disable,
+        .is_enabled        = bq24022_is_enabled,
+};
+
+static struct regulator_desc bq24022_desc = {
+        .name  = "bq24022",
+        .ops   = &bq24022_ops,
+        .type  = REGULATOR_CURRENT,
+};
+
+static int __init bq24022_probe(struct platform_device *pdev)
+{
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+        struct regulator_dev *bq24022;
+        int ret;
+
+        if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2)
+                return -EINVAL;
+
+        ret = gpio_request(pdata->gpio_nce, "ncharge_en");
+        if (ret) {
+                dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n",
+                        pdata->gpio_nce);
+                goto err_ce;
+        }
+        ret = gpio_request(pdata->gpio_iset2, "charge_mode");
+        if (ret) {
+                dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n",
+                        pdata->gpio_iset2);
+                goto err_iset2;
+        }
+        ret = gpio_direction_output(pdata->gpio_iset2, 0);
+        ret = gpio_direction_output(pdata->gpio_nce, 1);
+
+        bq24022 = regulator_register(&bq24022_desc, pdev);
+        if (IS_ERR(bq24022)) {
+                dev_dbg(&pdev->dev, "couldn't register regulator\n");
+                ret = PTR_ERR(bq24022);
+                goto err_reg;
+        }
+        platform_set_drvdata(pdev, bq24022);
+        dev_dbg(&pdev->dev, "registered regulator\n");
+
+        return 0;
+err_reg:
+        gpio_free(pdata->gpio_iset2);
+err_iset2:
+        gpio_free(pdata->gpio_nce);
+err_ce:
+        return ret;
+}
+
+static int __devexit bq24022_remove(struct platform_device *pdev)
+{
+        struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+        struct regulator_dev *bq24022 = platform_get_drvdata(pdev);
+
+        regulator_unregister(bq24022);
+        gpio_free(pdata->gpio_iset2);
+        gpio_free(pdata->gpio_nce);
+
+        return 0;
+}
+
+static struct platform_driver bq24022_driver = {
+        .driver = {
+                .name = "bq24022",
+        },
+        .remove = __devexit_p(bq24022_remove),
+};
+
+static int __init bq24022_init(void)
+{
+        return platform_driver_probe(&bq24022_driver, bq24022_probe);
+}
+
+static void __exit bq24022_exit(void)
+{
+        platform_driver_unregister(&bq24022_driver);
+}
+
+/*
+ * make sure this is probed before gpio_vbus and pda_power,
+ * but after asic3 or other GPIO expander drivers.
+ */
+subsys_initcall(bq24022_init);
+module_exit(bq24022_exit);
+
+MODULE_AUTHOR("Philipp Zabel");
+MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h
new file mode 100644
index 00000000000..e84b0a9feda
--- /dev/null
+++ b/include/linux/regulator/bq24022.h
@@ -0,0 +1,21 @@
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * bq24022_mach_info - platform data for bq24022
+ * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
+ * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA
+ */
+struct bq24022_mach_info {
+        int gpio_nce;
+        int gpio_iset2;
+};