1 files changed, 0 insertions, 186 deletions

diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
deleted file mode 100644
index 99564c70f12..00000000000
--- a/include/asm-arm/arch-omap/board.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-omap/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004  Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <asm/arch/gpio-switch.h>
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK          0x4f01
-#define OMAP_TAG_MMC            0x4f02
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB            0x4f04
-#define OMAP_TAG_LCD            0x4f05
-#define OMAP_TAG_GPIO_SWITCH    0x4f06
-#define OMAP_TAG_UART           0x4f07
-#define OMAP_TAG_FBMEM          0x4f08
-#define OMAP_TAG_STI_CONSOLE    0x4f09
-#define OMAP_TAG_CAMERA_SENSOR  0x4f0a
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART     0x4f81
-#define OMAP_TAG_VERSION_STR    0x4f82
-
-struct omap_clock_config {
-        /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-        u8 system_clock_type;
-};
-
-struct omap_mmc_conf {
-        unsigned enabled:1;
-        /* nomux means "standard" muxing is wrong on this board, and that
-         * board-specific code handled it before common init logic.
-         */
-        unsigned nomux:1;
-        /* switch pin can be for card detect (default) or card cover */
-        unsigned cover:1;
-        /* 4 wire signaling is optional, and is only used for SD/SDIO */
-        unsigned wire4:1;
-        s16 power_pin;
-        s16 switch_pin;
-        s16 wp_pin;
-};
-
-struct omap_mmc_config {
-        struct omap_mmc_conf mmc[2];
-};
-
-struct omap_serial_console_config {
-        u8 console_uart;
-        u32 console_speed;
-};
-
-struct omap_sti_console_config {
-        unsigned enable:1;
-        u8 channel;
-};
-
-struct omap_camera_sensor_config {
-        u16 reset_gpio;
-        int (*power_on)(void * data);
-        int (*power_off)(void * data);
-};
-
-struct omap_usb_config {
-        /* Configure drivers according to the connectors on your board:
-         *  - "A" connector (rectagular)
-         *      ... for host/OHCI use, set "register_host".
-         *  - "B" connector (squarish) or "Mini-B"
-         *      ... for device/gadget use, set "register_dev".
-         *  - "Mini-AB" connector (very similar to Mini-B)
-         *      ... for OTG use as device OR host, initialize "otg"
-         */
-        unsigned        register_host:1;
-        unsigned        register_dev:1;
-        u8              otg;    /* port number, 1-based:  usb1 == 2 */
-
-        u8              hmc_mode;
-
-        /* implicitly true if otg:  host supports remote wakeup? */
-        u8              rwc;
-
-        /* signaling pins used to talk to transceiver on usbN:
-         *  0 == usbN unused
-         *  2 == usb0-only, using internal transceiver
-         *  3 == 3 wire bidirectional
-         *  4 == 4 wire bidirectional
-         *  6 == 6 wire unidirectional (or TLL)
-         */
-        u8              pins[3];
-};
-
-struct omap_lcd_config {
-        char panel_name[16];
-        char ctrl_name[16];
-        s16  nreset_gpio;
-        u8   data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-        int default_intensity;
-        int (*set_power)(struct device *dev, int state);
-        int (*check_fb)(struct fb_info *fb);
-};
-
-struct omap_fbmem_config {
-        u32 start;
-        u32 size;
-};
-
-struct omap_pwm_led_platform_data {
-        const char *name;
-        int intensity_timer;
-        int blink_timer;
-        void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
-        char name[12];
-        u16 gpio;
-        int flags:4;
-        int type:4;
-        int key_code:24; /* Linux key code */
-};
-
-struct omap_uart_config {
-        /* Bit field of UARTs present; bit 0 --> UART1 */
-        unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
-        char part_table[0];
-};
-
-struct omap_boot_reason_config {
-        char reason_str[12];
-};
-
-struct omap_version_config {
-        char component[12];
-        char version[12];
-};
-
-
-#include <asm/arch/board-nokia.h>
-
-struct omap_board_config_entry {
-        u16 tag;
-        u16 len;
-        u8  data[0];
-};
-
-struct omap_board_config_kernel {
-        u16 tag;
-        const void *data;
-};
-
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-        ((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-        ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif