blob: ea44396383a7f849b08cb2e6de56ab04a8ae6412 (
plain) (
tree)
|
|
/* arch/arm/mach-lh7a40x/include/mach/registers.h
*
* Copyright (C) 2004 Coastal Environmental Systems
* Copyright (C) 2004 Logic Product Development
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
#include <mach/constants.h>
#ifndef __ASM_ARCH_REGISTERS_H
#define __ASM_ARCH_REGISTERS_H
/* Physical register base addresses */
#define AC97C_PHYS (0x80000000) /* AC97 Controller */
#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */
#define USB_PHYS (0x80000200) /* USB Client */
#define SCI_PHYS (0x80000300) /* Secure Card Interface */
#define CSC_PHYS (0x80000400) /* Clock/State Controller */
#define INTC_PHYS (0x80000500) /* Interrupt Controller */
#define UART1_PHYS (0x80000600) /* UART1 Controller */
#define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */
#define UART2_PHYS (0x80000700) /* UART2 Controller */
#define UART3_PHYS (0x80000800) /* UART3 Controller */
#define DCDC_PHYS (0x80000900) /* DC to DC Controller */
#define ACI_PHYS (0x80000a00) /* Audio Codec Interface */
#define SSP_PHYS (0x80000b00) /* Synchronous ... */
#define TIMER_PHYS (0x80000c00) /* Timer Controller */
#define RTC_PHYS (0x80000d00) /* Real-time Clock */
#define GPIO_PHYS (0x80000e00) /* General Purpose IO */
#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */
#define HRTFTC_PHYS (0x80001000) /* High-res TFT Controller (LH7A400) */
#define ALI_PHYS (0x80001000) /* Advanced LCD Interface (LH7A404) */
#define WDT_PHYS (0x80001400) /* Watchdog Timer */
#define SMC_PHYS (0x80002000) /* Static Memory Controller */
#define SDRC_PHYS (0x80002400) /* SDRAM Controller */
#define DMAC_PHYS (0x80002800) /* DMA Controller */
#define CLCDC_PHYS (0x80003000) /* Color LCD Controller */
/* Physical registers of the LH7A404 */
#define ADC_PHYS (0x80001300) /* A/D & Touchscreen Controller */
#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */
#define USBH_PHYS (0x80009000) /* USB OHCI host controller */
#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */
/*#define KBD_PHYS (0x80000e00) */
/*#define LCDICP_PHYS (0x80001000) */
/* Clock/State Controller register */
#define CSC_PWRSR __REG(CSC_PHYS + 0x00) /* Reset register & ID */
#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */
#define CSC_CLKSET __REG(CSC_PHYS + 0x20) /* Clock speed control */
#define CSC_USBDRESET __REG(CSC_PHYS + 0x4c) /* USB Device resets */
#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */
#define CSC_PWRCNT_DMAC_M2M1_EN (1<<27)
#define CSC_PWRCNT_DMAC_M2M0_EN (1<<26)
#define CSC_PWRCNT_DMAC_M2P8_EN (1<<25)
#define CSC_PWRCNT_DMAC_M2P9_EN (1<<24)
#define CSC_PWRCNT_DMAC_M2P6_EN (1<<23)
#define CSC_PWRCNT_DMAC_M2P7_EN (1<<22)
#define CSC_PWRCNT_DMAC_M2P4_EN (1<<21)
#define CSC_PWRCNT_DMAC_M2P5_EN (1<<20)
#define CSC_PWRCNT_DMAC_M2P2_EN (1<<19)
#define CSC_PWRCNT_DMAC_M2P3_EN (1<<18)
#define CSC_PWRCNT_DMAC_M2P0_EN (1<<17)
#define CSC_PWRCNT_DMAC_M2P1_EN (1<<16)
#define CSC_PWRSR_CHIPMAN_SHIFT (24)
#define CSC_PWRSR_CHIPMAN_MASK (0xff)
#define CSC_PWRSR_CHIPID_SHIFT (16)
#define CSC_PWRSR_CHIPID_MASK (0xff)
#define CSC_USBDRESET_APBRESETREG (1<<1)
#define CSC_USBDRESET_IORESETREG (1<<0)
/* Interrupt Controller registers */
#define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */
#define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */
#define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */
#define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */
/* Vectored Interrupted Controller registers */
#define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00)
#define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04)
#define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08)
#define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c)
#define VIC1_INTEN __REG(VIC1_PHYS + 0x10)
#define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14)
#define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18)
#define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c)
#define VIC1_PROTECT __REG(VIC1_PHYS + 0x20)
#define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30)
#define VIC1_NVADDR __REG(VIC1_PHYS + 0x34)
#define VIC1_VAD0 __REG(VIC1_PHYS + 0x100)
#define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200)
#define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00)
#define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04)
#define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08)
#define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c)
#define VIC2_INTEN __REG(VIC2_PHYS + 0x10)
#define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14)
#define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18)
#define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c)
#define VIC2_PROTECT __REG(VIC2_PHYS + 0x20)
#define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30)
#define VIC2_NVADDR __REG(VIC2_PHYS + 0x34)
#define VIC2_VAD0 __REG(VIC2_PHYS + 0x100)
#define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200)
#define VIC_CNTL_ENABLE (0x20)
/* USB Host registers (Open HCI compatible) */
#define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08)
/* GPIO registers */
#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */
#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */
#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */
#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */
#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */
#define GPIO_PINMUX __REG(GPIO_PHYS + 0x2c)
#define GPIO_PADD __REG(GPIO_PHYS + 0x10)
#define GPIO_PAD __REG(GPIO_PHYS + 0x00)
#define GPIO_PCD __REG(GPIO_PHYS + 0x08)
#define GPIO_PCDD __REG(GPIO_PHYS + 0x18)
#define GPIO_PEDD __REG(GPIO_PHYS + 0x24)
#define GPIO_PED __REG(GPIO_PHYS + 0x20)
/* Static Memory Controller registers */
#define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */
#define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */
#define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */
#define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */
#define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */
#define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */
#ifdef CONFIG_MACH_KEV7A400
# define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */
# define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */
# define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
# define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
# define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
# define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */
# define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08)
# define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08)
# define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a)
# define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a)
# define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c)
# define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
#endif
#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
# define CPLD_CONTROL __REG16(CPLD02_PHYS)
# define CPLD_SPI_DATA __REG16(CPLD06_PHYS)
# define CPLD_SPI_CONTROL __REG16(CPLD08_PHYS)
# define CPLD_SPI_EEPROM __REG16(CPLD0A_PHYS)
# define CPLD_INTERRUPTS __REG16(CPLD0C_PHYS) /* IRQ mask/status */
# define CPLD_BOOT_MODE __REG16(CPLD0E_PHYS)
# define CPLD_FLASH __REG16(CPLD10_PHYS)
# define CPLD_POWER_MGMT __REG16(CPLD12_PHYS)
# define CPLD_REVISION __REG16(CPLD14_PHYS)
# define CPLD_GPIO_EXT __REG16(CPLD16_PHYS)
# define CPLD_GPIO_DATA __REG16(CPLD18_PHYS)
# define CPLD_GPIO_DIR __REG16(CPLD1A_PHYS)
#endif
/* Timer registers */
#define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
#define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
#define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
#define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
#define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
#define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
#define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
#define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
#define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
#define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
#define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
#define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
#define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
#define TIMER_C_ENABLE (1<<7)
#define TIMER_C_PERIODIC (1<<6)
#define TIMER_C_FREERUNNING (0)
#define TIMER_C_2KHZ (0x00) /* 1.986 kHz */
#define TIMER_C_508KHZ (0x08)
/* GPIO registers */
#define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */
#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */
#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */
#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */
#define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */
#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */
#define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */
#endif /* _ASM_ARCH_REGISTERS_H */
|
