3 files changed, 19 insertions, 12 deletions

diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 4374168b75b..b1537000a10 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -555,6 +555,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
                                         dp_clock = dig_connector->dp_clock;
                                 }
                         }
+/* this might work properly with the new pll algo */
 #if 0 /* doesn't work properly on some laptops */
                         /* use recommended ref_div for ss */
                         if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
@@ -572,6 +573,11 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
                                         adjusted_clock = mode->clock * 2;
                                 if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
                                         pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
+                                /* rv515 needs more testing with this option */
+                                if (rdev->family != CHIP_RV515) {
+                                        if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+                                                pll->flags |= RADEON_PLL_IS_LCD;
+                                }
                         } else {
                                 if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
                                         pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
@@ -951,8 +957,16 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode
         /* adjust pixel clock as needed */
         adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss);
 
-        radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
-                                  &ref_div, &post_div);
+        /* rv515 seems happier with the old algo */
+        if (rdev->family == CHIP_RV515)
+                radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+                                          &ref_div, &post_div);
+        else if (ASIC_IS_AVIVO(rdev))
+                radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+                                         &ref_div, &post_div);
+        else
+                radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+                                          &ref_div, &post_div);
 
         atombios_crtc_program_ss(crtc, ATOM_DISABLE, radeon_crtc->pll_id, &ss);
 
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 52777902bbc..4dc9c518c2f 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1163,16 +1163,6 @@ bool radeon_atom_get_clock_info(struct drm_device *dev)
                                 p1pll->pll_out_min = 64800;
                         else
                                 p1pll->pll_out_min = 20000;
-                } else if (p1pll->pll_out_min > 64800) {
-                        /* Limiting the pll output range is a good thing generally as
-                         * it limits the number of possible pll combinations for a given
-                         * frequency presumably to the ones that work best on each card.
-                         * However, certain duallink DVI monitors seem to like
-                         * pll combinations that would be limited by this at least on
-                         * pre-DCE 3.0 r6xx hardware.  This might need to be adjusted per
-                         * family.
-                         */
-                        p1pll->pll_out_min = 64800;
                 }
 
                 p1pll->pll_in_min =
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 5fda820959e..2eff98cfd72 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -935,6 +935,9 @@ void radeon_compute_pll_legacy(struct radeon_pll *pll,
                 pll_out_max = pll->pll_out_max;
         }
 
+        if (pll_out_min > 64800)
+                pll_out_min = 64800;
+
         if (pll->flags & RADEON_PLL_USE_REF_DIV)
                 min_ref_div = max_ref_div = pll->reference_div;
         else {