/*
* Copyright 2008 Pavel Machek <pavel@suse.cz>
*
* Distribute under GPLv2.
*/
#include <net/mac80211.h>
#include <linux/usb.h>
#include "core.h"
#include "mds_f.h"
#include "mlmetxrx_f.h"
#include "mto.h"
#include "wbhal_f.h"
#include "wblinux_f.h"
MODULE_AUTHOR("Original by: Jeff Lee<YY_Lee@issc.com.tw> Adapted to 2.6.x by Costantino Leandro (Rxart Desktop) <le_costantino@pixartargentina.com.ar>");
MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");
static struct usb_device_id wb35_table[] __devinitdata = {
{USB_DEVICE(0x0416, 0x0035)},
{USB_DEVICE(0x18E8, 0x6201)},
{USB_DEVICE(0x18E8, 0x6206)},
{USB_DEVICE(0x18E8, 0x6217)},
{USB_DEVICE(0x18E8, 0x6230)},
{USB_DEVICE(0x18E8, 0x6233)},
{USB_DEVICE(0x1131, 0x2035)},
{ 0, }
};
MODULE_DEVICE_TABLE(usb, wb35_table);
static struct ieee80211_rate wbsoft_rates[] = {
{ .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
};
static struct ieee80211_channel wbsoft_channels[] = {
{ .center_freq = 2412},
};
static struct ieee80211_supported_band wbsoft_band_2GHz = {
.channels = wbsoft_channels,
.n_channels = ARRAY_SIZE(wbsoft_channels),
.bitrates = wbsoft_rates,
.n_bitrates = ARRAY_SIZE(wbsoft_rates),
};
static int wbsoft_add_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
{
printk("wbsoft_add interface called\n");
return 0;
}
static void wbsoft_remove_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
{
printk("wbsoft_remove interface called\n");
}
static void wbsoft_stop(struct ieee80211_hw *hw)
{
printk(KERN_INFO "%s called\n", __func__);
}
static int wbsoft_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
printk(KERN_INFO "%s called\n", __func__);
return 0;
}
static int wbsoft_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats)
{
printk(KERN_INFO "%s called\n", __func__);
return 0;
}
static void wbsoft_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
int mc_count, struct dev_mc_list *mclist)
{
unsigned int new_flags;
new_flags = 0;
if (*total_flags & FIF_PROMISC_IN_BSS)
new_flags |= FIF_PROMISC_IN_BSS;
else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32))
new_flags |= FIF_ALLMULTI;
dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
*total_flags = new_flags;
}
static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct wbsoft_priv *priv = dev->priv;
MLMESendFrame(priv, skb->data, skb->len, FRAME_TYPE_802_11_MANAGEMENT);
return NETDEV_TX_OK;
}
static int wbsoft_start(struct ieee80211_hw *dev)
{
struct wbsoft_priv *priv = dev->priv;
priv->enabled = true;
return 0;
}
static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
{
struct wbsoft_priv *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
ChanInfo ch;
printk("wbsoft_config called\n");
ch.band = 1;
ch.ChanNo = 1; /* Should use channel_num, or something, as that is already pre-translated */
hal_set_current_channel(&priv->sHwData, ch);
hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
// hal_set_cap_info(&priv->sHwData, ?? );
// hal_set_ssid(struct hw_data * pHwData, u8 * pssid, u8 ssid_len); ??
hal_set_accept_broadcast(&priv->sHwData, 1);
hal_set_accept_promiscuous(&priv->sHwData, 1);
hal_set_accept_multicast(&priv->sHwData, 1);
hal_set_accept_beacon(&priv->sHwData, 1);
hal_set_radio_mode(&priv->sHwData, 0);
//hal_set_antenna_number( struct hw_data * pHwData, u8 number )
//hal_set_rf_power(struct hw_data * pHwData, u8 PowerIndex)
// hal_start_bss(&priv->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE); ??
//void hal_set_rates(struct hw_data * pHwData, u8 * pbss_rates,
// u8 length, unsigned char basic_rate_set)
return 0;
}
static int wbsoft_config_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf)
{
printk("wbsoft_config_interface called\n");
return 0;
}
static u64 wbsoft_get_tsf(struct ieee80211_hw *dev)
{
printk("wbsoft_get_tsf called\n");
return 0;
}
static const struct ieee80211_ops wbsoft_ops = {
.tx = wbsoft_tx,
.start = wbsoft_start, /* Start can be pretty much empty as we do wb35_hw_init() during probe? */
.stop = wbsoft_stop,
.add_interface = wbsoft_add_interface,
.remove_interface = wbsoft_remove_interface,
.config = wbsoft_config,
.config_interface = wbsoft_config_interface,
.configure_filter = wbsoft_configure_filter,
.get_stats = wbsoft_get_stats,
.get_tx_stats = wbsoft_get_tx_stats,
.get_tsf = wbsoft_get_tsf,
// conf_tx: hal_set_cwmin()/hal_set_cwmax;
};
static void hal_halt(struct hw_data *pHwData, void *ppa_data)
{
switch( pHwData->InitialResource )
{
case 4:
case 3: del_timer_sync(&pHwData->LEDTimer);
msleep(100); // Wait for Timer DPC exit 940623.2
Wb35Rx_destroy( pHwData ); // Release the Rx
case 2: Wb35Tx_destroy( pHwData ); // Release the Tx
case 1: Wb35Reg_destroy( pHwData ); // Release the Wb35 Regisster resources
}
}
static void hal_led_control(unsigned long data)
{
struct wbsoft_priv *adapter = (struct wbsoft_priv *) data;
struct hw_data * pHwData = &adapter->sHwData;
struct wb35_reg *reg = &pHwData->reg;
u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT;
u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 };
u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 };
u32 TimeInterval = 500, ltmp, ltmp2;
ltmp=0;
if( pHwData->SurpriseRemove ) return;
if( pHwData->LED_control ) {
ltmp2 = pHwData->LED_control & 0xff;
if( ltmp2 == 5 ) // 5 is WPS mode
{
TimeInterval = 100;
ltmp2 = (pHwData->LED_control>>8) & 0xff;
switch( ltmp2 )
{
case 1: // [0.2 On][0.1 Off]...
pHwData->LED_Blinking %= 3;
ltmp = 0x1010; // Led 1 & 0 Green and Red
if( pHwData->LED_Blinking == 2 ) // Turn off
ltmp = 0;
break;
case 2: // [0.1 On][0.1 Off]...
pHwData->LED_Blinking %= 2;
ltmp = 0x0010; // Led 0 red color
if( pHwData->LED_Blinking ) // Turn off
ltmp = 0;
break;
case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
pHwData->LED_Blinking %= 15;
ltmp = 0x0010; // Led 0 red color
if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec
ltmp = 0;
break;
case 4: // [300 On][ off ]
ltmp = 0x1000; // Led 1 Green color
if( pHwData->LED_Blinking >= 3000 )
ltmp = 0; // led maybe on after 300sec * 32bit counter overlap.
break;
}
pHwData->LED_Blinking++;
reg->U1BC_LEDConfigure = ltmp;
if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB.
{
reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register
reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8;
}
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
}
else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off
{
if( reg->U1BC_LEDConfigure & 0x1010 )
{
reg->U1BC_LEDConfigure &= ~0x1010;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
}
else
{
switch( LEDSet )
{
case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
if( !pHwData->LED_LinkOn ) // Blink only if not Link On
{
// Blinking if scanning is on progress
if( pHwData->LED_Scanning )
{
if( pHwData->LED_Blinking == 0 )
{
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
}
else
{
//Turn Off LED_0
if( reg->U1BC_LEDConfigure & 0x10 )
{
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
}
}
}
else
{
// Turn On LED_0
if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
{
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
}
}
break;
case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
if( !pHwData->LED_LinkOn ) // Blink only if not Link On
{
// Blinking if scanning is on progress
if( pHwData->LED_Scanning )
{
if( pHwData->LED_Blinking == 0 )
{
reg->U1BC_LEDConfigure &= ~0xf;
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
reg->U1BC_LEDConfigure &= ~0x1f;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
}
else
{
// 20060901 Gray blinking if in disconnect state and not scanning
ltmp = reg->U1BC_LEDConfigure;
reg->U1BC_LEDConfigure &= ~0x1f;
if( LEDgray2[(pHwData->LED_Blinking%30)] )
{
reg->U1BC_LEDConfigure |= 0x10;
reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ];
}
pHwData->LED_Blinking++;
if( reg->U1BC_LEDConfigure != ltmp )
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
TimeInterval = 100;
}
}
else
{
// Turn On LED_0
if( (reg->U1BC_LEDConfigure & 0x10) == 0 )
{
reg->U1BC_LEDConfigure |= 0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off
}
}
break;
case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
if( !pHwData->LED_LinkOn ) // Blink only if not Link On
{
// Blinking if scanning is on progress
if( pHwData->LED_Scanning )
{
if( pHwData->LED_Blinking == 0 )
{
reg->U1BC_LEDConfigure |= 0x1000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
pHwData->LED_Blinking = 1;
TimeInterval = 300;
}
else
{
reg->U1BC_LEDConfigure &= ~0x1000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
pHwData->LED_Blinking = 0;
TimeInterval = 300;
}
}
else
{
//Turn Off LED_1
if( reg->U1BC_LEDConfigure & 0x1000 )
{
reg->U1BC_LEDConfigure &= ~0x1000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off
}
}
}
else
{
// Is transmitting/receiving ??
if( (adapter->RxByteCount != pHwData->RxByteCountLast ) ||
(adapter->TxByteCount != pHwData->TxByteCountLast ) )
{
if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
{
reg->U1BC_LEDConfigure |= 0x3000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
}
// Update variable
pHwData->RxByteCountLast = adapter->RxByteCount;
pHwData->TxByteCountLast = adapter->TxByteCount;
TimeInterval = 200;
}
else
{
// Turn On LED_1 and blinking if transmitting/receiving
if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 )
{
reg->U1BC_LEDConfigure &= ~0x3000;
reg->U1BC_LEDConfigure |= 0x1000;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On
}
}
}
break;
default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 )
{
reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
if( pHwData->LED_Blinking )
{
// Gray blinking
reg->U1BC_LEDConfigure &= ~0x0f;
reg->U1BC_LEDConfigure |= 0x10;
reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ];
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
pHwData->LED_Blinking += 2;
if( pHwData->LED_Blinking < 40 )
TimeInterval = 100;
else
{
pHwData->LED_Blinking = 0; // Stop blinking
reg->U1BC_LEDConfigure &= ~0x0f;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
break;
}
if( pHwData->LED_LinkOn )
{
if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0
{
//Try to turn ON LED_0 after gray blinking
reg->U1BC_LEDConfigure |= 0x10;
pHwData->LED_Blinking = 1; //Start blinking
TimeInterval = 50;
}
}
else
{
if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0
{
reg->U1BC_LEDConfigure &= ~0x10;
Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure );
}
}
break;
}
//20060828.1 Active send null packet to avoid AP disconnect
if( pHwData->LED_LinkOn )
{
pHwData->NullPacketCount += TimeInterval;
if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT )
{
pHwData->NullPacketCount = 0;
}
}
}
pHwData->time_count += TimeInterval;
Wb35Tx_CurrentTime(adapter, pHwData->time_count); // 20060928 add
pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
add_timer(&pHwData->LEDTimer);
}
static int hal_init_hardware(struct ieee80211_hw *hw)
{
struct wbsoft_priv *priv = hw->priv;
struct hw_data * pHwData = &priv->sHwData;
u16 SoftwareSet;
// Initial the variable
pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME; // Setting Rx maximum MSDU life time
pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; // Setting default fragment threshold
pHwData->InitialResource = 1;
if (!Wb35Reg_initial(pHwData))
goto error;
pHwData->InitialResource = 2;
if (!Wb35Tx_initial(pHwData))
goto error;
pHwData->InitialResource = 3;
if (!Wb35Rx_initial(pHwData))
goto error;
pHwData->InitialResource = 4;
init_timer(&pHwData->LEDTimer);
pHwData->LEDTimer.function = hal_led_control;
pHwData->LEDTimer.data = (unsigned long) priv;
pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000);
add_timer(&pHwData->LEDTimer);
//
// For restrict to vendor's hardware
//
SoftwareSet = hal_software_set( pHwData );
#ifdef Vendor2
// Try to make sure the EEPROM contain
SoftwareSet >>= 8;
if( SoftwareSet != 0x82 )
return false;
#endif
Wb35Rx_start(hw);
Wb35Tx_EP2VM_start(priv);
return 0;
error:
pHwData->SurpriseRemove = 1;
return -EINVAL;
}
static int wb35_hw_init(struct ieee80211_hw *hw)
{
struct wbsoft_priv *priv = hw->priv;
struct hw_data * pHwData;
u8 *pMacAddr;
u8 *pMacAddr2;
u8 EEPROM_region;
u8 HwRadioOff;
int err;
//
// Setting default value for Linux
//
priv->sLocalPara.region_INF = REGION_AUTO;
priv->sLocalPara.TxRateMode = RATE_AUTO;
priv->sLocalPara.bMacOperationMode = MODE_802_11_BG; // B/G mode
priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
hal_set_phy_type( &priv->sHwData, RF_WB_242_1 );
priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
priv->sLocalPara.bPreambleMode = AUTO_MODE;
priv->sLocalPara.RadioOffStatus.boSwRadioOff = false;
pHwData = &priv->sHwData;
hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
//added by ws for wep key error detection
priv->sLocalPara.bWepKeyError= false;
priv->sLocalPara.bToSelfPacketReceived = false;
priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
// Initial USB hal
pHwData = &priv->sHwData;
err = hal_init_hardware(hw);
if (err)
goto error;
EEPROM_region = hal_get_region_from_EEPROM( pHwData );
if (EEPROM_region != REGION_AUTO)
priv->sLocalPara.region = EEPROM_region;
else {
if (priv->sLocalPara.region_INF != REGION_AUTO)
priv->sLocalPara.region = priv->sLocalPara.region_INF;
else
priv->sLocalPara.region = REGION_USA; //default setting
}
// Get Software setting flag from hal
priv->sLocalPara.boAntennaDiversity = false;
if (hal_software_set(pHwData) & 0x00000001)
priv->sLocalPara.boAntennaDiversity = true;
// For MDS module
Mds_initial(priv);
//=======================================
// Initialize the SME, SCAN, MLME, ROAM
//=======================================
// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
pMacAddr = priv->sLocalPara.ThisMacAddress;
pMacAddr2 = priv->sLocalPara.PermanentAddress;
hal_get_permanent_address( pHwData, priv->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0)
memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH);
else {
// Set the user define MAC address
hal_set_ethernet_address(pHwData, priv->sLocalPara.ThisMacAddress);
}
//get current antenna
priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData);
#ifdef _PE_STATE_DUMP_
printk("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo);
#endif
hal_get_hw_radio_off( pHwData );
// Waiting for HAL setting OK
while (!hal_idle(pHwData))
msleep(10);
MTO_Init(priv);
HwRadioOff = hal_get_hw_radio_off( pHwData );
priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff;
hal_set_radio_mode( pHwData, (unsigned char)(priv->sLocalPara.RadioOffStatus.boSwRadioOff || priv->sLocalPara.RadioOffStatus.boHwRadioOff) );
hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
//set a tx power for reference.....
// sme_set_tx_power_level(priv, 12); FIXME?
return 0;
error:
hal_halt(pHwData, NULL);
return err;
}
static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
{
struct wb_usb *pWbUsb;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
u32 ltmp;
struct usb_device *udev = interface_to_usbdev(intf);
struct wbsoft_priv *priv;
struct ieee80211_hw *dev;
int nr, err;
usb_get_dev(udev);
// 20060630.2 Check the device if it already be opened
nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
0x0, 0x400, <mp, 4, HZ*100 );
if (nr < 0) {
err = nr;
goto error;
}
ltmp = cpu_to_le32(ltmp);
if (ltmp) { // Is already initialized?
err = -EBUSY;
goto error;
}
dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
if (!dev) {
err = -ENOMEM;
goto error;
}
priv = dev->priv;
spin_lock_init(&priv->SpinLock);
pWbUsb = &priv->sHwData.WbUsb;
pWbUsb->udev = udev;
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
if (endpoint[2].wMaxPacketSize == 512) {
printk("[w35und] Working on USB 2.0\n");
pWbUsb->IsUsb20 = 1;
}
err = wb35_hw_init(dev);
if (err)
goto error_free_hw;
SET_IEEE80211_DEV(dev, &udev->dev);
{
struct hw_data * pHwData = &priv->sHwData;
unsigned char dev_addr[MAX_ADDR_LEN];
hal_get_permanent_address(pHwData, dev_addr);
SET_IEEE80211_PERM_ADDR(dev, dev_addr);
}
dev->extra_tx_headroom = 12; /* FIXME */
dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
dev->channel_change_time = 1000;
dev->max_signal = 100;
dev->queues = 1;
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;
err = ieee80211_register_hw(dev);
if (err)
goto error_free_hw;
usb_set_intfdata(intf, dev);
return 0;
error_free_hw:
ieee80211_free_hw(dev);
error:
usb_put_dev(udev);
return err;
}
static void wb35_hw_halt(struct wbsoft_priv *adapter)
{
Mds_Destroy( adapter );
// Turn off Rx and Tx hardware ability
hal_stop( &adapter->sHwData );
#ifdef _PE_USB_INI_DUMP_
printk("[w35und] Hal_stop O.K.\n");
#endif
msleep(100);// Waiting Irp completed
// Halt the HAL
hal_halt(&adapter->sHwData, NULL);
}
static void wb35_disconnect(struct usb_interface *intf)
{
struct ieee80211_hw *hw = usb_get_intfdata(intf);
struct wbsoft_priv *priv = hw->priv;
wb35_hw_halt(priv);
ieee80211_stop_queues(hw);
ieee80211_unregister_hw(hw);
ieee80211_free_hw(hw);
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
}
static struct usb_driver wb35_driver = {
.name = "w35und",
.id_table = wb35_table,
.probe = wb35_probe,
.disconnect = wb35_disconnect,
};
static int __init wb35_init(void)
{
return usb_register(&wb35_driver);
}
static void __exit wb35_exit(void)
{
usb_deregister(&wb35_driver);
}
module_init(wb35_init);
module_exit(wb35_exit);