aboutsummaryrefslogblamecommitdiffstats
path: root/drivers/char/esp.c
blob: 922174d527ae6325ed63562e1929f44892a9ded7 (plain) (tree)
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282























































































































































                                                                           






















































































































































































                                                                               
                                     

                                                      
                                                 



                                                            
                                                 
                                                         

                                                                          


                 
                               































                                                                            









                                                     
                            
                                                                       

                                                          



                                                                              
 













                                                                                       
                 
                                       




























































































































































































































































                                                                              
                                                                          





























































































































































































































































































































































































































































































































































                                                                              
                            










































                                                                        
                            






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































                                                                                  
                                                   



































































































































































































                                                                                                
                                    



































                                                                          








































































                                                                                                         








                                             
/*
 *  esp.c - driver for Hayes ESP serial cards
 *
 *  --- Notices from serial.c, upon which this driver is based ---
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 *
 *  Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92.  Now
 *  much more extensible to support other serial cards based on the
 *  16450/16550A UART's.  Added support for the AST FourPort and the
 *  Accent Async board.  
 *
 *  set_serial_info fixed to set the flags, custom divisor, and uart
 * 	type fields.  Fix suggested by Michael K. Johnson 12/12/92.
 *
 *  11/95: TIOCMIWAIT, TIOCGICOUNT by Angelo Haritsis <ah@doc.ic.ac.uk>
 *
 *  03/96: Modularised by Angelo Haritsis <ah@doc.ic.ac.uk>
 *
 *  rs_set_termios fixed to look also for changes of the input
 *      flags INPCK, BRKINT, PARMRK, IGNPAR and IGNBRK.
 *                                            Bernd Anh�pl 05/17/96.
 *
 * --- End of notices from serial.c ---
 *
 * Support for the ESP serial card by Andrew J. Robinson
 *     <arobinso@nyx.net> (Card detection routine taken from a patch
 *     by Dennis J. Boylan).  Patches to allow use with 2.1.x contributed
 *     by Chris Faylor.
 *
 * Most recent changes: (Andrew J. Robinson)
 *   Support for PIO mode.  This allows the driver to work properly with
 *     multiport cards.
 *
 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> -
 * several cleanups, use module_init/module_exit, etc
 *
 * This module exports the following rs232 io functions:
 *
 *	int espserial_init(void);
 */

#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>

#include <asm/system.h>
#include <asm/io.h>
#include <asm/bitops.h>

#include <asm/dma.h>
#include <linux/slab.h>
#include <asm/uaccess.h>

#include <linux/hayesesp.h>

#define NR_PORTS 64	/* maximum number of ports */
#define NR_PRIMARY 8	/* maximum number of primary ports */
#define REGION_SIZE 8   /* size of io region to request */

/* The following variables can be set by giving module options */
static int irq[NR_PRIMARY];	/* IRQ for each base port */
static unsigned int divisor[NR_PRIMARY]; /* custom divisor for each port */
static unsigned int dma = ESP_DMA_CHANNEL; /* DMA channel */
static unsigned int rx_trigger = ESP_RX_TRIGGER;
static unsigned int tx_trigger = ESP_TX_TRIGGER;
static unsigned int flow_off = ESP_FLOW_OFF;
static unsigned int flow_on = ESP_FLOW_ON;
static unsigned int rx_timeout = ESP_RX_TMOUT;
static unsigned int pio_threshold = ESP_PIO_THRESHOLD;

MODULE_LICENSE("GPL");

module_param_array(irq, int, NULL, 0);
module_param_array(divisor, uint, NULL, 0);
module_param(dma, uint, 0);
module_param(rx_trigger, uint, 0);
module_param(tx_trigger, uint, 0);
module_param(flow_off, uint, 0);
module_param(flow_on, uint, 0);
module_param(rx_timeout, uint, 0);
module_param(pio_threshold, uint, 0);

/* END */

static char *dma_buffer;
static int dma_bytes;
static struct esp_pio_buffer *free_pio_buf;

#define DMA_BUFFER_SZ 1024

#define WAKEUP_CHARS 1024

static char serial_name[] __initdata = "ESP serial driver";
static char serial_version[] __initdata = "2.2";

static struct tty_driver *esp_driver;

/* serial subtype definitions */
#define SERIAL_TYPE_NORMAL	1

/*
 * Serial driver configuration section.  Here are the various options:
 *
 * SERIAL_PARANOIA_CHECK
 * 		Check the magic number for the esp_structure where
 * 		ever possible.
 */

#undef SERIAL_PARANOIA_CHECK
#define SERIAL_DO_RESTART

#undef SERIAL_DEBUG_INTR
#undef SERIAL_DEBUG_OPEN
#undef SERIAL_DEBUG_FLOW

#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
 tty->name, (info->flags), serial_driver.refcount,info->count,tty->count,s)
#else
#define DBG_CNT(s)
#endif

static struct esp_struct *ports;

static void change_speed(struct esp_struct *info);
static void rs_wait_until_sent(struct tty_struct *, int);

/*
 * The ESP card has a clock rate of 14.7456 MHz (that is, 2**ESPC_SCALE
 * times the normal 1.8432 Mhz clock of most serial boards).
 */
#define BASE_BAUD ((1843200 / 16) * (1 << ESPC_SCALE))

/* Standard COM flags (except for COM4, because of the 8514 problem) */
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)

static inline int serial_paranoia_check(struct esp_struct *info,
					char *name, const char *routine)
{
#ifdef SERIAL_PARANOIA_CHECK
	static const char badmagic[] = KERN_WARNING
		"Warning: bad magic number for serial struct (%s) in %s\n";
	static const char badinfo[] = KERN_WARNING
		"Warning: null esp_struct for (%s) in %s\n";

	if (!info) {
		printk(badinfo, name, routine);
		return 1;
	}
	if (info->magic != ESP_MAGIC) {
		printk(badmagic, name, routine);
		return 1;
	}
#endif
	return 0;
}

static inline unsigned int serial_in(struct esp_struct *info, int offset)
{
	return inb(info->port + offset);
}

static inline void serial_out(struct esp_struct *info, int offset,
			      unsigned char value)
{
	outb(value, info->port+offset);
}

/*
 * ------------------------------------------------------------
 * rs_stop() and rs_start()
 *
 * This routines are called before setting or resetting tty->stopped.
 * They enable or disable transmitter interrupts, as necessary.
 * ------------------------------------------------------------
 */
static void rs_stop(struct tty_struct *tty)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;

	if (serial_paranoia_check(info, tty->name, "rs_stop"))
		return;

	spin_lock_irqsave(&info->lock, flags);
	if (info->IER & UART_IER_THRI) {
		info->IER &= ~UART_IER_THRI;
		serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
		serial_out(info, UART_ESI_CMD2, info->IER);
	}
	spin_unlock_irqrestore(&info->lock, flags);
}

static void rs_start(struct tty_struct *tty)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;
	
	if (serial_paranoia_check(info, tty->name, "rs_start"))
		return;
	
	spin_lock_irqsave(&info->lock, flags);
	if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) {
		info->IER |= UART_IER_THRI;
		serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
		serial_out(info, UART_ESI_CMD2, info->IER);
	}
	spin_unlock_irqrestore(&info->lock, flags);
}

/*
 * ----------------------------------------------------------------------
 *
 * Here starts the interrupt handling routines.  All of the following
 * subroutines are declared as inline and are folded into
 * rs_interrupt().  They were separated out for readability's sake.
 *
 * Note: rs_interrupt() is a "fast" interrupt, which means that it
 * runs with interrupts turned off.  People who may want to modify
 * rs_interrupt() should try to keep the interrupt handler as fast as
 * possible.  After you are done making modifications, it is not a bad
 * idea to do:
 * 
 * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
 *
 * and look at the resulting assemble code in serial.s.
 *
 * 				- Ted Ts'o (tytso@mit.edu), 7-Mar-93
 * -----------------------------------------------------------------------
 */

/*
 * This routine is used by the interrupt handler to schedule
 * processing in the software interrupt portion of the driver.
 */
static inline void rs_sched_event(struct esp_struct *info,
				  int event)
{
	info->event |= 1 << event;
	schedule_work(&info->tqueue);
}

static DEFINE_SPINLOCK(pio_lock);

static inline struct esp_pio_buffer *get_pio_buffer(void)
{
	struct esp_pio_buffer *buf;
	unsigned long flags;

	spin_lock_irqsave(&pio_lock, flags);
	if (free_pio_buf) {
		buf = free_pio_buf;
		free_pio_buf = buf->next;
	} else {
		buf = kmalloc(sizeof(struct esp_pio_buffer), GFP_ATOMIC);
	}
	spin_unlock_irqrestore(&pio_lock, flags);
	return buf;
}

static inline void release_pio_buffer(struct esp_pio_buffer *buf)
{
	unsigned long flags;
	spin_lock_irqsave(&pio_lock, flags);
	buf->next = free_pio_buf;
	free_pio_buf = buf;
	spin_unlock_irqrestore(&pio_lock, flags);
}

static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
{
	struct tty_struct *tty = info->tty;
	int i;
	struct esp_pio_buffer *pio_buf;
	struct esp_pio_buffer *err_buf;
	unsigned char status_mask;

	pio_buf = get_pio_buffer();

	if (!pio_buf)
		return;

	err_buf = get_pio_buffer();

	if (!err_buf) {
		release_pio_buffer(pio_buf);
		return;
	}

	status_mask = (info->read_status_mask >> 2) & 0x07;
		
	for (i = 0; i < num_bytes - 1; i += 2) {
		*((unsigned short *)(pio_buf->data + i)) =
			inw(info->port + UART_ESI_RX);
		err_buf->data[i] = serial_in(info, UART_ESI_RWS);
		err_buf->data[i + 1] = (err_buf->data[i] >> 3) & status_mask;
		err_buf->data[i] &= status_mask;
	}

	if (num_bytes & 0x0001) {
		pio_buf->data[num_bytes - 1] = serial_in(info, UART_ESI_RX);
		err_buf->data[num_bytes - 1] =
			(serial_in(info, UART_ESI_RWS) >> 3) & status_mask;
	}

	/* make sure everything is still ok since interrupts were enabled */
	tty = info->tty;

	if (!tty) {
		release_pio_buffer(pio_buf);
		release_pio_buffer(err_buf);
		info->stat_flags &= ~ESP_STAT_RX_TIMEOUT;
		return;
	}

	status_mask = (info->ignore_status_mask >> 2) & 0x07;

	for (i = 0; i < num_bytes; i++) {
		if (!(err_buf->data[i] & status_mask)) {
			int flag = 0;

			if (err_buf->data[i] & 0x04) {
				flag = TTY_BREAK;
				if (info->flags & ASYNC_SAK)
					do_SAK(tty);
			}
			else if (err_buf->data[i] & 0x02)
				flag = TTY_FRAME;
			else if (err_buf->data[i] & 0x01)
				flag = TTY_PARITY;
			tty_insert_flip_char(tty, pio_buf->data[i], flag);
		}
	}

	tty_schedule_flip(tty);

	info->stat_flags &= ~ESP_STAT_RX_TIMEOUT;
	release_pio_buffer(pio_buf);
	release_pio_buffer(err_buf);
}

static inline void receive_chars_dma(struct esp_struct *info, int num_bytes)
{
	unsigned long flags;
	info->stat_flags &= ~ESP_STAT_RX_TIMEOUT;
	dma_bytes = num_bytes;
	info->stat_flags |= ESP_STAT_DMA_RX;
	
	flags=claim_dma_lock();
        disable_dma(dma);
        clear_dma_ff(dma);
        set_dma_mode(dma, DMA_MODE_READ);
        set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
        set_dma_count(dma, dma_bytes);
        enable_dma(dma);
        release_dma_lock(flags);
        
        serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX);
}

static inline void receive_chars_dma_done(struct esp_struct *info,
					    int status)
{
	struct tty_struct *tty = info->tty;
	int num_bytes;
	unsigned long flags;
	
	flags=claim_dma_lock();
	disable_dma(dma);
	clear_dma_ff(dma);

	info->stat_flags &= ~ESP_STAT_DMA_RX;
	num_bytes = dma_bytes - get_dma_residue(dma);
	release_dma_lock(flags);
	
	info->icount.rx += num_bytes;

	if (num_bytes > 0) {
		tty_insert_flip_string(tty, dma_buffer, num_bytes - 1);

		status &= (0x1c & info->read_status_mask);
		
		/* Is the status significant or do we throw the last byte ? */
		if (!(status & info->ignore_status_mask)) {
			int statflag = 0;

			if (status & 0x10) {
				statflag = TTY_BREAK;
				(info->icount.brk)++;
				if (info->flags & ASYNC_SAK)
					do_SAK(tty);
			} else if (status & 0x08) {
				statflag = TTY_FRAME;
				(info->icount.frame)++;
			}
			else if (status & 0x04) {
				statflag = TTY_PARITY;
				(info->icount.parity)++;
			}
			tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], statflag);
		}
		tty_schedule_flip(tty);
	}

	if (dma_bytes != num_bytes) {
		num_bytes = dma_bytes - num_bytes;
		dma_bytes = 0;
		receive_chars_dma(info, num_bytes);
	} else
		dma_bytes = 0;
}

/* Caller must hold info->lock */

static inline void transmit_chars_pio(struct esp_struct *info,
					int space_avail)
{
	int i;
	struct esp_pio_buffer *pio_buf;

	pio_buf = get_pio_buffer();

	if (!pio_buf)
		return;

	while (space_avail && info->xmit_cnt) {
		if (info->xmit_tail + space_avail <= ESP_XMIT_SIZE) {
			memcpy(pio_buf->data,
			       &(info->xmit_buf[info->xmit_tail]),
			       space_avail);
		} else {
			i = ESP_XMIT_SIZE - info->xmit_tail;
			memcpy(pio_buf->data,
			       &(info->xmit_buf[info->xmit_tail]), i);
			memcpy(&(pio_buf->data[i]), info->xmit_buf,
			       space_avail - i);
		}

		info->xmit_cnt -= space_avail;
		info->xmit_tail = (info->xmit_tail + space_avail) &
			(ESP_XMIT_SIZE - 1);

		for (i = 0; i < space_avail - 1; i += 2) {
			outw(*((unsigned short *)(pio_buf->data + i)),
			     info->port + UART_ESI_TX);
		}

		if (space_avail & 0x0001)
			serial_out(info, UART_ESI_TX,
				   pio_buf->data[space_avail - 1]);

		if (info->xmit_cnt) {
			serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND);
			serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL);
			space_avail = serial_in(info, UART_ESI_STAT1) << 8;
			space_avail |= serial_in(info, UART_ESI_STAT2);

			if (space_avail > info->xmit_cnt)
				space_avail = info->xmit_cnt;
		}
	}

	if (info->xmit_cnt < WAKEUP_CHARS) {
		rs_sched_event(info, ESP_EVENT_WRITE_WAKEUP);

#ifdef SERIAL_DEBUG_INTR
		printk("THRE...");
#endif

		if (info->xmit_cnt <= 0) {
			info->IER &= ~UART_IER_THRI;
			serial_out(info, UART_ESI_CMD1,
				   ESI_SET_SRV_MASK);
			serial_out(info, UART_ESI_CMD2, info->IER);
		}
	}

	release_pio_buffer(pio_buf);
}

/* Caller must hold info->lock */
static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes)
{
	unsigned long flags;
	
	dma_bytes = num_bytes;

	if (info->xmit_tail + dma_bytes <= ESP_XMIT_SIZE) {
		memcpy(dma_buffer, &(info->xmit_buf[info->xmit_tail]),
		       dma_bytes);
	} else {
		int i = ESP_XMIT_SIZE - info->xmit_tail;
		memcpy(dma_buffer, &(info->xmit_buf[info->xmit_tail]),
			i);
		memcpy(&(dma_buffer[i]), info->xmit_buf, dma_bytes - i);
	}

	info->xmit_cnt -= dma_bytes;
	info->xmit_tail = (info->xmit_tail + dma_bytes) & (ESP_XMIT_SIZE - 1);

	if (info->xmit_cnt < WAKEUP_CHARS) {
		rs_sched_event(info, ESP_EVENT_WRITE_WAKEUP);

#ifdef SERIAL_DEBUG_INTR
		printk("THRE...");
#endif

		if (info->xmit_cnt <= 0) {
			info->IER &= ~UART_IER_THRI;
			serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
			serial_out(info, UART_ESI_CMD2, info->IER);
		}
	}

	info->stat_flags |= ESP_STAT_DMA_TX;
	
	flags=claim_dma_lock();
        disable_dma(dma);
        clear_dma_ff(dma);
        set_dma_mode(dma, DMA_MODE_WRITE);
        set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
        set_dma_count(dma, dma_bytes);
        enable_dma(dma);
        release_dma_lock(flags);
        
        serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
}

static inline void transmit_chars_dma_done(struct esp_struct *info)
{
	int num_bytes;
	unsigned long flags;
	

	flags=claim_dma_lock();
	disable_dma(dma);
	clear_dma_ff(dma);

	num_bytes = dma_bytes - get_dma_residue(dma);
	info->icount.tx += dma_bytes;
	release_dma_lock(flags);

	if (dma_bytes != num_bytes) {
		dma_bytes -= num_bytes;
		memmove(dma_buffer, dma_buffer + num_bytes, dma_bytes);
		
		flags=claim_dma_lock();
        	disable_dma(dma);
        	clear_dma_ff(dma);
        	set_dma_mode(dma, DMA_MODE_WRITE);
        	set_dma_addr(dma, isa_virt_to_bus(dma_buffer));
        	set_dma_count(dma, dma_bytes);
        	enable_dma(dma);
        	release_dma_lock(flags);
        	
        	serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX);
	} else {
		dma_bytes = 0;
		info->stat_flags &= ~ESP_STAT_DMA_TX;
	}
}

static inline void check_modem_status(struct esp_struct *info)
{
	int	status;
	
	serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT);
	status = serial_in(info, UART_ESI_STAT2);

	if (status & UART_MSR_ANY_DELTA) {
		/* update input line counters */
		if (status & UART_MSR_TERI)
			info->icount.rng++;
		if (status & UART_MSR_DDSR)
			info->icount.dsr++;
		if (status & UART_MSR_DDCD)
			info->icount.dcd++;
		if (status & UART_MSR_DCTS)
			info->icount.cts++;
		wake_up_interruptible(&info->delta_msr_wait);
	}

	if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
		printk("ttys%d CD now %s...", info->line,
		       (status & UART_MSR_DCD) ? "on" : "off");
#endif		
		if (status & UART_MSR_DCD)
			wake_up_interruptible(&info->open_wait);
		else {
#ifdef SERIAL_DEBUG_OPEN
			printk("scheduling hangup...");
#endif
			schedule_work(&info->tqueue_hangup);
		}
	}
}

/*
 * This is the serial driver's interrupt routine
 */
static irqreturn_t rs_interrupt_single(int irq, void *dev_id,
					struct pt_regs *regs)
{
	struct esp_struct * info;
	unsigned err_status;
	unsigned int scratch;

#ifdef SERIAL_DEBUG_INTR
	printk("rs_interrupt_single(%d)...", irq);
#endif
	info = (struct esp_struct *)dev_id;
	err_status = 0;
	scratch = serial_in(info, UART_ESI_SID);

	spin_lock(&info->lock);
	
	if (!info->tty) {
		spin_unlock(&info->lock);
		return IRQ_NONE;
	}

	if (scratch & 0x04) { /* error */
		serial_out(info, UART_ESI_CMD1, ESI_GET_ERR_STAT);
		err_status = serial_in(info, UART_ESI_STAT1);
		serial_in(info, UART_ESI_STAT2);

		if (err_status & 0x01)
			info->stat_flags |= ESP_STAT_RX_TIMEOUT;

		if (err_status & 0x20) /* UART status */
			check_modem_status(info);

		if (err_status & 0x80) /* Start break */
			wake_up_interruptible(&info->break_wait);
	}
		
	if ((scratch & 0x88) || /* DMA completed or timed out */
	    (err_status & 0x1c) /* receive error */) {
		if (info->stat_flags & ESP_STAT_DMA_RX)
			receive_chars_dma_done(info, err_status);
		else if (info->stat_flags & ESP_STAT_DMA_TX)
			transmit_chars_dma_done(info);
	}

	if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) &&
	    ((scratch & 0x01) || (info->stat_flags & ESP_STAT_RX_TIMEOUT)) &&
	    (info->IER & UART_IER_RDI)) {
		int num_bytes;

		serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND);
		serial_out(info, UART_ESI_CMD1, ESI_GET_RX_AVAIL);
		num_bytes = serial_in(info, UART_ESI_STAT1) << 8;
		num_bytes |= serial_in(info, UART_ESI_STAT2);

		num_bytes = tty_buffer_request_room(info->tty, num_bytes);

		if (num_bytes) {
			if (dma_bytes ||
			    (info->stat_flags & ESP_STAT_USE_PIO) ||
			    (num_bytes <= info->config.pio_threshold))
				receive_chars_pio(info, num_bytes);
			else
				receive_chars_dma(info, num_bytes);
		}
	}
	
	if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) &&
	    (scratch & 0x02) && (info->IER & UART_IER_THRI)) {
		if ((info->xmit_cnt <= 0) || info->tty->stopped) {
			info->IER &= ~UART_IER_THRI;
			serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
			serial_out(info, UART_ESI_CMD2, info->IER);
		} else {
			int num_bytes;

			serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND);
			serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL);
			num_bytes = serial_in(info, UART_ESI_STAT1) << 8;
			num_bytes |= serial_in(info, UART_ESI_STAT2);

			if (num_bytes > info->xmit_cnt)
				num_bytes = info->xmit_cnt;

			if (num_bytes) {
				if (dma_bytes ||
				    (info->stat_flags & ESP_STAT_USE_PIO) ||
				    (num_bytes <= info->config.pio_threshold))
					transmit_chars_pio(info, num_bytes);
				else
					transmit_chars_dma(info, num_bytes);
			}
		}
	}

	info->last_active = jiffies;

#ifdef SERIAL_DEBUG_INTR
	printk("end.\n");
#endif
	spin_unlock(&info->lock);
	return IRQ_HANDLED;
}

/*
 * -------------------------------------------------------------------
 * Here ends the serial interrupt routines.
 * -------------------------------------------------------------------
 */

static void do_softint(void *private_)
{
	struct esp_struct	*info = (struct esp_struct *) private_;
	struct tty_struct	*tty;
	
	tty = info->tty;
	if (!tty)
		return;

	if (test_and_clear_bit(ESP_EVENT_WRITE_WAKEUP, &info->event)) {
		tty_wakeup(tty);
	}
}

/*
 * This routine is called from the scheduler tqueue when the interrupt
 * routine has signalled that a hangup has occurred.  The path of
 * hangup processing is:
 *
 * 	serial interrupt routine -> (scheduler tqueue) ->
 * 	do_serial_hangup() -> tty->hangup() -> esp_hangup()
 * 
 */
static void do_serial_hangup(void *private_)
{
	struct esp_struct	*info = (struct esp_struct *) private_;
	struct tty_struct	*tty;
	
	tty = info->tty;
	if (tty)
		tty_hangup(tty);
}

/*
 * ---------------------------------------------------------------
 * Low level utility subroutines for the serial driver:  routines to
 * figure out the appropriate timeout for an interrupt chain, routines
 * to initialize and startup a serial port, and routines to shutdown a
 * serial port.  Useful stuff like that.
 *
 * Caller should hold lock
 * ---------------------------------------------------------------
 */

static inline void esp_basic_init(struct esp_struct * info)
{
	/* put ESPC in enhanced mode */
	serial_out(info, UART_ESI_CMD1, ESI_SET_MODE);
	
	if (info->stat_flags & ESP_STAT_NEVER_DMA)
		serial_out(info, UART_ESI_CMD2, 0x01);
	else
		serial_out(info, UART_ESI_CMD2, 0x31);

	/* disable interrupts for now */
	serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
	serial_out(info, UART_ESI_CMD2, 0x00);

	/* set interrupt and DMA channel */
	serial_out(info, UART_ESI_CMD1, ESI_SET_IRQ);

	if (info->stat_flags & ESP_STAT_NEVER_DMA)
		serial_out(info, UART_ESI_CMD2, 0x01);
	else
		serial_out(info, UART_ESI_CMD2, (dma << 4) | 0x01);

	serial_out(info, UART_ESI_CMD1, ESI_SET_ENH_IRQ);

	if (info->line % 8)	/* secondary port */
		serial_out(info, UART_ESI_CMD2, 0x0d);	/* shared */
	else if (info->irq == 9)
		serial_out(info, UART_ESI_CMD2, 0x02);
	else
		serial_out(info, UART_ESI_CMD2, info->irq);

	/* set error status mask (check this) */
	serial_out(info, UART_ESI_CMD1, ESI_SET_ERR_MASK);

	if (info->stat_flags & ESP_STAT_NEVER_DMA)
		serial_out(info, UART_ESI_CMD2, 0xa1);
	else
		serial_out(info, UART_ESI_CMD2, 0xbd);

	serial_out(info, UART_ESI_CMD2, 0x00);

	/* set DMA timeout */
	serial_out(info, UART_ESI_CMD1, ESI_SET_DMA_TMOUT);
	serial_out(info, UART_ESI_CMD2, 0xff);

	/* set FIFO trigger levels */
	serial_out(info, UART_ESI_CMD1, ESI_SET_TRIGGER);
	serial_out(info, UART_ESI_CMD2, info->config.rx_trigger >> 8);
	serial_out(info, UART_ESI_CMD2, info->config.rx_trigger);
	serial_out(info, UART_ESI_CMD2, info->config.tx_trigger >> 8);
	serial_out(info, UART_ESI_CMD2, info->config.tx_trigger);

	/* Set clock scaling and wait states */
	serial_out(info, UART_ESI_CMD1, ESI_SET_PRESCALAR);
	serial_out(info, UART_ESI_CMD2, 0x04 | ESPC_SCALE);

	/* set reinterrupt pacing */
	serial_out(info, UART_ESI_CMD1, ESI_SET_REINTR);
	serial_out(info, UART_ESI_CMD2, 0xff);
}

static int startup(struct esp_struct * info)
{
	unsigned long flags;
	int	retval=0;
        unsigned int num_chars;

        spin_lock_irqsave(&info->lock, flags);

	if (info->flags & ASYNC_INITIALIZED)
		goto out;

	if (!info->xmit_buf) {
		info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_ATOMIC);
		retval = -ENOMEM;
		if (!info->xmit_buf)
			goto out;
	}

#ifdef SERIAL_DEBUG_OPEN
	printk("starting up ttys%d (irq %d)...", info->line, info->irq);
#endif

	/* Flush the RX buffer.  Using the ESI flush command may cause */
	/* wild interrupts, so read all the data instead. */

	serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND);
	serial_out(info, UART_ESI_CMD1, ESI_GET_RX_AVAIL);
	num_chars = serial_in(info, UART_ESI_STAT1) << 8;
	num_chars |= serial_in(info, UART_ESI_STAT2);

	while (num_chars > 1) {
		inw(info->port + UART_ESI_RX);
		num_chars -= 2;
	}

	if (num_chars)
		serial_in(info, UART_ESI_RX);

	/* set receive character timeout */
	serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT);
	serial_out(info, UART_ESI_CMD2, info->config.rx_timeout);

	/* clear all flags except the "never DMA" flag */
	info->stat_flags &= ESP_STAT_NEVER_DMA;

	if (info->stat_flags & ESP_STAT_NEVER_DMA)
		info->stat_flags |= ESP_STAT_USE_PIO;

	spin_unlock_irqrestore(&info->lock, flags);

	/*
	 * Allocate the IRQ
	 */

	retval = request_irq(info->irq, rs_interrupt_single, SA_SHIRQ,
			     "esp serial", info);

	if (retval) {
		if (capable(CAP_SYS_ADMIN)) {
			if (info->tty)
				set_bit(TTY_IO_ERROR,
					&info->tty->flags);
			retval = 0;
		}
		goto out_unlocked;
	}

	if (!(info->stat_flags & ESP_STAT_USE_PIO) && !dma_buffer) {
		dma_buffer = (char *)__get_dma_pages(
			GFP_KERNEL, get_order(DMA_BUFFER_SZ));

		/* use PIO mode if DMA buf/chan cannot be allocated */
		if (!dma_buffer)
			info->stat_flags |= ESP_STAT_USE_PIO;
		else if (request_dma(dma, "esp serial")) {
			free_pages((unsigned long)dma_buffer,
				   get_order(DMA_BUFFER_SZ));
			dma_buffer = NULL;
			info->stat_flags |= ESP_STAT_USE_PIO;
		}
			
	}

	info->MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;

	spin_lock_irqsave(&info->lock, flags);
	serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
	serial_out(info, UART_ESI_CMD2, UART_MCR);
	serial_out(info, UART_ESI_CMD2, info->MCR);
	
	/*
	 * Finally, enable interrupts
	 */
	/* info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; */
	info->IER = UART_IER_RLSI | UART_IER_RDI | UART_IER_DMA_TMOUT |
			UART_IER_DMA_TC;
	serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
	serial_out(info, UART_ESI_CMD2, info->IER);
	
	if (info->tty)
		clear_bit(TTY_IO_ERROR, &info->tty->flags);
	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
	spin_unlock_irqrestore(&info->lock, flags);

	/*
	 * Set up the tty->alt_speed kludge
	 */
	if (info->tty) {
		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
			info->tty->alt_speed = 57600;
		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
			info->tty->alt_speed = 115200;
		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
			info->tty->alt_speed = 230400;
		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
			info->tty->alt_speed = 460800;
	}
	
	/*
	 * set the speed of the serial port
	 */
	change_speed(info);
	info->flags |= ASYNC_INITIALIZED;
	return 0;

out:
	spin_unlock_irqrestore(&info->lock, flags);
out_unlocked:
	return retval;
}

/*
 * This routine will shutdown a serial port; interrupts are disabled, and
 * DTR is dropped if the hangup on close termio flag is on.
 */
static void shutdown(struct esp_struct * info)
{
	unsigned long	flags, f;

	if (!(info->flags & ASYNC_INITIALIZED))
		return;

#ifdef SERIAL_DEBUG_OPEN
	printk("Shutting down serial port %d (irq %d)....", info->line,
	       info->irq);
#endif
	
	spin_lock_irqsave(&info->lock, flags);
	/*
	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
	 * here so the queue might never be waken up
	 */
	wake_up_interruptible(&info->delta_msr_wait);
	wake_up_interruptible(&info->break_wait);

	/* stop a DMA transfer on the port being closed */
	/* DMA lock is higher priority always */
	if (info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) {
		f=claim_dma_lock();
		disable_dma(dma);
		clear_dma_ff(dma);
		release_dma_lock(f);
		
		dma_bytes = 0;
	}
	
	/*
	 * Free the IRQ
	 */
	free_irq(info->irq, info);

	if (dma_buffer) {
		struct esp_struct *current_port = ports;

		while (current_port) {
			if ((current_port != info) &&
			    (current_port->flags & ASYNC_INITIALIZED))
				break;

			current_port = current_port->next_port;
		}

		if (!current_port) {
			free_dma(dma);
			free_pages((unsigned long)dma_buffer,
				   get_order(DMA_BUFFER_SZ));
			dma_buffer = NULL;
		}		
	}

	if (info->xmit_buf) {
		free_page((unsigned long) info->xmit_buf);
		info->xmit_buf = NULL;
	}

	info->IER = 0;
	serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
	serial_out(info, UART_ESI_CMD2, 0x00);

	if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
		info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);

	info->MCR &= ~UART_MCR_OUT2;
	serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
	serial_out(info, UART_ESI_CMD2, UART_MCR);
	serial_out(info, UART_ESI_CMD2, info->MCR);

	if (info->tty)
		set_bit(TTY_IO_ERROR, &info->tty->flags);
	
	info->flags &= ~ASYNC_INITIALIZED;
	spin_unlock_irqrestore(&info->lock, flags);
}

/*
 * This routine is called to set the UART divisor registers to match
 * the specified baud rate for a serial port.
 */
static void change_speed(struct esp_struct *info)
{
	unsigned short port;
	int	quot = 0;
	unsigned cflag,cval;
	int	baud, bits;
	unsigned char flow1 = 0, flow2 = 0;
	unsigned long flags;

	if (!info->tty || !info->tty->termios)
		return;
	cflag = info->tty->termios->c_cflag;
	port = info->port;
	
	/* byte size and parity */
	switch (cflag & CSIZE) {
	      case CS5: cval = 0x00; bits = 7; break;
	      case CS6: cval = 0x01; bits = 8; break;
	      case CS7: cval = 0x02; bits = 9; break;
	      case CS8: cval = 0x03; bits = 10; break;
	      default:  cval = 0x00; bits = 7; break;
	}
	if (cflag & CSTOPB) {
		cval |= 0x04;
		bits++;
	}
	if (cflag & PARENB) {
		cval |= UART_LCR_PARITY;
		bits++;
	}
	if (!(cflag & PARODD))
		cval |= UART_LCR_EPAR;
#ifdef CMSPAR
	if (cflag & CMSPAR)
		cval |= UART_LCR_SPAR;
#endif

	baud = tty_get_baud_rate(info->tty);
	if (baud == 38400 &&
	    ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
		quot = info->custom_divisor;
	else {
		if (baud == 134)
			/* Special case since 134 is really 134.5 */
			quot = (2*BASE_BAUD / 269);
		else if (baud)
			quot = BASE_BAUD / baud;
	}
	/* If the quotient is ever zero, default to 9600 bps */
	if (!quot)
		quot = BASE_BAUD / 9600;
	
	info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50);

	/* CTS flow control flag and modem status interrupts */
	/* info->IER &= ~UART_IER_MSI; */
	if (cflag & CRTSCTS) {
		info->flags |= ASYNC_CTS_FLOW;
		/* info->IER |= UART_IER_MSI; */
		flow1 = 0x04;
		flow2 = 0x10;
	} else
		info->flags &= ~ASYNC_CTS_FLOW;
	if (cflag & CLOCAL)
		info->flags &= ~ASYNC_CHECK_CD;
	else {
		info->flags |= ASYNC_CHECK_CD;
		/* info->IER |= UART_IER_MSI; */
	}

	/*
	 * Set up parity check flag
	 */
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))

	info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
	if (I_INPCK(info->tty))
		info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
		info->read_status_mask |= UART_LSR_BI;
	
	info->ignore_status_mask = 0;
#if 0
	/* This should be safe, but for some broken bits of hardware... */
	if (I_IGNPAR(info->tty)) {
		info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
		info->read_status_mask |= UART_LSR_PE | UART_LSR_FE;
	}
#endif
	if (I_IGNBRK(info->tty)) {
		info->ignore_status_mask |= UART_LSR_BI;
		info->read_status_mask |= UART_LSR_BI;
		/*
		 * If we're ignore parity and break indicators, ignore 
		 * overruns too.  (For real raw support).
		 */
		if (I_IGNPAR(info->tty)) {
			info->ignore_status_mask |= UART_LSR_OE | \
				UART_LSR_PE | UART_LSR_FE;
			info->read_status_mask |= UART_LSR_OE | \
				UART_LSR_PE | UART_LSR_FE;
		}
	}

	if (I_IXOFF(info->tty))
		flow1 |= 0x81;

	spin_lock_irqsave(&info->lock, flags);
	/* set baud */
	serial_out(info, UART_ESI_CMD1, ESI_SET_BAUD);
	serial_out(info, UART_ESI_CMD2, quot >> 8);
	serial_out(info, UART_ESI_CMD2, quot & 0xff);

	/* set data bits, parity, etc. */
	serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
	serial_out(info, UART_ESI_CMD2, UART_LCR);
	serial_out(info, UART_ESI_CMD2, cval);

	/* Enable flow control */
	serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CNTL);
	serial_out(info, UART_ESI_CMD2, flow1);
	serial_out(info, UART_ESI_CMD2, flow2);

	/* set flow control characters (XON/XOFF only) */
	if (I_IXOFF(info->tty)) {
		serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CHARS);
		serial_out(info, UART_ESI_CMD2, START_CHAR(info->tty));
		serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->tty));
		serial_out(info, UART_ESI_CMD2, 0x10);
		serial_out(info, UART_ESI_CMD2, 0x21);
		switch (cflag & CSIZE) {
			case CS5:
				serial_out(info, UART_ESI_CMD2, 0x1f);
				break;
			case CS6:
				serial_out(info, UART_ESI_CMD2, 0x3f);
				break;
			case CS7:
			case CS8:
				serial_out(info, UART_ESI_CMD2, 0x7f);
				break;
			default:
				serial_out(info, UART_ESI_CMD2, 0xff);
				break;
		}
	}

	/* Set high/low water */
	serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_LVL);
	serial_out(info, UART_ESI_CMD2, info->config.flow_off >> 8);
	serial_out(info, UART_ESI_CMD2, info->config.flow_off);
	serial_out(info, UART_ESI_CMD2, info->config.flow_on >> 8);
	serial_out(info, UART_ESI_CMD2, info->config.flow_on);

	spin_unlock_irqrestore(&info->lock, flags);
}

static void rs_put_char(struct tty_struct *tty, unsigned char ch)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;

	if (serial_paranoia_check(info, tty->name, "rs_put_char"))
		return;

	if (!info->xmit_buf)
		return;

	spin_lock_irqsave(&info->lock, flags);
	if (info->xmit_cnt < ESP_XMIT_SIZE - 1) {
		info->xmit_buf[info->xmit_head++] = ch;
		info->xmit_head &= ESP_XMIT_SIZE-1;
		info->xmit_cnt++;
	}
	spin_unlock_irqrestore(&info->lock, flags);
}

static void rs_flush_chars(struct tty_struct *tty)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;
				
	if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
		return;

	spin_lock_irqsave(&info->lock, flags);

	if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf)
		goto out;

	if (!(info->IER & UART_IER_THRI)) {
		info->IER |= UART_IER_THRI;
		serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
		serial_out(info, UART_ESI_CMD2, info->IER);
	}
out:
	spin_unlock_irqrestore(&info->lock, flags);
}

static int rs_write(struct tty_struct * tty,
		    const unsigned char *buf, int count)
{
	int	c, t, ret = 0;
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;

	if (serial_paranoia_check(info, tty->name, "rs_write"))
		return 0;

	if (!info->xmit_buf)
		return 0;
	    
	while (1) {
		/* Thanks to R. Wolff for suggesting how to do this with */
		/* interrupts enabled */

		c = count;
		t = ESP_XMIT_SIZE - info->xmit_cnt - 1;
		
		if (t < c)
			c = t;

		t = ESP_XMIT_SIZE - info->xmit_head;
		
		if (t < c)
			c = t;

		if (c <= 0)
			break;

		memcpy(info->xmit_buf + info->xmit_head, buf, c);

		info->xmit_head = (info->xmit_head + c) & (ESP_XMIT_SIZE-1);
		info->xmit_cnt += c;
		buf += c;
		count -= c;
		ret += c;
	}

	spin_lock_irqsave(&info->lock, flags);

	if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) {
		info->IER |= UART_IER_THRI;
		serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
		serial_out(info, UART_ESI_CMD2, info->IER);
	}

	spin_unlock_irqrestore(&info->lock, flags);
	return ret;
}

static int rs_write_room(struct tty_struct *tty)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	int	ret;
	unsigned long flags;
				
	if (serial_paranoia_check(info, tty->name, "rs_write_room"))
		return 0;

	spin_lock_irqsave(&info->lock, flags);

	ret = ESP_XMIT_SIZE - info->xmit_cnt - 1;
	if (ret < 0)
		ret = 0;
	spin_unlock_irqrestore(&info->lock, flags);
	return ret;
}

static int rs_chars_in_buffer(struct tty_struct *tty)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
				
	if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
		return 0;
	return info->xmit_cnt;
}

static void rs_flush_buffer(struct tty_struct *tty)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;
				
	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
		return;
	spin_lock_irqsave(&info->lock, flags);
	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
	spin_unlock_irqrestore(&info->lock, flags);
	tty_wakeup(tty);
}

/*
 * ------------------------------------------------------------
 * rs_throttle()
 * 
 * This routine is called by the upper-layer tty layer to signal that
 * incoming characters should be throttled.
 * ------------------------------------------------------------
 */
static void rs_throttle(struct tty_struct * tty)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
	char	buf[64];
	
	printk("throttle %s: %d....\n", tty_name(tty, buf),
	       tty->ldisc.chars_in_buffer(tty));
#endif

	if (serial_paranoia_check(info, tty->name, "rs_throttle"))
		return;

	spin_lock_irqsave(&info->lock, flags);
	info->IER &= ~UART_IER_RDI;
	serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
	serial_out(info, UART_ESI_CMD2, info->IER);
	serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT);
	serial_out(info, UART_ESI_CMD2, 0x00);
	spin_unlock_irqrestore(&info->lock, flags);
}

static void rs_unthrottle(struct tty_struct * tty)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;
#ifdef SERIAL_DEBUG_THROTTLE
	char	buf[64];
	
	printk("unthrottle %s: %d....\n", tty_name(tty, buf),
	       tty->ldisc.chars_in_buffer(tty));
#endif

	if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
		return;
	
	spin_lock_irqsave(&info->lock, flags);
	info->IER |= UART_IER_RDI;
	serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
	serial_out(info, UART_ESI_CMD2, info->IER);
	serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT);
	serial_out(info, UART_ESI_CMD2, info->config.rx_timeout);
	spin_unlock_irqrestore(&info->lock, flags);
}

/*
 * ------------------------------------------------------------
 * rs_ioctl() and friends
 * ------------------------------------------------------------
 */

static int get_serial_info(struct esp_struct * info,
			   struct serial_struct __user *retinfo)
{
	struct serial_struct tmp;
  
	memset(&tmp, 0, sizeof(tmp));
	tmp.type = PORT_16550A;
	tmp.line = info->line;
	tmp.port = info->port;
	tmp.irq = info->irq;
	tmp.flags = info->flags;
	tmp.xmit_fifo_size = 1024;
	tmp.baud_base = BASE_BAUD;
	tmp.close_delay = info->close_delay;
	tmp.closing_wait = info->closing_wait;
	tmp.custom_divisor = info->custom_divisor;
	tmp.hub6 = 0;
	if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
		return -EFAULT;
	return 0;
}

static int get_esp_config(struct esp_struct * info,
			  struct hayes_esp_config __user *retinfo)
{
	struct hayes_esp_config tmp;
  
	if (!retinfo)
		return -EFAULT;

	memset(&tmp, 0, sizeof(tmp));
	tmp.rx_timeout = info->config.rx_timeout;
	tmp.rx_trigger = info->config.rx_trigger;
	tmp.tx_trigger = info->config.tx_trigger;
	tmp.flow_off = info->config.flow_off;
	tmp.flow_on = info->config.flow_on;
	tmp.pio_threshold = info->config.pio_threshold;
	tmp.dma_channel = (info->stat_flags & ESP_STAT_NEVER_DMA ? 0 : dma);

	return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
}

static int set_serial_info(struct esp_struct * info,
			   struct serial_struct __user *new_info)
{
	struct serial_struct new_serial;
	struct esp_struct old_info;
	unsigned int change_irq;
	int retval = 0;
	struct esp_struct *current_async;

	if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
		return -EFAULT;
	old_info = *info;

	if ((new_serial.type != PORT_16550A) ||
	    (new_serial.hub6) ||
	    (info->port != new_serial.port) ||
	    (new_serial.baud_base != BASE_BAUD) ||
	    (new_serial.irq > 15) ||
	    (new_serial.irq < 2) ||
	    (new_serial.irq == 6) ||
	    (new_serial.irq == 8) ||
	    (new_serial.irq == 13))
		return -EINVAL;

	change_irq = new_serial.irq != info->irq;

	if (change_irq && (info->line % 8))
		return -EINVAL;

	if (!capable(CAP_SYS_ADMIN)) {
		if (change_irq || 
		    (new_serial.close_delay != info->close_delay) ||
		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
		     (info->flags & ~ASYNC_USR_MASK)))
			return -EPERM;
		info->flags = ((info->flags & ~ASYNC_USR_MASK) |
			       (new_serial.flags & ASYNC_USR_MASK));
		info->custom_divisor = new_serial.custom_divisor;
	} else {
		if (new_serial.irq == 2)
			new_serial.irq = 9;

		if (change_irq) {
			current_async = ports;

			while (current_async) {
				if ((current_async->line >= info->line) &&
				    (current_async->line < (info->line + 8))) {
					if (current_async == info) {
						if (current_async->count > 1)
							return -EBUSY;
					} else if (current_async->count)
						return -EBUSY;
				}

				current_async = current_async->next_port;
			}
		}

		/*
		 * OK, past this point, all the error checking has been done.
		 * At this point, we start making changes.....
		 */

		info->flags = ((info->flags & ~ASYNC_FLAGS) |
			       (new_serial.flags & ASYNC_FLAGS));
		info->custom_divisor = new_serial.custom_divisor;
		info->close_delay = new_serial.close_delay * HZ/100;
		info->closing_wait = new_serial.closing_wait * HZ/100;

		if (change_irq) {
			/*
			 * We need to shutdown the serial port at the old
			 * port/irq combination.
			 */
			shutdown(info);

			current_async = ports;

			while (current_async) {
				if ((current_async->line >= info->line) &&
				    (current_async->line < (info->line + 8)))
					current_async->irq = new_serial.irq;

				current_async = current_async->next_port;
			}

			serial_out(info, UART_ESI_CMD1, ESI_SET_ENH_IRQ);
			if (info->irq == 9)
				serial_out(info, UART_ESI_CMD2, 0x02);
			else
				serial_out(info, UART_ESI_CMD2, info->irq);
		}
	}

	if (info->flags & ASYNC_INITIALIZED) {
		if (((old_info.flags & ASYNC_SPD_MASK) !=
		     (info->flags & ASYNC_SPD_MASK)) ||
		    (old_info.custom_divisor != info->custom_divisor)) {
			if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
				info->tty->alt_speed = 57600;
			if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
				info->tty->alt_speed = 115200;
			if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
				info->tty->alt_speed = 230400;
			if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
				info->tty->alt_speed = 460800;
			change_speed(info);
		}
	} else
		retval = startup(info);

	return retval;
}

static int set_esp_config(struct esp_struct * info,
			  struct hayes_esp_config __user * new_info)
{
	struct hayes_esp_config new_config;
	unsigned int change_dma;
	int retval = 0;
	struct esp_struct *current_async;
	unsigned long flags;

	/* Perhaps a non-sysadmin user should be able to do some of these */
	/* operations.  I haven't decided yet. */

	if (!capable(CAP_SYS_ADMIN))
		return -EPERM;

	if (copy_from_user(&new_config, new_info, sizeof(new_config)))
		return -EFAULT;

	if ((new_config.flow_on >= new_config.flow_off) ||
	    (new_config.rx_trigger < 1) ||
	    (new_config.tx_trigger < 1) ||
	    (new_config.flow_off < 1) ||
	    (new_config.flow_on < 1) ||
	    (new_config.rx_trigger > 1023) ||
	    (new_config.tx_trigger > 1023) ||
	    (new_config.flow_off > 1023) ||
	    (new_config.flow_on > 1023) ||
	    (new_config.pio_threshold < 0) ||
	    (new_config.pio_threshold > 1024))
		return -EINVAL;

	if ((new_config.dma_channel != 1) && (new_config.dma_channel != 3))
		new_config.dma_channel = 0;

	if (info->stat_flags & ESP_STAT_NEVER_DMA)
		change_dma = new_config.dma_channel;
	else
		change_dma = (new_config.dma_channel != dma);

	if (change_dma) {
		if (new_config.dma_channel) {
			/* PIO mode to DMA mode transition OR */
			/* change current DMA channel */
			
			current_async = ports;

			while (current_async) {
				if (current_async == info) {
					if (current_async->count > 1)
						return -EBUSY;
				} else if (current_async->count)
					return -EBUSY;
					
				current_async =
					current_async->next_port;
			}

			shutdown(info);
			dma = new_config.dma_channel;
			info->stat_flags &= ~ESP_STAT_NEVER_DMA;
			
                        /* all ports must use the same DMA channel */

			spin_lock_irqsave(&info->lock, flags);
			current_async = ports;

			while (current_async) {
				esp_basic_init(current_async);
				current_async = current_async->next_port;
			}
			spin_unlock_irqrestore(&info->lock, flags);
		} else {
			/* DMA mode to PIO mode only */
			
			if (info->count > 1)
				return -EBUSY;

			shutdown(info);
			spin_lock_irqsave(&info->lock, flags);
			info->stat_flags |= ESP_STAT_NEVER_DMA;
			esp_basic_init(info);
			spin_unlock_irqrestore(&info->lock, flags);
		}
	}

	info->config.pio_threshold = new_config.pio_threshold;

	if ((new_config.flow_off != info->config.flow_off) ||
	    (new_config.flow_on != info->config.flow_on)) {
		unsigned long flags;

		info->config.flow_off = new_config.flow_off;
		info->config.flow_on = new_config.flow_on;

		spin_lock_irqsave(&info->lock, flags);
		serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_LVL);
		serial_out(info, UART_ESI_CMD2, new_config.flow_off >> 8);
		serial_out(info, UART_ESI_CMD2, new_config.flow_off);
		serial_out(info, UART_ESI_CMD2, new_config.flow_on >> 8);
		serial_out(info, UART_ESI_CMD2, new_config.flow_on);
		spin_unlock_irqrestore(&info->lock, flags);
	}

	if ((new_config.rx_trigger != info->config.rx_trigger) ||
	    (new_config.tx_trigger != info->config.tx_trigger)) {
		unsigned long flags;

		info->config.rx_trigger = new_config.rx_trigger;
		info->config.tx_trigger = new_config.tx_trigger;
		spin_lock_irqsave(&info->lock, flags);
		serial_out(info, UART_ESI_CMD1, ESI_SET_TRIGGER);
		serial_out(info, UART_ESI_CMD2,
			   new_config.rx_trigger >> 8);
		serial_out(info, UART_ESI_CMD2, new_config.rx_trigger);
		serial_out(info, UART_ESI_CMD2,
			   new_config.tx_trigger >> 8);
		serial_out(info, UART_ESI_CMD2, new_config.tx_trigger);
		spin_unlock_irqrestore(&info->lock, flags);
	}

	if (new_config.rx_timeout != info->config.rx_timeout) {
		unsigned long flags;

		info->config.rx_timeout = new_config.rx_timeout;
		spin_lock_irqsave(&info->lock, flags);

		if (info->IER & UART_IER_RDI) {
			serial_out(info, UART_ESI_CMD1,
				   ESI_SET_RX_TIMEOUT);
			serial_out(info, UART_ESI_CMD2,
				   new_config.rx_timeout);
		}

		spin_unlock_irqrestore(&info->lock, flags);
	}

	if (!(info->flags & ASYNC_INITIALIZED))
		retval = startup(info);

	return retval;
}

/*
 * get_lsr_info - get line status register info
 *
 * Purpose: Let user call ioctl() to get info when the UART physically
 * 	    is emptied.  On bus types like RS485, the transmitter must
 * 	    release the bus after transmitting. This must be done when
 * 	    the transmit shift register is empty, not be done when the
 * 	    transmit holding register is empty.  This functionality
 * 	    allows an RS485 driver to be written in user space. 
 */
static int get_lsr_info(struct esp_struct * info, unsigned int __user *value)
{
	unsigned char status;
	unsigned int result;
	unsigned long flags;

	spin_lock_irqsave(&info->lock, flags);
	serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT);
	status = serial_in(info, UART_ESI_STAT1);
	spin_unlock_irqrestore(&info->lock, flags);
	result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
	return put_user(result,value);
}


static int esp_tiocmget(struct tty_struct *tty, struct file *file)
{
	struct esp_struct * info = (struct esp_struct *)tty->driver_data;
	unsigned char control, status;
	unsigned long flags;

	if (serial_paranoia_check(info, tty->name, __FUNCTION__))
		return -ENODEV;
	if (tty->flags & (1 << TTY_IO_ERROR))
		return -EIO;

	control = info->MCR;

	spin_lock_irqsave(&info->lock, flags);
	serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT);
	status = serial_in(info, UART_ESI_STAT2);
	spin_unlock_irqrestore(&info->lock, flags);

	return    ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
		| ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
		| ((status  & UART_MSR_DCD) ? TIOCM_CAR : 0)
		| ((status  & UART_MSR_RI) ? TIOCM_RNG : 0)
		| ((status  & UART_MSR_DSR) ? TIOCM_DSR : 0)
		| ((status  & UART_MSR_CTS) ? TIOCM_CTS : 0);
}

static int esp_tiocmset(struct tty_struct *tty, struct file *file,
			unsigned int set, unsigned int clear)
{
	struct esp_struct * info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;

	if (serial_paranoia_check(info, tty->name, __FUNCTION__))
		return -ENODEV;
	if (tty->flags & (1 << TTY_IO_ERROR))
		return -EIO;

	spin_lock_irqsave(&info->lock, flags);

	if (set & TIOCM_RTS)
		info->MCR |= UART_MCR_RTS;
	if (set & TIOCM_DTR)
		info->MCR |= UART_MCR_DTR;

	if (clear & TIOCM_RTS)
		info->MCR &= ~UART_MCR_RTS;
	if (clear & TIOCM_DTR)
		info->MCR &= ~UART_MCR_DTR;

	serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
	serial_out(info, UART_ESI_CMD2, UART_MCR);
	serial_out(info, UART_ESI_CMD2, info->MCR);

	spin_unlock_irqrestore(&info->lock, flags);
	return 0;
}

/*
 * rs_break() --- routine which turns the break handling on or off
 */
static void esp_break(struct tty_struct *tty, int break_state)
{
	struct esp_struct * info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;
	
	if (serial_paranoia_check(info, tty->name, "esp_break"))
		return;

	if (break_state == -1) {
		spin_lock_irqsave(&info->lock, flags);
		serial_out(info, UART_ESI_CMD1, ESI_ISSUE_BREAK);
		serial_out(info, UART_ESI_CMD2, 0x01);
		spin_unlock_irqrestore(&info->lock, flags);

		/* FIXME - new style wait needed here */
		interruptible_sleep_on(&info->break_wait);
	} else {
		spin_lock_irqsave(&info->lock, flags);
		serial_out(info, UART_ESI_CMD1, ESI_ISSUE_BREAK);
		serial_out(info, UART_ESI_CMD2, 0x00);
		spin_unlock_irqrestore(&info->lock, flags);
	}
}

static int rs_ioctl(struct tty_struct *tty, struct file * file,
		    unsigned int cmd, unsigned long arg)
{
	struct esp_struct * info = (struct esp_struct *)tty->driver_data;
	struct async_icount cprev, cnow;	/* kernel counter temps */
	struct serial_icounter_struct __user *p_cuser;	/* user space */
	void __user *argp = (void __user *)arg;
	unsigned long flags;

	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
		return -ENODEV;

	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD)  &&
	    (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT) &&
	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT) &&
	    (cmd != TIOCGHAYESESP) && (cmd != TIOCSHAYESESP)) {
		if (tty->flags & (1 << TTY_IO_ERROR))
		    return -EIO;
	}
	
	switch (cmd) {
		case TIOCGSERIAL:
			return get_serial_info(info, argp);
		case TIOCSSERIAL:
			return set_serial_info(info, argp);
		case TIOCSERCONFIG:
			/* do not reconfigure after initial configuration */
			return 0;

		case TIOCSERGWILD:
			return put_user(0L, (unsigned long __user *)argp);

		case TIOCSERGETLSR: /* Get line status register */
			    return get_lsr_info(info, argp);

		case TIOCSERSWILD:
			if (!capable(CAP_SYS_ADMIN))
				return -EPERM;
			return 0;

		/*
		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
		 * - mask passed in arg for lines of interest
 		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
		 * Caller should use TIOCGICOUNT to see which one it was
		 */
		 case TIOCMIWAIT:
			spin_lock_irqsave(&info->lock, flags);
			cprev = info->icount;	/* note the counters on entry */
			spin_unlock_irqrestore(&info->lock, flags);
			while (1) {
				/* FIXME: convert to new style wakeup */
				interruptible_sleep_on(&info->delta_msr_wait);
				/* see if a signal did it */
				if (signal_pending(current))
					return -ERESTARTSYS;
				spin_lock_irqsave(&info->lock, flags);
				cnow = info->icount;	/* atomic copy */
				spin_unlock_irqrestore(&info->lock, flags);
				if (cnow.rng == cprev.rng &&
				    cnow.dsr == cprev.dsr && 
				    cnow.dcd == cprev.dcd &&
				    cnow.cts == cprev.cts)
					return -EIO; /* no change => error */
				if (((arg & TIOCM_RNG) &&
				     (cnow.rng != cprev.rng)) ||
				     ((arg & TIOCM_DSR) &&
				      (cnow.dsr != cprev.dsr)) ||
				     ((arg & TIOCM_CD) &&
				      (cnow.dcd != cprev.dcd)) ||
				     ((arg & TIOCM_CTS) &&
				      (cnow.cts != cprev.cts)) ) {
					return 0;
				}
				cprev = cnow;
			}
			/* NOTREACHED */

		/* 
		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
		 * Return: write counters to the user passed counter struct
		 * NB: both 1->0 and 0->1 transitions are counted except for
		 *     RI where only 0->1 is counted.
		 */
		case TIOCGICOUNT:
			spin_lock_irqsave(&info->lock, flags);
			cnow = info->icount;
			spin_unlock_irqrestore(&info->lock, flags);
			p_cuser = argp;
			if (put_user(cnow.cts, &p_cuser->cts) ||
			    put_user(cnow.dsr, &p_cuser->dsr) ||
			    put_user(cnow.rng, &p_cuser->rng) ||
			    put_user(cnow.dcd, &p_cuser->dcd))
				return -EFAULT;

			return 0;
	case TIOCGHAYESESP:
		return get_esp_config(info, argp);
	case TIOCSHAYESESP:
		return set_esp_config(info, argp);

		default:
			return -ENOIOCTLCMD;
		}
	return 0;
}

static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;

	if (   (tty->termios->c_cflag == old_termios->c_cflag)
	    && (   RELEVANT_IFLAG(tty->termios->c_iflag) 
		== RELEVANT_IFLAG(old_termios->c_iflag)))
		return;

	change_speed(info);

	spin_lock_irqsave(&info->lock, flags);

	/* Handle transition to B0 status */
	if ((old_termios->c_cflag & CBAUD) &&
		!(tty->termios->c_cflag & CBAUD)) {
		info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
		serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
		serial_out(info, UART_ESI_CMD2, UART_MCR);
		serial_out(info, UART_ESI_CMD2, info->MCR);
	}

	/* Handle transition away from B0 status */
	if (!(old_termios->c_cflag & CBAUD) &&
		(tty->termios->c_cflag & CBAUD)) {
		info->MCR |= (UART_MCR_DTR | UART_MCR_RTS);
		serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
		serial_out(info, UART_ESI_CMD2, UART_MCR);
		serial_out(info, UART_ESI_CMD2, info->MCR);
	}

	spin_unlock_irqrestore(&info->lock, flags);

	/* Handle turning of CRTSCTS */
	if ((old_termios->c_cflag & CRTSCTS) &&
	    !(tty->termios->c_cflag & CRTSCTS)) {
		rs_start(tty);
	}
}

/*
 * ------------------------------------------------------------
 * rs_close()
 * 
 * This routine is called when the serial port gets closed.  First, we
 * wait for the last remaining data to be sent.  Then, we unlink its
 * async structure from the interrupt chain if necessary, and we free
 * that IRQ if nothing is left in the chain.
 * ------------------------------------------------------------
 */
static void rs_close(struct tty_struct *tty, struct file * filp)
{
	struct esp_struct * info = (struct esp_struct *)tty->driver_data;
	unsigned long flags;

	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
		return;
	
	spin_lock_irqsave(&info->lock, flags);
	
	if (tty_hung_up_p(filp)) {
		DBG_CNT("before DEC-hung");
		goto out;
	}
	
#ifdef SERIAL_DEBUG_OPEN
	printk("rs_close ttys%d, count = %d\n", info->line, info->count);
#endif
	if ((tty->count == 1) && (info->count != 1)) {
		/*
		 * Uh, oh.  tty->count is 1, which means that the tty
		 * structure will be freed.  Info->count should always
		 * be one in these conditions.  If it's greater than
		 * one, we've got real problems, since it means the
		 * serial port won't be shutdown.
		 */
		printk("rs_close: bad serial port count; tty->count is 1, "
		       "info->count is %d\n", info->count);
		info->count = 1;
	}
	if (--info->count < 0) {
		printk("rs_close: bad serial port count for ttys%d: %d\n",
		       info->line, info->count);
		info->count = 0;
	}
	if (info->count) {
		DBG_CNT("before DEC-2");
		goto out;
	}
	info->flags |= ASYNC_CLOSING;

	spin_unlock_irqrestore(&info->lock, flags);
	/*
	 * Now we wait for the transmit buffer to clear; and we notify 
	 * the line discipline to only process XON/XOFF characters.
	 */
	tty->closing = 1;
	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
		tty_wait_until_sent(tty, info->closing_wait);
	/*
	 * At this point we stop accepting input.  To do this, we
	 * disable the receive line status interrupts, and tell the
	 * interrupt driver to stop checking the data ready bit in the
	 * line status register.
	 */
	/* info->IER &= ~UART_IER_RLSI; */
	info->IER &= ~UART_IER_RDI;
	info->read_status_mask &= ~UART_LSR_DR;
	if (info->flags & ASYNC_INITIALIZED) {

		spin_lock_irqsave(&info->lock, flags);
		serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
		serial_out(info, UART_ESI_CMD2, info->IER);

		/* disable receive timeout */
		serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT);
		serial_out(info, UART_ESI_CMD2, 0x00);

		spin_unlock_irqrestore(&info->lock, flags);

		/*
		 * Before we drop DTR, make sure the UART transmitter
		 * has completely drained; this is especially
		 * important if there is a transmit FIFO!
		 */
		rs_wait_until_sent(tty, info->timeout);
	}
	shutdown(info);
	if (tty->driver->flush_buffer)
		tty->driver->flush_buffer(tty);
	tty_ldisc_flush(tty);
	tty->closing = 0;
	info->event = 0;
	info->tty = NULL;

	if (info->blocked_open) {
		if (info->close_delay) {
			msleep_interruptible(jiffies_to_msecs(info->close_delay));
		}
		wake_up_interruptible(&info->open_wait);
	}
	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
	wake_up_interruptible(&info->close_wait);
	return;

out:
	spin_unlock_irqrestore(&info->lock, flags);
}

static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
{
	struct esp_struct *info = (struct esp_struct *)tty->driver_data;
	unsigned long orig_jiffies, char_time;
	unsigned long flags;

	if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
		return;

	orig_jiffies = jiffies;
	char_time = ((info->timeout - HZ / 50) / 1024) / 5;

	if (!char_time)
		char_time = 1;

	spin_lock_irqsave(&info->lock, flags);
	serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND);
	serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL);

	while ((serial_in(info, UART_ESI_STAT1) != 0x03) ||
		(serial_in(info, UART_ESI_STAT2) != 0xff)) {

		spin_unlock_irqrestore(&info->lock, flags);
		msleep_interruptible(jiffies_to_msecs(char_time));

		if (signal_pending(current))
			break;

		if (timeout && time_after(jiffies, orig_jiffies + timeout))
			break;

		spin_lock_irqsave(&info->lock, flags);
		serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND);
		serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL);
	}
	spin_unlock_irqrestore(&info->lock, flags);
	set_current_state(TASK_RUNNING);
}

/*
 * esp_hangup() --- called by tty_hangup() when a hangup is signaled.
 */
static void esp_hangup(struct tty_struct *tty)
{
	struct esp_struct * info = (struct esp_struct *)tty->driver_data;
	
	if (serial_paranoia_check(info, tty->name, "esp_hangup"))
		return;
	
	rs_flush_buffer(tty);
	shutdown(info);
	info->event = 0;
	info->count = 0;
	info->flags &= ~ASYNC_NORMAL_ACTIVE;
	info->tty = NULL;
	wake_up_interruptible(&info->open_wait);
}

/*
 * ------------------------------------------------------------
 * esp_open() and friends
 * ------------------------------------------------------------
 */
static int block_til_ready(struct tty_struct *tty, struct file * filp,
			   struct esp_struct *info)
{
	DECLARE_WAITQUEUE(wait, current);
	int		retval;
	int		do_clocal = 0;
	unsigned long	flags;

	/*
	 * If the device is in the middle of being closed, then block
	 * until it's done, and then try again.
	 */
	if (tty_hung_up_p(filp) ||
	    (info->flags & ASYNC_CLOSING)) {
		if (info->flags & ASYNC_CLOSING)
			interruptible_sleep_on(&info->close_wait);
#ifdef SERIAL_DO_RESTART
		if (info->flags & ASYNC_HUP_NOTIFY)
			return -EAGAIN;
		else
			return -ERESTARTSYS;
#else
		return -EAGAIN;
#endif
	}

	/*
	 * If non-blocking mode is set, or the port is not enabled,
	 * then make the check up front and then exit.
	 */
	if ((filp->f_flags & O_NONBLOCK) ||
	    (tty->flags & (1 << TTY_IO_ERROR))) {
		info->flags |= ASYNC_NORMAL_ACTIVE;
		return 0;
	}

	if (tty->termios->c_cflag & CLOCAL)
		do_clocal = 1;

	/*
	 * Block waiting for the carrier detect and the line to become
	 * free (i.e., not in use by the callout).  While we are in
	 * this loop, info->count is dropped by one, so that
	 * rs_close() knows when to free things.  We restore it upon
	 * exit, either normal or abnormal.
	 */
	retval = 0;
	add_wait_queue(&info->open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
	printk("block_til_ready before block: ttys%d, count = %d\n",
	       info->line, info->count);
#endif
	spin_lock_irqsave(&info->lock, flags);
	if (!tty_hung_up_p(filp)) 
		info->count--;
	info->blocked_open++;
	while (1) {
		if ((tty->termios->c_cflag & CBAUD)) {
			unsigned int scratch;

			serial_out(info, UART_ESI_CMD1, ESI_READ_UART);
			serial_out(info, UART_ESI_CMD2, UART_MCR);
			scratch = serial_in(info, UART_ESI_STAT1);
			serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
			serial_out(info, UART_ESI_CMD2, UART_MCR);
			serial_out(info, UART_ESI_CMD2,
				scratch | UART_MCR_DTR | UART_MCR_RTS);
		}
		set_current_state(TASK_INTERRUPTIBLE);
		if (tty_hung_up_p(filp) ||
		    !(info->flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
			if (info->flags & ASYNC_HUP_NOTIFY)
				retval = -EAGAIN;
			else
				retval = -ERESTARTSYS;	
#else
			retval = -EAGAIN;
#endif
			break;
		}

		serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT);
		if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD)
			do_clocal = 1;

		if (!(info->flags & ASYNC_CLOSING) &&
		    (do_clocal))
			break;
		if (signal_pending(current)) {
			retval = -ERESTARTSYS;
			break;
		}
#ifdef SERIAL_DEBUG_OPEN
		printk("block_til_ready blocking: ttys%d, count = %d\n",
		       info->line, info->count);
#endif
		spin_unlock_irqrestore(&info->lock, flags);
		schedule();
		spin_lock_irqsave(&info->lock, flags);
	}
	set_current_state(TASK_RUNNING);
	remove_wait_queue(&info->open_wait, &wait);
	if (!tty_hung_up_p(filp))
		info->count++;
	info->blocked_open--;
	spin_unlock_irqrestore(&info->lock, flags);
#ifdef SERIAL_DEBUG_OPEN
	printk("block_til_ready after blocking: ttys%d, count = %d\n",
	       info->line, info->count);
#endif
	if (retval)
		return retval;
	info->flags |= ASYNC_NORMAL_ACTIVE;
	return 0;
}	

/*
 * This routine is called whenever a serial port is opened.  It
 * enables interrupts for a serial port, linking in its async structure into
 * the IRQ chain.   It also performs the serial-specific
 * initialization for the tty structure.
 */
static int esp_open(struct tty_struct *tty, struct file * filp)
{
	struct esp_struct	*info;
	int 			retval, line;
	unsigned long		flags;

	line = tty->index;
	if ((line < 0) || (line >= NR_PORTS))
		return -ENODEV;

	/* find the port in the chain */

	info = ports;

	while (info && (info->line != line))
		info = info->next_port;

	if (!info) {
		serial_paranoia_check(info, tty->name, "esp_open");
		return -ENODEV;
	}

#ifdef SERIAL_DEBUG_OPEN
	printk("esp_open %s, count = %d\n", tty->name, info->count);
#endif
	spin_lock_irqsave(&info->lock, flags);
	info->count++;
	tty->driver_data = info;
	info->tty = tty;

	spin_unlock_irqrestore(&info->lock, flags);
	
	/*
	 * Start up serial port
	 */
	retval = startup(info);
	if (retval)
		return retval;

	retval = block_til_ready(tty, filp, info);
	if (retval) {
#ifdef SERIAL_DEBUG_OPEN
		printk("esp_open returning after block_til_ready with %d\n",
		       retval);
#endif
		return retval;
	}

#ifdef SERIAL_DEBUG_OPEN
	printk("esp_open %s successful...", tty->name);
#endif
	return 0;
}

/*
 * ---------------------------------------------------------------------
 * espserial_init() and friends
 *
 * espserial_init() is called at boot-time to initialize the serial driver.
 * ---------------------------------------------------------------------
 */

/*
 * This routine prints out the appropriate serial driver version
 * number, and identifies which options were configured into this
 * driver.
 */
 
static inline void show_serial_version(void)
{
 	printk(KERN_INFO "%s version %s (DMA %u)\n",
		serial_name, serial_version, dma);
}

/*
 * This routine is called by espserial_init() to initialize a specific serial
 * port.
 */
static inline int autoconfig(struct esp_struct * info)
{
	int port_detected = 0;
	unsigned long flags;

	if (!request_region(info->port, REGION_SIZE, "esp serial"))
		return -EIO;

	spin_lock_irqsave(&info->lock, flags);
	/*
	 * Check for ESP card
	 */

	if (serial_in(info, UART_ESI_BASE) == 0xf3) {
		serial_out(info, UART_ESI_CMD1, 0x00);
		serial_out(info, UART_ESI_CMD1, 0x01);

		if ((serial_in(info, UART_ESI_STAT2) & 0x70) == 0x20) {
			port_detected = 1;

			if (!(info->irq)) {
				serial_out(info, UART_ESI_CMD1, 0x02);

				if (serial_in(info, UART_ESI_STAT1) & 0x01)
					info->irq = 3;
				else
					info->irq = 4;
			}


			/* put card in enhanced mode */
			/* this prevents access through */
			/* the "old" IO ports */
			esp_basic_init(info);

			/* clear out MCR */
			serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART);
			serial_out(info, UART_ESI_CMD2, UART_MCR);
			serial_out(info, UART_ESI_CMD2, 0x00);
		}
	}
	if (!port_detected)
		release_region(info->port, REGION_SIZE);

	spin_unlock_irqrestore(&info->lock, flags);
	return (port_detected);
}

static struct tty_operations esp_ops = {
	.open = esp_open,
	.close = rs_close,
	.write = rs_write,
	.put_char = rs_put_char,
	.flush_chars = rs_flush_chars,
	.write_room = rs_write_room,
	.chars_in_buffer = rs_chars_in_buffer,
	.flush_buffer = rs_flush_buffer,
	.ioctl = rs_ioctl,
	.throttle = rs_throttle,
	.unthrottle = rs_unthrottle,
	.set_termios = rs_set_termios,
	.stop = rs_stop,
	.start = rs_start,
	.hangup = esp_hangup,
	.break_ctl = esp_break,
	.wait_until_sent = rs_wait_until_sent,
	.tiocmget = esp_tiocmget,
	.tiocmset = esp_tiocmset,
};

/*
 * The serial driver boot-time initialization code!
 */
static int __init espserial_init(void)
{
	int i, offset;
	struct esp_struct * info;
	struct esp_struct *last_primary = NULL;
	int esp[] = {0x100,0x140,0x180,0x200,0x240,0x280,0x300,0x380};

	esp_driver = alloc_tty_driver(NR_PORTS);
	if (!esp_driver)
		return -ENOMEM;
	
	for (i = 0; i < NR_PRIMARY; i++) {
		if (irq[i] != 0) {
			if ((irq[i] < 2) || (irq[i] > 15) || (irq[i] == 6) ||
			    (irq[i] == 8) || (irq[i] == 13))
				irq[i] = 0;
			else if (irq[i] == 2)
				irq[i] = 9;
		}
	}

	if ((dma != 1) && (dma != 3))
		dma = 0;

	if ((rx_trigger < 1) || (rx_trigger > 1023))
		rx_trigger = 768;

	if ((tx_trigger < 1) || (tx_trigger > 1023))
		tx_trigger = 768;

	if ((flow_off < 1) || (flow_off > 1023))
		flow_off = 1016;
	
	if ((flow_on < 1) || (flow_on > 1023))
		flow_on = 944;

	if ((rx_timeout < 0) || (rx_timeout > 255))
		rx_timeout = 128;
	
	if (flow_on >= flow_off)
		flow_on = flow_off - 1;

	show_serial_version();

	/* Initialize the tty_driver structure */
	
	esp_driver->owner = THIS_MODULE;
	esp_driver->name = "ttyP";
	esp_driver->devfs_name = "tts/P";
	esp_driver->major = ESP_IN_MAJOR;
	esp_driver->minor_start = 0;
	esp_driver->type = TTY_DRIVER_TYPE_SERIAL;
	esp_driver->subtype = SERIAL_TYPE_NORMAL;
	esp_driver->init_termios = tty_std_termios;
	esp_driver->init_termios.c_cflag =
		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
	esp_driver->flags = TTY_DRIVER_REAL_RAW;
	tty_set_operations(esp_driver, &esp_ops);
	if (tty_register_driver(esp_driver))
	{
		printk(KERN_ERR "Couldn't register esp serial driver");
		put_tty_driver(esp_driver);
		return 1;
	}

	info = kmalloc(sizeof(struct esp_struct), GFP_KERNEL);

	if (!info)
	{
		printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n");
		tty_unregister_driver(esp_driver);
		put_tty_driver(esp_driver);
		return 1;
	}

	memset((void *)info, 0, sizeof(struct esp_struct));
	spin_lock_init(&info->lock);
	/* rx_trigger, tx_trigger are needed by autoconfig */
	info->config.rx_trigger = rx_trigger;
	info->config.tx_trigger = tx_trigger;

	i = 0;
	offset = 0;

	do {
		info->port = esp[i] + offset;
		info->irq = irq[i];
		info->line = (i * 8) + (offset / 8);

		if (!autoconfig(info)) {
			i++;
			offset = 0;
			continue;
		}

		info->custom_divisor = (divisor[i] >> (offset / 2)) & 0xf;
		info->flags = STD_COM_FLAGS;
		if (info->custom_divisor)
			info->flags |= ASYNC_SPD_CUST;
		info->magic = ESP_MAGIC;
		info->close_delay = 5*HZ/10;
		info->closing_wait = 30*HZ;
		INIT_WORK(&info->tqueue, do_softint, info);
		INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
		info->config.rx_timeout = rx_timeout;
		info->config.flow_on = flow_on;
		info->config.flow_off = flow_off;
		info->config.pio_threshold = pio_threshold;
		info->next_port = ports;
		init_waitqueue_head(&info->open_wait);
		init_waitqueue_head(&info->close_wait);
		init_waitqueue_head(&info->delta_msr_wait);
		init_waitqueue_head(&info->break_wait);
		ports = info;
		printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ",
			info->line, info->port, info->irq);

		if (info->line % 8) {
			printk("secondary port\n");
			/* 8 port cards can't do DMA */
			info->stat_flags |= ESP_STAT_NEVER_DMA;

			if (last_primary)
				last_primary->stat_flags |= ESP_STAT_NEVER_DMA;
		} else {
			printk("primary port\n");
			last_primary = info;
			irq[i] = info->irq;
		}

		if (!dma)
			info->stat_flags |= ESP_STAT_NEVER_DMA;

		info = kmalloc(sizeof(struct esp_struct), GFP_KERNEL);
		if (!info)
		{
			printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); 

			/* allow use of the already detected ports */
			return 0;
		}

		memset((void *)info, 0, sizeof(struct esp_struct));
		/* rx_trigger, tx_trigger are needed by autoconfig */
		info->config.rx_trigger = rx_trigger;
		info->config.tx_trigger = tx_trigger;

		if (offset == 56) {
			i++;
			offset = 0;
		} else {
			offset += 8;
		}
	} while (i < NR_PRIMARY);

	/* free the last port memory allocation */
	kfree(info);

	return 0;
}

static void __exit espserial_exit(void) 
{
	int e1;
	struct esp_struct *temp_async;
	struct esp_pio_buffer *pio_buf;

	/* printk("Unloading %s: version %s\n", serial_name, serial_version); */
	if ((e1 = tty_unregister_driver(esp_driver)))
		printk("SERIAL: failed to unregister serial driver (%d)\n",
		       e1);
	put_tty_driver(esp_driver);

	while (ports) {
		if (ports->port) {
			release_region(ports->port, REGION_SIZE);
		}
		temp_async = ports->next_port;
		kfree(ports);
		ports = temp_async;
	}

	if (dma_buffer)
		free_pages((unsigned long)dma_buffer,
			get_order(DMA_BUFFER_SZ));

	while (free_pio_buf) {
		pio_buf = free_pio_buf->next;
		kfree(free_pio_buf);
		free_pio_buf = pio_buf;
	}
}

module_init(espserial_init);
module_exit(espserial_exit);