[PATCH] sky2: add Yukon-EC ultra support

Add support for Yukon-EC Ultra chip as implemented in SysKonnect's
driver version 8.26.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 26 insertions, 1 deletions

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index e6f71c1232b..aff347f1ea4 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -114,9 +114,11 @@ static const struct pci_device_id sky2_id_table[] = {
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) },
+        { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) },
         { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) },
+        { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) },
         { 0 }
 };
 
@@ -130,6 +132,7 @@ static const char *yukon_name[] = {
         [CHIP_ID_YUKON_LITE - CHIP_ID_YUKON] = "Lite",  /* 0xb0 */
         [CHIP_ID_YUKON_LP - CHIP_ID_YUKON] = "LP",      /* 0xb2 */
         [CHIP_ID_YUKON_XL - CHIP_ID_YUKON] = "XL",      /* 0xb3 */
+        [CHIP_ID_YUKON_EC_U - CHIP_ID_YUKON] = "EC Ultra", /* 0xb4 */
 
         [CHIP_ID_YUKON_EC - CHIP_ID_YUKON] = "EC",      /* 0xb6 */
         [CHIP_ID_YUKON_FE - CHIP_ID_YUKON] = "FE",      /* 0xb7 */
@@ -599,6 +602,18 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
         /* Configure Tx MAC FIFO */
         sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
         sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
+
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+                sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
+                sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
+                if (hw->dev[port]->mtu > ETH_DATA_LEN) {
+                        /* set Tx GMAC FIFO Almost Empty Threshold */
+                        sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180);
+                        /* Disable Store & Forward mode for TX */
+                        sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
+                }
+        }
+
 }
 
 static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, size_t len)
@@ -984,6 +999,10 @@ static int sky2_up(struct net_device *dev)
                     RB_RST_SET);
 
         sky2_qset(hw, txqaddr[port], 0x600);
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U)
+                sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
+
+
         sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
                            TX_RING_SIZE - 1);
 
@@ -1553,6 +1572,9 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
         if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
                 return -EINVAL;
 
+        if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
+                return -EINVAL;
+
         if (!netif_running(dev)) {
                 dev->mtu = new_mtu;
                 return 0;
@@ -1972,6 +1994,7 @@ static inline u32 sky2_khz(const struct sky2_hw *hw)
 {
         switch (hw->chip_id) {
         case CHIP_ID_YUKON_EC:
+        case CHIP_ID_YUKON_EC_U:
                 return 125000;  /* 125 Mhz */
         case CHIP_ID_YUKON_FE:
                 return 100000;  /* 100 Mhz */
@@ -2796,7 +2819,9 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 
         sky2->port = port;
 
-        dev->features |= NETIF_F_LLTX | NETIF_F_TSO;
+        dev->features |= NETIF_F_LLTX;
+        if (hw->chip_id != CHIP_ID_YUKON_EC_U)
+                dev->features |= NETIF_F_TSO;
         if (highmem)
                 dev->features |= NETIF_F_HIGHDMA;
         dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;