/*
* Agere Systems Inc.
* 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
*
* Copyright © 2005 Agere Systems Inc.
* All rights reserved.
* http://www.agere.com
*
*------------------------------------------------------------------------------
*
* et1310_jagcore.c - All code pertaining to the ET1301/ET131x's JAGcore
*
*------------------------------------------------------------------------------
*
* SOFTWARE LICENSE
*
* This software is provided subject to the following terms and conditions,
* which you should read carefully before using the software. Using this
* software indicates your acceptance of these terms and conditions. If you do
* not agree with these terms and conditions, do not use the software.
*
* Copyright © 2005 Agere Systems Inc.
* All rights reserved.
*
* Redistribution and use in source or binary forms, with or without
* modifications, are permitted provided that the following conditions are met:
*
* . Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following Disclaimer as comments in the code as
* well as in the documentation and/or other materials provided with the
* distribution.
*
* . Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following Disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* . Neither the name of Agere Systems Inc. nor the names of the contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Disclaimer
*
* THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*/
#include "et131x_version.h"
#include "et131x_debug.h"
#include "et131x_defs.h"
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/bitops.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include "et1310_phy.h"
#include "et1310_pm.h"
#include "et1310_jagcore.h"
#include "et131x_adapter.h"
#include "et131x_initpci.h"
/* Data for debugging facilities */
#ifdef CONFIG_ET131X_DEBUG
extern dbg_info_t *et131x_dbginfo;
#endif /* CONFIG_ET131X_DEBUG */
/**
* ConfigGlobalRegs - Used to configure the global registers on the JAGCore
* @pAdpater: pointer to our adapter structure
*/
void ConfigGlobalRegs(struct et131x_adapter *pAdapter)
{
struct _GLOBAL_t __iomem *pGbl = &pAdapter->CSRAddress->global;
DBG_ENTER(et131x_dbginfo);
if (pAdapter->RegistryPhyLoopbk == false) {
if (pAdapter->RegistryJumboPacket < 2048) {
/* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word
* block of RAM that the driver can split between Tx
* and Rx as it desires. Our default is to split it
* 50/50:
*/
writel(0, &pGbl->rxq_start_addr.value);
writel(pAdapter->RegistryRxMemEnd,
&pGbl->rxq_end_addr.value);
writel(pAdapter->RegistryRxMemEnd + 1,
&pGbl->txq_start_addr.value);
writel(INTERNAL_MEM_SIZE - 1,
&pGbl->txq_end_addr.value);
} else if (pAdapter->RegistryJumboPacket < 8192) {
/* For jumbo packets > 2k but < 8k, split 50-50. */
writel(0, &pGbl->rxq_start_addr.value);
writel(INTERNAL_MEM_RX_OFFSET,
&pGbl->rxq_end_addr.value);
writel(INTERNAL_MEM_RX_OFFSET + 1,
&pGbl->txq_start_addr.value);
writel(INTERNAL_MEM_SIZE - 1,
&pGbl->txq_end_addr.value);
} else {
/* 9216 is the only packet size greater than 8k that
* is available. The Tx buffer has to be big enough
* for one whole packet on the Tx side. We'll make
* the Tx 9408, and give the rest to Rx
*/
writel(0x0000, &pGbl->rxq_start_addr.value);
writel(0x01b3, &pGbl->rxq_end_addr.value);
writel(0x01b4, &pGbl->txq_start_addr.value);
writel(INTERNAL_MEM_SIZE - 1,
&pGbl->txq_end_addr.value);
}
/* Initialize the loopback register. Disable all loopbacks. */
writel(0, &pGbl->loopback.value);
} else {
/* For PHY Line loopback, the memory is configured as if Tx
* and Rx both have all the memory. This is because the
* RxMAC will write data into the space, and the TxMAC will
* read it out.
*/
writel(0, &pGbl->rxq_start_addr.value);
writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr.value);
writel(0, &pGbl->txq_start_addr.value);
writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr.value);
/* Initialize the loopback register (MAC loopback). */
writel(1, &pGbl->loopback.value);
}
/* MSI Register */
writel(0, &pGbl->msi_config.value);
/* By default, disable the watchdog timer. It will be enabled when
* a packet is queued.
*/
writel(0, &pGbl->watchdog_timer);
DBG_LEAVE(et131x_dbginfo);
}
/**
* ConfigMMCRegs - Used to configure the main memory registers in the JAGCore
* @pAdapter: pointer to our adapter structure
*/
void ConfigMMCRegs(struct et131x_adapter *pAdapter)
{
MMC_CTRL_t mmc_ctrl = { 0 };
DBG_ENTER(et131x_dbginfo);
/* All we need to do is initialize the Memory Control Register */
mmc_ctrl.bits.force_ce = 0x0;
mmc_ctrl.bits.rxdma_disable = 0x0;
mmc_ctrl.bits.txdma_disable = 0x0;
mmc_ctrl.bits.txmac_disable = 0x0;
mmc_ctrl.bits.rxmac_disable = 0x0;
mmc_ctrl.bits.arb_disable = 0x0;
mmc_ctrl.bits.mmc_enable = 0x1;
writel(mmc_ctrl.value, &pAdapter->CSRAddress->mmc.mmc_ctrl.value);
DBG_LEAVE(et131x_dbginfo);
}
void et131x_enable_interrupts(struct et131x_adapter *adapter)
{
uint32_t MaskValue;
/* Enable all global interrupts */
if ((adapter->FlowControl == TxOnly) || (adapter->FlowControl == Both)) {
MaskValue = INT_MASK_ENABLE;
} else {
MaskValue = INT_MASK_ENABLE_NO_FLOW;
}
if (adapter->DriverNoPhyAccess) {
MaskValue |= 0x10000;
}
adapter->CachedMaskValue.value = MaskValue;
writel(MaskValue, &adapter->CSRAddress->global.int_mask.value);
}
void et131x_disable_interrupts(struct et131x_adapter * adapter)
{
/* Disable all global interrupts */
adapter->CachedMaskValue.value = INT_MASK_DISABLE;
writel(INT_MASK_DISABLE, &adapter->CSRAddress->global.int_mask.value);
}
